Monitor Mount with Articulating Arm
and Laptop Riser
ARMUNONB
*actual product may vary from photos
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/ARMUNONB.
Manual Revision: 05/26/2016
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction manual
Table of Contents
Introduction ............................................................................................1
Product diagram ........................................................................................................................................ 1
Technical specications ..........................................................................................................................3
Package contents ...................................................................................................................................... 4
Installation requirements ....................................................................................................................... 5
Assembly .................................................................................................6
Warning statements .................................................................................................................................6
Attach the clamp to a desk or table ................................................................................................... 6
Attach the laptop tray to the swivel arm ..........................................................................................7
Attach the swivel arm to the pole and clamp ................................................................................. 8
Attach the extension arm ....................................................................................................................... 10
Attach a display to the spring arm ...................................................................................................... 11
Attach the spring arm to the extension arm ................................................................................... 12
Adjust the height tension of the spring arm ................................................................................... 13
Adjust the swivel tension of the display mount ............................................................................ 14
Route the cables ........................................................................................................................................ 15
Technical support ................................................................................... 16
Warranty information ............................................................................16
Instruction manual
i
Introduction
The ARMUNONB oers a convenient and easy way to raise your laptop and monitor o
of your desk. The ARMUNONB is straightforward to put together and the sturdy design
provides a safe way to mount your monitor and laptop.
Product diagram
Spring arm
Monitor mount
Cable manager
Pole
Rubber pads
Instruction manual
Extension arm
Height-adjustment ring
Cable-management clip (pole)
Swivel arm
Laptop tray
1
Desk clamp
Clamping knob
Base
Clamp screw
Instruction manual
2
Technical specications
Type of measurement Measurement
Display size
Monitor mount weight capacity
Laptop tray weight capacity
Tilt
Swivel
Rotate
Between 15 and 27 in.
(381 mm and 686 mm)
Up to 17.6 lb. (8 kg)
Up to 17.6 lb. (8 kg)
-90 / +85
180
360
Instruction manual
VESA monitor mount
75 by 75 mm hole pattern
100 by 100 mm hole pattern
3
Package contents
1
Swivel arm
Qty: One
4 5
Spring arm
Qty: One
7 8
M4x30 screws
Qty: Four
10
Cable-management clip
(pole)
Qty: One
13
2
Extension arm
Pole and clamp
M5x12 screws
11
M3 Allen key
Qty: One
Qty: One
Qty: Four
Qty: One
3
Laptop tray
Qty: One
6
M4x12 screws
Qty: Four
9
M6x25 screw
Qty: One
12
M5 Allen key
Qty: One
1514
M5 nuts
Qty: Four
Instruction manual
Height-adjustment ring
(ships installed on the
pole and clamp)
Qty: One
4
Spacers
Qty: Four
16 17 18
Cable-management clip
(laptop arm)
Qt y: Two
19
Instruction manual
Qty: One
Rubber pads
Qty: Four
Plastic cap
Qty: One
Installation requirements
• Phillips screwdriver
• Adjustable wrench
Installation requirements are subject to change. For the latest requirements, please
visit www.StarTech.com/ARMUNONB.
Instruction manual
5
Assembly
Warning statements
Make sure to assemble the ARMUNONB according to the following instructions. Failure
to do so may result in personal injury or property damage.
If you exceed the weight capacity of the monitor mount or the laptop tray, the
ARMUNONB may not work as expected and you could experience personal injury or
property damage.
Never operate the ARMUNONB if parts are missing or damaged.
Attach the clamp to a desk or table
Note: The desk clamp can be attached to a desk or table up to a thickness of 9 cm
(90 mm).
1. Turn the clamping knob on the pole and clamp (5) counterclockwise until the clamp
can slide over the edge of the desk or table.
2. Slide the pole and clamp all the way onto the desk or table.
3. To tighten the clamp, turn the clamping knob clockwise until the clamp is securely
fastened to the desk. (gure 1)
gure 1
Pole and clamp
Clamping knob
Instruction manual
6
Attach the laptop tray to the swivel arm
1. Insert the four M5x12 screws (8) through the laptop tray (3) and into the four holes
in the VESA mount on the swivel arm (1).
2. Thread the four M5 nuts (13) onto the M5x12 screws. (gure 2)
3. Use a wrench to tighten the M5 nuts.
4. Remove the backing from the four rubber pads (17) and ax them to the laptop
tray where appropriate to prevent the laptop from slipping. (gure 3)
gure 2
M5x12 screws
Laptop tray
VESA mount
Swivel arm
gure 3
Rubber pad
Instruction manual
Laptop tray
7
Attach the swivel arm to the pole and clamp
1. Turn the adjustable collar on the height-adjustment ring (14) counterclockwise and
pull the height-adjustment ring o of the pole and clamp (5). (gure 4)
2. Slide the swivel arm (1) down the pole and clamp. (gure 5)
3. When the swivel arm is at the desired height, use the M5 Allen key (11) to turn the
screw in the swivel arm clockwise to tighten it in place. (gure 6)
gure 4
gure 5
Adjustable collar
Swivel arm
Pole and clamp
Height-adjustment ring
Pole and clamp
Instruction manual
8
gure 6
M5 Allen key
Instruction manual
Swivel arm
9
Attach the extension arm
1. Slide the height-adjustment ring (14) down the pole and clamp (5) until it’s at the
height that you want the extension arm to sit at.
2. Turn the adjustable collar on the height-adjustment ring clockwise to tighten it in
place.
3. Slide the extension arm (2) down the pole until it’s sitting on the height-adjustment
ring. (gure 7)
4. To change the swivel tension of the extension arm, use the M3 Allen key (11) to turn
the screws in the extension arm clockwise or counterclockwise. (gure 8)
gure 7
Extension arm
Adjustable collar
Height-adjustment ring
Instruction manual
Pole and clamp
gure 8
M3 Allen key
10
Attach a display to the spring arm
Caution! To prevent scratching, you should handle the surface of the display with care
when you attach it to the spring arm.
If you exceed the weight capacity of the mount, the ARMUNONB may not work as
expected and you could experience personal injury or property damage.
1. Do one of the following:
• If the VESA mount sits ush against the installation surface on the display,
insert the four M4x12 screws (6) through the VESA mount on the spring arm
(4) and into the mounting holes on the back of the display. Use a Phillips
screwdriver to tighten the screws. (gure 9)
• If the VESA mount doesn’t sit ush against the installation surface on the
display, you need to use the provided spacers. Insert the four M4x30 screws (7)
through the VESA mount on the spring arm (4), into the four spacers (15), and
into the mounting holes on the back of the display. Use a Phillips screwdriver
to tighten the screws. (gure 10)
gure 9
M4x12 screw
VESA mount
Display
gure 10
M4x30 screw
VESA mount
Display
Instruction manual
Spacer
11
Attach the spring arm to the extension arm
1. Carefully lift the spring arm (4) with the display attached and place it onto the
extension arm (2). (gure 11)
2. Insert the M6x25 screw (9) through the extension arm, the spring arm, and into the
plastic cap (18). (gure 12)
3. Use a screwdriver to tighten the M6x25 screw.
gure 11
Spring arm
Extension arm
gure 12
Plastic cap
Spring arm
Instruction manual
Extension arm
M6x25 screw
12
Adjust the height tension of the spring arm
You can adjust the height tension of the spring arm to make sure that the display stays
in place, regardless of the weight of the display.
1. If the display doesn’t stay in place or the movement is sti, do one of the following:
• To increase the tension, use the M5 Allen key (12) to turn the screw in the
spring arm (4) clockwise. (gure 13)
• To decrease the tension, use the M5 Allen key (12) to turn the screw in the
spring arm (4) counterclockwise. (gure 13)
gure 13
M5 Allen key
Spring arm
Instruction manual
13
Adjust the swivel tension of the display mount
• To change the swivel tension of the display mount, use the M5 Allen key (12)
to turn the screw on the top of the VESA mount clockwise or counterclockwise.
(gure 14)
gure 14
M5 Allen key
Instruction manual
14
Route the cables
Warning! Make sure that you leave enough slack at the arm joints so that the arms can
be fully extended.
Make sure that the cables that you’re routing are unplugged before you complete the
following steps.
1. Pull out the cable rungs on the spring arm (4) and thread the display cable through
the rungs.
2. Thread the display cable through the cavity in the underside of the extension arm
(2).
3. Hold the display cable against the pole and clamp (5) while you slide the cablemanagement clip (pole) (10) over the cable and onto the pole.
4. Snap the cable-management clip (laptop arm) (16) onto the swivel arm (1).
5. Run the laptop power cable along the swivel arm and through the hook in the
cable-management clip (laptop arm).
6. To adjust the placement of cable-management clip (laptop arm) on the swivel arm,
slide the cable-management clip left or right. (gure 15)
gure 15
Spring arm
Extension arm
Cable-management
clip (pole)
Pole and clamp
Instruction manual
Cable-management clip
(swivel arm)
15
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction manual
16
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Loading...