Vertical Cable Organizer with Finger Ducts - 0U - 6
ft.
Product ID: CMVER40UF
This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple and space-efficient way to
organize the cables in your server rack. You can attach the two-panel cable manager vertically into your
rack, to neatly guide cables between equipment that’s mounted at different heights.
The 0U cable manager offers versatile installation options and is compatible with most racks that are 40U
or larger. The panels feature a 0U design that doesn’t take up any mounting space, and with simple tool-
less installation, they’re easy to attach or reposition as necessary.
Improve the appearance and accessibility of your rack
The vertical cable manager uses a finger-duct method of cable management, which includes a cover panel
that neatly conceals the cables that are running through it.
Having well organized and routed cables not only improves the appearance and accessibility of your rack,
it also makes it easier for you to install, access and maintain rack components.
www.startech.com
1 800 265 1844
Configurable installation options
This versatile cable management system consists of two 3-foot panels, so you can configure each panel as
needed to accommodate all of your equipment. You can install the individual panels end to end (top to
bottom) so that they span the height of your rack, or on either side or the front and back of your rack to
manage cables in multiple locations.
The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between
equipment that’s mounted at different heights. This provides a tidy and well-organized way to run cables
from devices mounted toward the bottom of your rack to other devices mounted near the top, without
leaving a mess of cables hanging in between.
Hassle-free compatibility with your rack
For maximum compatibility with virtually any server rack, you can install the cable-management panels
using mounting holes that are commonly found on most rack equipment. The tool-less
mounting method attaches the cable management panel to the keyhole-shaped mounting holes that
are built into your rack.
www.startech.com
1 800 265 1844
The horizontal mounting rail method attaches the cable
management panel to the horizontal mounting rails that run
along the side of your rack.
For racks that don't
support these installation
methods, you can also
mount the cable
management panels
through other
means, such as using the
non-standardized holes
found on your rack walls
and enclosures, or the
rack units on equipment
mounting rails.
Protect your equipment
Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable
damage or connection loss, and reduces strain on equipment ports, preventing damage to your expensive
rack-mounted devices.
Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to
keep your equipment running at optimal temperatures to reduce the probability of damage caused by
your rack overheating.
The CMVER40UF is backed by a StarTech.com 2-year warranty and free lifetime technical support.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
• Guide cables from a server that’s mounted toward the bottom of your
rack to patch panels that are mounted near the top
• Run cables in your rack to the side, in order to improve airflow
• Keep rack-mounted equipment accessible
Features
• Improve the appearance of your rack using a vertical cable manager
with finger ducts
• Promote passive cooling in your rack by organizing cables to improve
airflow
• Make your rack more accessible by organizing your cables for hasslefree maintenance and scalability
• Helps eliminate cable stress, to protect your equipment from
damages caused by sudden cable tension
• 6-feet (40U) in height
www.startech.com
1 800 265 1844
Warranty 2 Years
Hardware Frame Type Steel and Plastic
Mounting Options Front Mount (Front and Rear)
Orientation Vertical
U Height 40U
Physical
Characteristics
Color Black
Enclosure Type Steel and Plastic
Product Height 2.9 in [73 mm]
Product Length 3.9 in [100 mm]
Product Weight 146.5 oz [4150 g]
Product Width 67.1 in [1704.4 mm]
Packaging
Information
Shipping (Package) Weight 11.1 lb [5 kg]
What's in the Box Included in Package 2 - vertical cable organizers
8 - M5 cage nuts
8 - M5 cage screws
4 - M4 nuts
1 - instruction manual
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...