Technical:
Voltage: AC110-220V, 50-60HZ
Power: 100W
Channel: 8CH
Light power: 9pcs*10W R,G,B,W 4IN1 led
Material: plastic
Control mode: DMX512, sound, auto, master-slave
LED Stage Light Equipment User Manual
LED DIGITAL PAR LIGHT
■9pcs RGBW４in1
Please Read Over This Manual before Operating the Light Fixture
Diagram Instruction
A： Function Selection Key
B： Plus Key
8.8.8.8.
C： Minus Key
D： Confirm Save Key
O O O O
A B C D
DMX-512 Function Instruction 8 Channels-modify CH7 allows device synchronization）
Cha
nnel
CH1 0--255 Total dimming
CH2 0--255
CH3 0--255
CH4 0--255
CH5 0--255
CH6 0 No strobe
CH7
CH8 0-255 Macro LED speed from low to fast
Device Feature Setting
Value Function Instruction
（RED） dimming
（GREEN） dimming
（BLUE） dimming
（White） dimming
1-255 Strobe speed from low to fast
0 macro
CH1-CH6 channel color selection modes on（ CH6 strobe setting）
function off
1-255
macro
function
effectively;
CH1-CH6
Function
off
1—29 ：4 colors hopping mode
30—59 : full color hopping mode
60—89 ： full color gradient mode
90—119: variable pulse mode
120-149: hopping, gradient,
variable pulse modes combination
150-179 :gradient strobe mode
（built fast strobe）
180—--199 save disabled
246—250 sound mode—
hopping sound control
251--255 sound mode—
strobe sound control
200-245 follow strobe
mode:23 different selections
（please set the total
numbers of the units and
numbers ）
200-229 choose 1 colors
from 9
230-243 choose 1 colors
from 13
244-245 recycle effect
DISPLAY Function Instruction
D001 all numbers DMX512 mode, master-slave
HOST or SLAV signal condition
EO。01 each
group setting as
the actual total
E-。01 each group
setting as the
actual place
EE． 00
T．0-255
A．0-255
C．0-255
J．0-255
L．0-255
N．0-255
P．0-255
1S . 0-20 Sound mode 1: voice strobe
2S．0-20 Sound mode 2： Voice hopping
R．0-255
G．0-255
B．0-255
W. 0-255
F．0-255
synchronization mode
setting, B.C Key
modify sett ing
Follow strobe mode total units
setting
（follow strobe mode parameters
requires）
Follow strobe mode total number
setting
（ follow strobe mode
parameters requires）
Follow strobe mode: There are
23 kinds of effects can choose
(please set the total number of
units and number)
Follow strobe speed setting
4 colors hopping mode
full color hopping mode
full color gradient mode
variable pulse mode
hopping, gradient, variable pulse
modes combination
gradient strobe mode
（built fixed fast strobe）
Color selection mode：red dimming
setting
Color selection mode：green dimming
setting
Color selection mode：blue dimming
setting
Color selection mode：white dimming
setting
Strobe model
HOST Host running when signal output
SLAV
B，C Key to modify the address code value
（001-512）
No signal out put； master-slave
synchronization mode set as” SLAV”
B，C key to modify to total units of the follow
Each group is set according to the actual
gross (total numbe r of units must all be set to
the same value)
B，C key to modify to numbers of th e follow
strobe devices （NO.01-32） values do not
repeat, can not exceed the total maximum
number of units Valley Equipment
B，C Key to modify the effect o f follow strobe
（0-22） 0-8：choose 1 from 9 colors；
9-21： choose 1 from 13 effects 22：
recycle effects
B，C Key to modify the speed of follow
strobe
B，C Key to modify the change speed of L ED
（from slow to fast）
B，C Key to modify Sound Sensitivity（020）
B，C Key to modify colors sel ectio n（0-255）
（No strobe）
B，C Key to modify the speed of colors
selection and strobe
strobe devices（01-32 units） The
equipment involved in follow strobe
Loading...