Start ZCM2000 series, ZCM2200 series User Manual

ZCM2000/M2200 Series

CONTENTS

Read this user’s manual before use to ensure proper operation. Keep the manual on hand
for reference in case there is a problem.

Warrenty/Repair Policy

Notice

Warning

Description of Control Panel Functions
Operation
Maintenance

Exploded Views/Parts Breakdown

Page 2
Page 3
Page 4
Page 5-7

Page 8-12
Page 13-15
Page 16

WARRANTY POLICY FOR LD SERIES LABEL DISPENSERS

START International warrants all parts on ZCM series tape dispensers against defects in design,
materials and work manship for a period of 360 days. Parts excluded from this are: cutting blades,
silicone rollers and cutter liners; these parts are considered “wear parts”. Labor to replace defective

parts will be performed at no charge for the rst 180 days after date of purchase. Warranty does not

cover transportation costs.
START International’s sole obligation under this warranty is limited to repair, replacement or credit

of the purchase price, at our option, which do not properly perform the function for which they were
designed.

Warranty repair is contingent upon START’s examination and determination that alleged defects have

not been caused by misuse, abuse, improper installation or application, repair, alteration, accident or
neglect in use, storage, transportation or handling.

The above warranty and remedy constitutes START International’s sole liability hereunder and are in
lieu and exclusive of all other warranties and remedies expressed, implied, or statutory , including, but

not limited to, those of merchantability and tness for a particular purpose.

REPAIR POLICY

Contact START INTERNATIONAL to determine nature of problem.
Furnish START with the following information:

1. Who the unit was purchased from.

2. Model number and serial number.

3. Date purchased (copy of invoice or packing slip required).
START will issue an RMA (Return Material Authorization) for the repair. Return machine to START

by freight, insured and prepaid. START will notify the customer if there is a repair charge.A $25.00
evaluation charge will apply to all non-warranty repairs, which will be applied to repair change.

For the full Warranty & Repair policy please visit www.STARTinternational.com

2

NOTICE

This instruction manual is for START lnternational Tape Dispensers, models No.: zcM 1000,

zcM2000, zcM 1100 and zcM2200. Refer to the following comparison chart for model differ-

ences:

PRODUCT COMPARISON

• Keep strip plate free of adhesive build-up.

• Clean photosensor with compressed air or dry cloth.

• Do not drop the dispenser or subject it to heavy shock.

• Turn off machine when not in use.

WARNING

3

WARNING

4

DESCRIPTION OF CONTROL PANEL FUNCTIONS

5