Startech 6ASPAT5MBK Product Data Sheet

CAT6a Ethernet Cable

Product ID: 6ASPAT5MBK

This CAT6a Ethernet cable meets all Category 6a cable specifications. It ensures reliable 10Gb connections

between your network devices.

Shield Your Network

Tested for up to 500MHz frequency, each CAT6a cable is more than suitable for 10GBase-T Ethernet

networks.

Built for quality performance, the cable features 100% copper and foil-shielded, twisted-pair wiring. The

cable is designed to keep the data signals traveling through your network free from noise and

interference. It's perfect in environments that are prone to large amounts of electromagnetic interference

(EMI/RFI).

www.startech.com

1 800 265 1844

Protect Your Equipment

This CAT6a patch cable is built using 100% copper wire and is tested to comply with ANSI/TIA 568 C.2

Category 6a requirements. We don’t use copper-clad aluminum (CCA) wire which is subject to problems

like weak power delivery, heat buildup, equipment damage and possibly fire.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or

corrosion.

Easily Install Your Network Cables

For trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips

during installation, making them less likely to snag or break.

The CAT6a Ethernet cable also features moulded boots which offer strain relief by stopping the RJ45

connectors from bending at sharp angles. This reduces the risk of cable damage, which could decrease

network connectivity and performance.

6ASPAT5MBK is backed by StarTech.com’s lifetime warranty for guaranteed reliability.

www.startech.com

1 800 265 1844