High precision pocket scale P.2
Balance de poche haute précision P.9
Balanza de precisión P.15
INSTRUCCIONES DE USO
INSTRUCTIONS
MODE D’EMPLOI
INSTRUCTIONS FOR USE AND CARE
(Read the instructions before use)
FEATURES / SPECIFICATIONS
• High precision strain gauge sensor
• LCD Blacklight
• Zero/tare
• Low battery/overload indicator
• Auto zero/auto o
BATTERY
1X3V CR2032 lithium battery (included)
TO REPLACE BATTERY
1.
2.
3.
0pen the battery compartment
located on the back of the scale.
Take out the used battery
(with the aid of a sharp object,
if needed).
Install new battery in the
compartment. (Please pay
attention to the polarity)
LCD
Tare Weight
Negative Value
Zero Weight
3
Ounces
Grams
Ozt
Dwt
TO OPERATE
ON/OFF
1.
Place the scale on a solid, flat surface.
Avoid carpet or other soft surfaces.
2.
Press and release ON/OFF button to
switch on the unit.
3.
Wait until display prompts to 0.00
before starting weighing.
Always place the object to weight in the
4.
center of the platform.
4
To weigh dierent loads consecutively without removing loads from
the scale, put the first load on the scale to obtain a weight reading.
Press Z/T button to reset the LCD reading to "0.00" before adding
next load. You can repeat this operation.
By pressing Z/T, you can see the total weight of all loads on the scale.
If you want to weigh more loads, just press Z/T to reset LCD reading
to "0.00" again.
TO CHANGE THE UNIT OF WEIGHT MEASUREMENT
UNIT
You can press UNIT button to toggle the
weight measure between gram, oz, dwt
or ozt.
5
"ZERO" OR "TARE" FUNCTION
To weigh dierent loads consecutively without removing loads from
the scale, put the first load on the scale to obtain a weight reading.
Press Z/T button to reset the LCD reading to "0.00" before adding
next load. You can repeat this operation.
By pressing Z/T, you can see the total weight of all loads on the scale.
If you want to weigh more loads, just press Z/T to reset LCD reading
to "0.00" again.
Z/T
Z/T
6
AUTO SHUT OFF
MANUAL SHUT OFF
ON/OFF
Auto shut-o occurs if display shows '0' or
shows the same weight reading for 2 minutes.
To maximize battery life, always press
ON/OFF to turn o the scale after using.
WARNING INDICATORS
Indicates Low battery power.
1.
1.
2.
Replace new battery.
Indicates scale over load. Remove the
2.
object to avoid damage. Maximum weight
capacity is indicated on the scale.
7
CLEANING AND CARE
• Clean the scale with a slightly damp cloth. DO NOT immerse the
scale in water or use chemical/abrasive cleaning agents.
• The scale is high precision device. It is delicated built and extremely
sensitive.Please avoid dropping the unit or subject the unit to
violent impact which will damage it.
SUBSCRIBE TO THE NEWSLETTER
TO LEARN MORE ABOUT OUR PROMOTIONS!
WWW.
PRINTED IN CHINA FOR : ATLANTIC PROMOTIONS INC. LONGUEUIL (QUÉBEC) J4G 1V6
CUSTOMER SERVICE : 1-800-361-6232 / MTL AREA : (514) 871-1095
.COM
8
Loading...