Starfit Body Fat Scale Instructions For Use Manual
Body Fat Scale
Instructions for use
The scale is specially designed to test body fat, hydration, muscle and bone
percentages and to help you keep a close eye on the daily changes of your
body fat, hydration, muscle, bone and weight. Based on the analysis of your
height, weight, age, etc., it calculates your daily energy requirement, and can
be used as a helpful tool to control your weight. Please read this instruction
manual carefully before use.
Helpful tips
A. The device is designed to allow auto step on. The first time you use the
scale please ignore the initial reading as this may reflect the factory set-
tings. The scale will be accurate as of the second use.
B. For better results, always remove your shoes and socks.
C. It is advisable to always take measurement at the same time of the day.
D. Readings can be misleading after intensive exercise, excessive dieting
or under extreme dehydration.
E. Always weigh/use the scale on a hard and flat surface. When you are on
the weighing platform, please keep still.
1
1. Size of LCD screen: 160 x 30 mm / 6.25 x 1.15 inches
2. High precision: 0,2 lb / 100 g
3. Multifunction: test body fat %, body hydration %, body muscle %,
body bone % and suggest daily calorie intake requirement
4. Built-in memory for 12 different users
5. Optional normal weighing mode (bypassing parameter setting): Auto
step on weighing and consecutive add-on weighings
6. Low battery and overload indicators
7. Last immediate memory recall
8. Compare current result to the last record
9. Daily calorie intake: the data reading indicates the energy you need to sustain
the daily metabolis and ordinary activities required for your weight, height,
age and sex.
Features/Specifications
2
F. For children under 10 or adults over 100, the scale can only be used in
regular weighing mode.
G. For adults over 70, body builders or people with extreme fitness levels,
there may be deviations in the measured data.
Warning
The body analysis weighing mode, called Bioelectrical Impedance Analysis (BIA), which is used by this scale, determines your body fat proportion
by transferring a harmless signal all the way through your body.
A. This scale provides body analysis measures for a majority of people,
but people with the following condition should never use this scale
under this weighing mode:
• Pregnant women
• Those with symptoms of edema
• Those on dialysis treatment
• Those who use heart pacemakers or other implanted medical devices
These people should only use a scale under the regular weighing mode,
which will indicate only your body weight.
B. The fat and hydration percentages content evaluated by this body fat
scale is only for reference (not for medical purpose). If your fat and
hydration percentages content is over/below normal level, please
consult your doctor for more advice.
C. Keep away from strong electro-magnetic fields when using the scale.
D. It could be slippery if you weigh on a wet surface. Moreover,
the weighing platform surface is glazed, never step on the edge
of the scale and do keep balance during your weighing.
Performance index
Index
Item
Weighing
Capacity
Fat %
Hydration %
Muscle % Bone % Calorie
1KCAL
Index
Range
Division
200 kg
440 lb
0.1 kg
0.2 lb
4.0%
60.0%
0.1%
27.5%
66.0%
0.1%
20.0%
56.0%
0.1%
2.0%
20.0%
0.1%
3
Setting weight unit
This scale is available in kg or lb. You can
set to the one you prefer by pressing the
unit conversion button on the back of the
scale (picture shown on the left). Press
the unit conversion button when scale is
powered off. LCD shows current weight
unit. Press the button again to convert to
another weight unit.
. When setting lb as weight unit, the
default height unit is feet/inch.
. When setting kg as weight unit, the
default height unit is cm.
After selecting the preferred unit, the
scale will auto-off after 3 seconds. The
selected weight unit will be activated the
next time you turn on the scale.
To install / Replace batteries
1- Open battery case cover on the back of scale.
2- Take out the used batteries.
3- Install new batteries by putting one side of
the battery then pressing down the other side.
Please take note to the polarity.
Battery baffle
Press
Press
kg
lb
Loading...