Star Manufacturing EC14PB-240V Installation Manual

EGG COOKER

MODEL

EC14PB-240V

Installation and

Operation

Instructions

2M-Z11369 Rev. - 2/1/08

EC14PB-240V

1

2

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]
Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

The Star Service Help Desk

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

GENERAL SPECIFICATIONS

A

E

B

C

D

IL1440

Trough

Power

Switch

Program

Timers

Display

Scrap Pan

Scrap

Hole

Tool Bin

Top Cover

Egg Rings /
Egg Cracker

Egg
Rack

Grill

IL1441

(A) Width Inches

Model No Grill Surface

EC14PB-240V Alum. 23.22 (59) 18.76 (47.7) 8.82 (22.4) 23.97 (60.9) 15.25 (38.7)

Model No Voltage Wattage Amps NEMA Plug

EC14PB-240V 240V 2150 8.96 6-15P TBD

(cm)

(B) Depth Inches

(cm)

(C) Closed Inches

(cm)

(D) Open Inches

(cm)

Approximate Weight

Shipping lbs. (kg) Installed lbs. (kg)

GRILL COMPONENTS

(E) Grill Width

Inches (cm)

3

CAUTION

Front

Tool Bin

Scrap Pan

Top Cover
& Egg Rack

IL1443

WARNING

GENERAL INSTALLATION DATA

This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor
for use directly by the general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels

associated with the unit prior to putting it into operation. Make sure all people associated
with its use understand the units operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed.
This unit has been tested and carefully packaged to insure delivery of your unit in perfect
condition. If equipment is received in damaged condition, either apparent or concealed,
a claim must be made with the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is
unpacked, a request for inspection of concealed damage must be made with carrier within
1

5 days. Be certain to retain all contents plus external and internal packaging materials for

inspection. The carrier will make an inspection and will supply necessary claim forms.

INSTALLATION

1. This grill/steamer is equipped for the voltage shown on the nameplate.

It will operate on alternating current only, however the specied voltage must be applied.

2. 240 volt units do not require a dedicated 240 VAC circuit with a 15 Amp receptacle.

DO NOT CONNECT THE UNIT TO ANY TYPE OF VOLTAGE OTHER THAN THAT
ON THE NAMEPLATE. DOING SO WILL DAMAGE THE UNIT AND VOID THE
WARRANTY.

UNPACKING

. The unit will arrive completely assembled, remove unit from it packaging and conrm all

1

necessary parts are present and in good working condition. If damage occurred during
shipping please contact carrier within 15 days, be certain to keep all packaging for there
inspection.

2. Remove the scrap pan, tool bin and top cover / egg rack assembly from the unit by
lossening the thumb screws, as shown here and clean using warm water and mild
detergent, rinse toughly.

3

. Once dry, reassembly all parts.

INITIAL START UP

Before using the unit for the rst

time, wipe down the exterior and
grilling area with a damp cloth.
Take to a well ventilated area
and heat for approximately
30 minutes. The grill may emit
a small amount of smoke as
the cooking surfaces reach the
setpoint temperature of 300°F
(149°C). Do not be alarmed,
as the smoke is caused
by oils associated with the
manufacturing process and
will stop when the burn off is
complete. Brush off any debris from the grilling surface.

Once cooled move to permant location and level unit using the adjustable feet under the
unit (approximately

1/2" adjustment).

4