starsat SR-X1000HD Premium User Manual
NXP HD I 1
Content
Safety Precaution ...........................................................................................2
1. Reference
1.1 General Features .............................................................................3
1.2 Accessories .....................................................................................4
2. Basic Function
2.1 Front Panel ......................................................................................5
2.2 Rear Panel ......................................................................................6
2.3 Remote Control Unit ........................................................................7
3. Installation and Connection
3.1 Connecting to TV ............................................................................9
3.2 Connecting to Dish LNB .................................. ......... ........ .......... ....10
4. Installation and Operation
4.1 Installation .....................................................................................12
4.2 Channel manager .........................................................................18
4.3 System setting ..............................................................................19
4.4 Game .............................................................................................20
4.5 USB ...............................................................................................23
4.6 CA Menu .......................................................................................27
4.7 Other Useful Information .............................................................. 27
5. Additional Information
5.1 Problem Solving .......................................................................... 32
5.2 Technical Specification ................................................................33
5.3 Menu Screen Structure.................................................................35
5.4 Glossary .......................................................................................36
NXP HD I 2
Safety Precaution
This STB has been designe d and manufactured to satisf y the internati onal
safety standards. Please read the following safety precautions carefully
before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90~250V AC
50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use
damaged power cord or touch it with wet hand as this may result in electric
shock.
Liquid:
The receiver shall not be exposed to dr ippi n g or splash ing water, an d that no
objects filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the
unit. Do not put the receiver on soft furnishings or carpets. Do not expose the
receiver to direct light or do not place it n ear a heater or in humid conditi ons.
Do not stack other electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver
by a soft cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB
or disconnect it from LNB. Failure would possibly cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact
qualified and licensed service personnel to repair the receiver, or contact
your dealer.
NXP HD I 3
1. Reference
1.1 General Features
DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264)
SCPC & MCPC receivable from Ku and C band satellites
Universal, Single, Single S & C Band Wideband LNB
Sensitive Tuner with Loop-Through
DiSEq C 1.0/1.1/1.2/1.3 (USALS)
Unicable Supported
Blind search supported.
Multi satellite search, network search, PID search, manual search and
Multi-TP Search
Fast Scan on Astra (19.2)
Auto DiSEqC Search
PAL/SECAM/NTSC Conversion
Variable aspect ratio (4:3,16:9)with PAN& SCAN vector or letter BOX option
Output Resolution: 480p&480i,576p & 576i, 720p&1080i50Hz,720p
&1080i60Hz
True full Color (32 bits)on screen display (OSD)
Storing memory: 100 satellite, 4000 transponders an d 10000 channels
Supported satellite add, delete, move, rename
Supported transponder add, delete, edit
8 favorite group and parental lock supported.
Supported programmed lock, delete, move, rename.
Supported multi-language menu
Supported list of programmers, have six sort function:
Easy functions such as Group Move/ Recall History
Multi-language audio.
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD.
Multi-Picture supported
Software (data, kernel and file system) upgrade through USB or Ethernet
USB 2.0 Interface
1.2 Accessories
Users manual
Batteries
Remote Control Unit
A/V Cable
HDMI Cable
NXP HD I 4
Figure 1.Accessories
2. Basic Function
2.1 Front Panel
Figure 2. Front Panel
1. Power Button
The POWER button is used to turn the power on or to make it on Standby Mode.
2.
Power LED
Power indicator.
3. Signal LED
Signal indicator.
4. Display(VFD)
The VFD displays channel information. In Standby mode the VFD displays local
NXP HD I 5
2.2 Rear Panel
Figure 3. Rear Panel
1. LNB IN
Connect the Satellite Dish LNB.
2. LOOP OUT
Output the Dish LNB IN signal.
3. RS232
Connect to serial port of PC for software upgrade.
4. TV SCART,
Connect to TV set with Scart cables.
5. AUDIO, VIDEO
Connect to Audio/Video of TV. Connect Yellow to Video port, connect Red
and White to Audio Right and Audio Left.
6. S/PDIF
Digital Audio output.
7. HDMI
HD signal output
8. LAN
LAN for Ethernet.
9. USB2.0
One USB 2.0 Host Port.
NXP HD I 6
2.3 Remote Control Unit(RCU)
You can control this receiver by this remote controller with full function.
1. POWER :
Swith the receiver on or off.
2. :
Setting the time for turning the receiver off.
3.PVR
Enter into recoding information.
4.MUTE : Turn
The sound On/Off.
5. NUMERIC KEY (0~9):
Change program or input number.
4. TV/RADIO:
Switch between TV and RADIO.
5. SAT:
Show the scanned satellite list.
6. AUDIO :
Select or change the Audio.
7.ZOOM:
Picture Zooming function.
8. PAUSE:
Freeze the picture.
9. INFO (i):
Show the information of the current channel.
Press EXIT button to exit this menu.
10. RECALL:
Move to the previous viewed channel.
11. FAV:
To get favorite channel list you set before.
12. EPG (Electronic Program Guide):
Show the TV/Radio program guide.
Figure 4. Remote Control Unit
13.SUB: Subtitle.
14. PAGE :
Change page up or down
NXP HD I 7
15. F1 :No function.
16. TXT:
show the teletext content if teletext is transmitted.
17. CH +/-:
Change program.
18. VOL +/-:
Change volume in viewing mode.
19. OK:
Confirm the highlighted menu item.
Open the program list.
20. MENU:
Activate main menu or exit to live channel.
21. EXIT :
Exit current menu step by step.
22. TIMER:
Enter timer event directly
23. DISPAY:
Switch the TV type.
24. MODE :
Switch 4:3 & 16:9 Screen Formats.
25. USB :
Showing Subtitle information if the channels contains.
26. FIND :、
Find the channel quickly
27.
:
Multi picture display.
28.: Fast backward.
29. : Fast forward
24. : Start playing / Release pause
25. ■:
Stop recording
26. I : Play previous item
27. I:Play next item.
28. I I: Pause/ Time shift
29.●: Start recording
NXP HD I 8
3. Installation and Connection
T he following diagram shows you the connections amon g receiver, TV,
LNB and other equipment, please read this first if you are not sure about the
connection, and it will guide you to the correct connection.
3.1 Connecting to TV
Figure 5. Connecting to TV
NXP HD I 9
3.2 Connecting to Dish LNB
You can connect one fixed dish LNB directly to the LNB IN, or connect
at least two dish LNB by DiSEqC Switch, you can also conn ect to HH mount
dish LNB.
Figure 6. Connecting to Dish LNB
NXP HD I 10
Figure7. Connecting to Dish LNB
NXP HD I 11
4. Installation and Operation
After connecting the rec eiver to other required equipment, turn on the
receiver, there should be no channel information available at the first startup,
you need to follow the procedure to setup your receiver to search the
channel.
NXP HD I 12
can make Satellite Search,
: Satellite List
, you can see the presorted
Main Menu
Press MENU button to activate main menu,
main menu consists of Installation, Channel
manager, system setting, Time Setting,
Expansion, Interface.
Use UP/DOWN button to select your subject and press OK to confirm your
selection and enter that sub menu, press EXIT button you can return to the
previous menu.
4.1 Installation
Select Installation, press OK button to activate
Installation menu, the Installation window will
be displayed.
A: Antenna Setting
Press OK to Enter Antenna Setting; here you
Satellite Edit, blind Search and other Functions.
a
Enter this picture
Satellite list, in this menu, you can select, add,
move, rename, delete Satellites.
Loading...