Instruction manual
Tool-Less Dual 2.5” SSD/HDD to 3.5” Mounting Bracket
BRACKET225PT
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging contents
• 1 x dual 2.5 in. SSD or HDD to 3.5 in. mounting bracket
• 6 x plastic pegs
• 1 x instruction manual
System requirements
• Computer case with an available 3.5 in. hard drive bay
• One or two 2.5 in. SSDs or HDDs
System requirements are subject to change. For the latest
requirements, please visit www.startech.com/BRACKET225PT.
Product overview
Install the drive and bracket
Warning! Hard drives and storage enclosures should be handled
carefully, especially when they’re transported. If you’re not careful
with your drives, you may experience lost data as a result. Always
handle storage devices with caution. Make sure that you’re properly
grounded by wearing an anti-static strap when you install any
computer component. If an anti-static strap isn’t available, touch a
large grounded metal surface for several seconds to discharge any
built-up static electricity.
1. Remove the plastic piece with the six pegs attached to it from the
mounting bracket.
2. Pull the six pegs o of the plastic post and discard the post.
3. Align your SSD or HDD with the tenons (plastic projections) on
the mounting bracket, and gently push the drive into place.
4. If necessary, repeat steps 3 and 4 for a second drive.
5. Turn o your computer and any peripherals that are connected
to it (for example, printers, external hard drives, and so on).
6. Unplug the power cable from the back of your computer.
7. Disconnect any peripheral devices that are connected to your
computer.
8. Place the bracket into the 3.5 in. hard drive slot and use the
included six pegs to secure the drive in place.
9. Connect a power connection from the computer’s power supply
to the drive’s power connector.
10. Use the appropriate cable and connect the drive to the host
controller.
11. Place the cover back onto your computer case.
12. Reconnect the power cable to the back of your computer and
reconnect all of the peripheral devices that you previously
disconnected.
13. Turn on your computer and any peripherals that are connected
to it.
*actual product may vary from photos
For the latest information, technical specications, and support for this
product, please visit www.startech.com/BRACKET225PT.
You don’t need to install a driver, as your computer’s operating
system should detect the drive and install it automatically.
Manual Revision: 07/22/2015
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Loading...