This STB has been designed and manufactured to satisfy the international
safety standards. Please read the following safety precautions carefully before
operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90~250V AC
50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged
power cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no
objects filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit.
Do not put the receiver on soft furnishings or carpets. Do not expose the
receiver to direct light or do not place it near a heater or in humid conditions. Do
not stack other electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by
a soft cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or
disconnect it from LNB. Failure would possibly cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified
and licensed service personnel to repair the receiver, or contact your dealer.
-3-
1. Reference
1.1 General Features
MPEG-2 & Fully DVB Compliant
MPEG-2 Video (MP@ML), MPEG-1 Audio Layer1, Layer2
Multi LNB Control by DiSEqC 1.0,1.2, 1.3
LNB Power 13/18V Max 500mA
SCPC/MCPC Receivable from C / Ku-Band Satellites
PAL/NTSC Conversion
Variable Aspect Ratio (4:3,16:9) for TV
4-digi 7-segment LED Display
RS232 Port for Updating Software and Additional Information
User Friendly OSD Menu with Full Function
256 Colors Graphic User Interface
Multi Language Menu
7-Days EPG (Electronic Program Guide) for On-Screen Channel Information
Time shift and PIP Record
Super Fast 800 Pages OSD Teletext Supported and VBI Teletext Inserted
Favorite Channel and Parent Lock Function
Storing 6100 Channels.
ZOOM Function
5 Kinds of Sort Function
-4-
1.2 Accessories
Users manual
Batteries
A/V Cable
Remote Control Unit
Figure 1. Accessories
-5-
2. Basic Function
2.1 Front Panel
Figure 2. Front Panel
1. Power LED
Power indicator.
2. Display (4-digi 7-segment)
4-digi displays channel information. In Standby mode the 7-segment displays local time.
3. Power Button
The POWER button is used to turn the power on or to make it on Standby Mode
4.
/ CH- / CH+ Button
Change channel in viewing mode and move the cursor up/down in menu mode.
-6-
2.2 Rear Panel
Figure 3. Rear Panel
Figure 3. Rear Panel
1. LNB IN
Connect the Satellite Dish LNB.
2. TV/VCR
Connect to TV set or VCR with Scart cables
3. AUDIO, VIDEO
Connect to Audio/Video of TV. Connect Yellow to Video port, connect Red and White to
Audio Right and Audio Left.
4.
RS232
Connect to serial port of PC for software upgrade.
5. LOOP OUT
Output the Dish LNB IN signal.
6. ANT
Connect to TV Antenna
7. 0/12V
Supply 12V DC to other apparatus.
8. ON/OFF
Power on/off.
-7-
2.3 Remote Control Unit(RCU)
You can control this receiver by this remote controller with full function.
1. POWER:
Switch the receiver on or set it to standby mode.
2. MUTE
3. NUMERIC KEY (0~9):
Change program or input number.
4. SUB:
: Turn the sound On/Off.
Showing Subtitle information if the channels
contains.
5. TV/R:Switch between TV and RADIO.
6. :
7. : Play previous item/ Play next item.
8. OK: Confirm the selected operation or display
Moves up/down in menu mode.
the channel list while watching a programme.
9. FAV: Display favorite channel list.
10. EPG (Electronic Program Guide):
Show the TV/Radio program guide.
11.EXIT: Exit current menu step by step.
12. MENU: Activate main menu or exit to live
channel.
13. CH+/CH-(UP/Down): Change program.
14. RECALL:
Move to the previous viewed channel.
15. VOL+/VOL- :
Change volume in viewing mode.
16. STOP: Stop recording/play.
Figure 4. Remote Control Unit
-8-
17. : Fast backward.
18. : Fast forward.
19.I I/: Play/time shift.
20. REC: Start PIP recording.
21. USB:Enter USB menu.
22. MP3: enter into MP3 list.
23. JPEG: enter into Picture list.
24. PVR LIST: enter into Movie list.
25. AUDIO:Select or change the Audio.
26. PAUSE:Freeze the picture.
27. SAT: Show the scanned satellite list.
28. TXT:Show the teletext content if teletext is transmitted.
29.PGUP\PGDN: Page up/down on menu.
30.F1: No function.
31.F2:No function.
32: F3: No function.
33: PIP: Picture in Picture
-9-
3. Installation and Connection
The following diagram shows you the connections among receiver, TV, LNB and
other equipment, please read this first if you are not sure about the connection,
and it will guide you to the correct connection.
3.1 Connecting to TV
Figure 5. Connecting to TV
-10-
3.2 Connecting to Dish LNB
You can connect one fixed dish LNB directly to the LNB IN, or connect at least
two dish LNB by DiSEqC Switch, you can also connect to HH mount dish LNB.
Figure 6. Connecting to Dish LNB
-11-
Figure 7. Connecting to Dish LNB
-12-
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.