Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Model No. BTU Rating Type Connection
Natural Propane
615FD 30,000/HR 30,000/HR 3/8” N.P.T Female (1 cm)
630FD 70,000/HR 65,000/HR 1/2" N.P.T. Female
Fryers have nickel plated steel kettle with a 1/4 turn drain valve. Kettle has copper fins attached to the bottom for maximum heat transfer and efficiency. Fryers are equipped with one-piece in shot burners, gas thermostat, hi-limit safety thermostat, twin baskets and a
universal valve that is a combination safety valve, pilot control and main burner valve, 4" high die cast legs with a 1-3/8" adjustment are
standard. Fryers available for use on natural gas or propane. Units are AGA certified and listed by the National Sanitation Foundation
and certified by CGA. Printed in the U.S.A.
Model Overall Dimensions Approximate Weight
No. (A) (B) (C)
Width Depth Height Installed Shipping
Inches Inches Inches Ibs. Ibs.
(cm) (cm) (cm) (kg) (kg)
615FD 12 25-1/8 23-3/8 64 75
(30.5) (64) (59) (29.1) (34.1)
630FD 24 25-1/8 23-3/8 110 118
(61) (64) (59) (50) (54)
Model Fat Container Foam Compartment
No. Width Depth Height Width Depth Height
Inches Inches Inches Inches Inches Inches
(cm) (cm) (cm) (cm) (cm) (cm)
615FD 10-1/5 12-1/2 4-3/4 11-1/2 18 2-3/4
(26.7) (31.8) (12.1) (29.2) (45.7) (7 )
630FD 20-7/8 12-1/2 4-3/4 21-7/8 18 2-3/4
(53) (32) (12) (56) (46) (7)
Model No. Pre-Heat to 350oF (177oC) Fat Capacity Pounds of French BTU's Per Hour To
Ibs. Fries Per Hour Maintain 350oF (177oC)
(kg) Ibs.
(kg)
615FD 14 Minutes 15 28
4900
(6.8) (12.7)
630FD 12 Minutes 30 65 5500
(13.6) (29.5)
Gas Data
Performance Data
Dimensions & Weight
Typical Specifications
STAR-MAX GAS FRYERS
Models 615FD & 630FD
®
A
C B
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as
a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .