Page 1
2.5" to 3.5" Hard Drive Adapter - For SATA and SAS
SSDs/HDDs
Product ID: 25SATSAS35HD
This 2.5" to 3.5" hard drive adapter lets you install a 2.5" SATA or SAS hard drive (HDD) or solid-state
drive (SSD) into an internal or external 3.5" drive bay, using standard drive-mounting holes.
Convert a 2.5" drive into a 3.5" drive
The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD
into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance
storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for
system administrators who want to build a system that takes advantage of the increased performance of
a 2.5" HDD/SSD.
To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to
6Gbps.
www.startech.com
1 800 265 1844
Page 2
Easy and flexible installation
You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It
offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is
installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required.
The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be
made to look and function like a 3.5" drive.
Identify and track your drives
The adapter includes a label you can use to track and record information about the installed drive.
The 25SATSAS35HD is backed by a StarTech.com 2-year warranty and free lifetime technical support.
www.startech.com
1 800 265 1844
Page 3
Certifications, Reports
and Compatibility
Applications
• Install a 2.5" SATA/SAS drive in a 3.5" drive bay
Features
• Supports 2.5" form factor drives up to 15 mm in height
• Installs into an internal or external 3.5" drive bay; uses standard
mounting holes for internal installs
• Tool-less 2.5" drive installation
• Supports SATA I, II and III (up to 6Gbps) and SAS I and II (up to
6Gbps)
www.startech.com
1 800 265 1844
Page 4
Warranty 2 Years
Hardware Compatible Drive Types SAS & SATA
Drive Installation Removable
Drive Size 2.5in & 3.5in
Fan(s) No
Front Door Key Lock No
Interface SATA
SAS
Number of 2.5 inch bays 1
Number of Drives 1
Supported Drive Height(s) 7mm
9.5mm
12.5mm
15mm
Performance 4Kn Support Yes
Hot Swap Capability Yes
S.M.A.R.T. Support Yes
TRIM Support Yes
Type and Rate SATA/SAS 6 Gbps
Connector(s) Drive Connectors 1 - SFF-8482 (29 pin, Data & Power, Internal SAS)
Receptacle
Host Connectors 1 - 22 pin SATA / SAS Data + Power (7 + 15 pin)
Receptacle
Special Notes /
Requirements
Note Although mobile racks can enable a Serial Attached SCSI
(SAS) drive to connect using a standard Serial ATA (SATA)
connector, the drive controller must be SAS compatible to
properly support SAS drives. SAS controllers can work with
SAS and SATA drives, but most SAS drives will only work
with a SAS controller.
Environmental Humidity 5% ~ 65%
Operating Temperature 0°C to 55°C (32°F to 131°F)
Storage Temperature -20°C to 55°C (-4°F to 131°F)
Physical
Characteristics
Color Silver & Black
Enclosure Type Aluminum and Plastic
www.startech.com
1 800 265 1844
Page 5
Product Height 1 in [26 mm]
Product Length 5.7 in [146 mm]
Product Weight 8.9 oz [252 g]
Product Width 4 in [101 mm]
Packaging
Information
Shipping (Package) Weight 8.9 oz [252 g]
What's in the Box Included in Package 1 - hard drive adapter
1 - set of mounting hardware
1 - quick-start guide
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...