Star FS1R, FS1D, FS1DT, FS1RT, FS2R Installation And Operation Instructions Manual

FAST

STEAMER

MODEL

FS1R, FS1D, FS1RT, FS1DT
FS2R, FS2D, FS2RT, FS2DT

FSFR, FSFD, FSFRT, FSFDT

Installation and

Operation

Instructions

2M-Z10887 Rev. E 7/27/2009

FS2DT

FSFRT

1

2

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]
Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

The Star Service Help Desk

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

SPECIFICATIONS

A

C

B

A

C

B

FRONT LOADING TOP LOADING

IL1361

FAST STEAMERS SPECIFICATIONS

FRONT LOADING

Model "A" Width "B" Height "C" Depth Approx. Capacity (inches) Direct (D)
No. Inches/CM Inches/CM Inches/CM Shp Weight W_x_D_x_H Reservoir (R)

FSFR 23in. / 58.4cm 9.5in / 24.1c, 21.5in / 54.4cm 48lbs / 21.8kg 13.75" x 13.75" x 3" R
FSFD 23in. / 58.4cm 9.5in / 24.1c, 21.5in / 54.4cm 48lbs / 21.8kg 13.75" x 13.75" x 3" D
FSFRT 23in. / 58.4cm 9.5in / 24.1c, 21.5in / 54.4cm 48lbs / 21.8kg 13.75" x 13.75" x 3" R
FSFDT 23in. / 58.4cm 9.5in / 24.1c, 21.5in / 54.4cm 48lbs / 21.8kg 13.75" x 13.75" x 3" D

TOP LOADING Pan Size

FS1R 18.8in / 47.8cm 10.5in / 26.7cm 17.2in / 43.7cm 48lbs / 21.8kg 1/2 R
FS1D 18.8in / 47.8cm 10.5in / 26.7cm 17.2in / 43.7cm 48lbs / 21.8kg 1/2 D
FS1RT 18.8in / 47.8cm 10.5in / 26.7cm 17.2in / 43.7cm 48lbs / 21.8kg 1/2 R
FS1DT 18.8in / 47.8cm 10.5in / 26.7cm 17.2in / 43.7cm 48lbs / 21.8kg 1/2 D
FS2R 22.4in / 56.9cm 10.5in / 26.7cm 17.2in / 43.7cm 58lbs / 26.4kg 2/3 R
FS2D 22.4in / 56.9cm 10.5in / 26.7cm 17.2in / 43.7cm 58lbs / 26.4kg 2/3 D
FS2RT 22.4in / 56.9cm 10.5in / 26.7cm 17.2in / 43.7cm 58lbs / 26.4kg 2/3 R
FS2DT 22.4in / 56.9cm 10.5in / 26.7cm 17.2in / 43.7cm 58lbs / 26.4kg 2/3 D

ELECTRICAL SPECIFICATIONS

 FrontLoading     Certication

Model No. Voltage Wattage Amps Nema Plug UL CUL

FSF 208V 3,300 15.9 6-20P X X
FSF 240V 3,600 15.0 6-20P X X

Top Loading

Model No. Voltage Wattage Amps Nema Plug

FS1/FS2 120V 1,800 15.0 5-15P X ­ FS1/FS2 120VC 1,800 15.0 5-20P X X

3

GENERAL INFORMATION

CAUTION

This equipment is designed and sold for commercial use only by personnel trained and experienced in
its operation and is not sold for consumer use in and around the home nor for use directly by the general
public in food service locations.

Before using your new equipment read and understand all the instructions & labels associated with the
unit prior to putting it into operation. Make sure all people associated with its use understand the units
operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed. This unit has
been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is
received in damaged condition, either apparent or concealed, a claim must be made with the delivering
carrier.

Concealed damage
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.

These models are equipped for the voltage and wattage indicated on the nameplate. These units are
designed to operate on alternating current (A.C.), two wire single phase service only and are equipped
with an approved lead in cord set with a three prong grounding type plug.

or loss - if damage or loss is not apparent until after equipment is unpacked, a

DO NOT CONNECT TO DIRECT CURRENT (D.C.).

UNPACKING

Carefully remove the steamer from the shipping and packing & protective material. Remove all removable
parts and clean with hot water and mild detergent. Wipe the unit using damp cloth. Never hose down
the unit with water, this steamer has

Unit should also contain:

• Operations manual & Authorized Service Agent Listing Packet

• Inlet Hose Assembly (non-reservoir units only)

• Spatula tray (front loading units only)

Purchasers Responsibility

• To see that the electric & water services for the unit are installed on site in accordance with

the manufacturer's specications and municipal codes.

• A water pressure regulator must be used, failure to operate this unit without a regulator will
result in situations that will damage the unit.

4

INSTALLATION

ELECTRICAL CONNECTION

For your protection, we recommend that a qualified electrician install this appliance.
The electrician should be familiar with electrical installations and your local electrical requirements.

Proper connections and power supply are essential for efcient performance. The supply circuit should

be properly fused as required by local electrical code.

WARNING

Before making any electrical connection be sure to read data plate which is located on the
rear of the unit.

Electrical Grounding Instructions

This unit is equipped with a 3-prong (grounded) plug for your protection against shock hazard and must
be plugged directly into a properly grounded 3-prong receptacle.

CAUTION

DO NOT CUT OR REMOVE THIS PLUG OR GROUNDED PRONG FROM THE PLUG.
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE DATA

PLATE OF THE UNIT.

PRESET TIME

If adjustments are required, please refer to the time programming section in this manual.

°F/°C CONVERSION

To change the temperature display from °F to °C or from °C to °F, hold the TEMP button while the unit is
turned off. While holding the TEMP button, turn the unit on. The display will be the changed temperature
mode. To change back, repeat the procedure.

5

INSTALLATION continued

Filter

Regulator

To Steamer

Guage

Water

Source

26 psi

IL1532

Lid

Strainer

Water Inlet

IL1537

WATER CONNECTION

These units come equipped with either a direct connect, rear mounted quick disconnect uid control

valve, or a 12 cup water tank with tank drain and supply pump. It is vital that all water supply lines be

thoroughly ushed with clean water before being connected to the steamer.

The Star Fast-Steamer has a water injection system, to ensure your new equipment works at its premium,
we recommend that a water softener is used in areas where hard water is present. Contact your local

water equipment system provider to assist you in determining your specic water quality, or contact Star

Technical

support for assistance, 1-800-807-9054.

Direct Connect Water Supply Installation

1. Make certain the water valve that
will be suppling the unit is turned
off.

2. Connect the 1/4" I.D. exible
tubing
source and secure with clamps
provided.

3. Holding the end opposite end
over

(this removes any air from the system and ushes it of any particles that may be present).

4. Turn off the water valve.

5. Push the check valve tting into the water inlet located on the rear of the unit.

Make

6. Turn on water valve, Turn the knob on the regulator until the guage reads 26 psi.
Check

to the outlet side of the water

a bucket, turn the water valve on until there is a good consistent supply of water

certain the connection is securely attached by lightly tugging on it.

for leaks.

Reservoir Water Units

1. With unit in nal position, open reservoir lid.

2. Check and make sure the reservoir is free of debris
and material that may interfere with its operation.

3. The unit comes with a washer strainer which ts

over the water inlet

(see illustration),
correctly in position. Periodically check strainer and
clean and replace as often as necessary.

4. Pour tap water into reservoir until the water level is
from the top.

1/4"

5. Closed lid.

6. Check water level during daily operation and ll as needed.

verify this is

6

OPERATING PROCEDURE

Connect your unit to a wall outlet which will supply the unit with the proper voltage specied on the data

plate. If you have a reservoir unit, verify the water level, add if water is low.

CAUTION

KEEP HANDS AND FACE AWAY FROM THE UNIT WHEN OPENING OR REMOVING THE
SPATULA FROM THE UNIT. STEAM ESCAPING IS VERY HOT.

MANUAL CONTROL

• Turn unit on

Wait 20 - 30 minutes for the unit to reach its operating temperature before using.

Note: The Temperature Set Point is factory xed at 400°F (204°C) and is not adjustable.

•

Place product in cooking chamber and hit the Steam Shot button to steam the product.

Steam Shot: Pressing the Green Steam Shot Green Button will release water in to the steam generator

and will instantly produce steam. Water will only stop when the button is released. Flooding of the
steam generator may occur if the Steam Shot button, or the SST is set to high. When this occurs wait
for the unit to work through the water before applying more water

to the steam generator.

ELECTRONIC CONTROL

• Turn unit on

Current Temperature will Flash on LED, PRESS the

TEMP button to see current temperature
TCT will FLASH until TSP (Temperature Set Point) is reached,
Alarm will sound 3-times when TSP is reached.

Note: The Temperature Set Point is factory xed at 400°F (204°C) and is not adjustable.

•

Place product in cooking chamber and choose one of the 4 pre-determined programmed

settings, or hit

• When program timing is completed, an alarm will sound.

the Steam Shot steam button to steam the product.

PROGRAMMING DEFINITIONS

TCT Total Cook Time
SIT Shot Interval Time
SST Steam Shot Time
TSP Temp Set Point

Steam Shot: Pressing the Green Steam Shot Button will release water in to the steam generator and

will instantly produce steam. Water will only stop when the button is released. Flooding of the steam
generator may occur if the Steam Shot button, or the SST is set to high. When this occurs wait for the

unit to vaporize all of the water before applying more water to the steam generator.

TIMER & STEAMER CONTROLLER OPERATION SPECIFICATIONS
Startup:

1. The preset time will ash until the operating temperature is reached.

2. When the control reaches preset temperature, time display, "Heat On" indicator and program

indicator will stop ashing and the alarm will beep three times.

Temperature:

1. To view the actual steam generator temperature, press and hold "Temp Button."

7

OPERATION continued

90 degrees

60 degrees

Cover

Stop

IL1366

To Program Time:

The program buttons factory pre-set are listed
below. If changes are required follow these
simple steps. Note, any changes to these

PROGRAMMING SPECIFICATIONS / RANGE

TCT Total Cook T
SIT Shot Interval Time .5sec to 10 minutes
SST Steam Shot Time .1 sec to 5.minutes
TSP Temp Set Point

settings are stored in the units memory until
changed. Returning to the factory pre-sets is not

available automatically.

1. Press and hold "TEMP"

(actual temperature displays).

2. While holding "TEMP,"

program button for one second, to begin

press and hold any

TCT 20 sec 40 sec 1 min 1.30 min

SIT 20

SST .5

programming

3. TCT (Total Cook Time) will

display, adjust

time with the "3 or 4" buttons.

• Press the #1 button to move to between minutes and seconds.

• Press the #1 button to move to SIT.

4. SIT

(Shot Interval Time) will

display, adjust time with the "3 or 4" buttons.

• Press the #1 button to move to between minutes and seconds.

• Press the #1 button to move to SST.

5. SST

(Steam

Shot Time) will display, adjust time with the "3 or 4" buttons.

ime 0 to 99.59 minutes

Program Button Factory Presets

1 2 3 4

sec 40 sec 40 sec 40 sec

sec .5 sec .5 sec .5 sec

• Press the #1 button to move to seconds.

6. Press

the "TEMP" button

to save time settings and to exit programming mode for this

program. Your program will not be saved if this step is not done within 10 seconds.

7. Repeat

process to program for additional programming

Hi-Limit Reset

A hi-limit reset monitors the temperature of the steam generator and will turn the power off to the unit to
prevent it from overheating. If this occurs, the unit will automatically reset when it has had enough time to
cool prior to returning to operation. If this occurs on a regular basis it may be a sign of a larger problem, call

your service agent or Star Manufacturing at

1-800-807-9054.

TOP LOADING COVER STOP

SETTINGS

Top Loading Fast Steamer models

(FS1 & FS2) are designed with

adjustable cover stops located on

the back of the units. As shown

here you can adjust your unit's

top cover between an opening

of 60° - 90°.

8

CLEANING

CAUTION

DO NOT USE CAUSTIC CLEANERS,
USE A MILD DETERGENT TO WIPE DOWN EXTERIOR SURFACES, CLEAN WITH DAMP

CLOTH

Daily

1. Turn the unit OFF & unplug the unit from its power source before proceeding with any service

or cleaning procedure.

2. Remove and clean the removable items listed on the maintenance components illustration for

your specic model. Clean using warm water and mild detergent. DRY parts completely

3. Wipe the exterior or the steamer with a damp cloth, then wipe dry. Note: drying all pieces

after cleaning will protect your nish from discoloration, any discoloration as a result from not

drying the equipment is not covered under warranty

4. Reinstall

the unit, beginning with the Steam Vent.

Monthly

The Star Fast Steamer generates instant steam by means of its open generator, however the mineral
deposits in the water are left behind. A certain amount of deposits are needed for proper operation, but a
build-up of calcium & mineral deposits may cause poor performance. It is important to properly maintain

you steamer to ensure quality operation. Depending on your specic water conditions and possibly any
water ltration systems, you may need to clean your steamer more or less frequently.

.

CAUTION

DO NOT IMMERSE OR LET THE UNIT STAND IN WATER. DO NOT HOSE DOWN
THE UNIT. KEEP THE UNIT AWAY FROM RUNNING WATER.

DO NOT SPLASH THE CONTROL HOUSING
CERTAIN WATER CONDITIONS MAY REQUIRE MORE FREQUENT CLEANING.

WARNING

BEFORE CLEANING MAKE SURE POWER IS TURNED OFF AND UNIT IS
UNPLUGGED.

CAUTION

IF A CHEMICAL CLEANER / DELIMER IS USED, BE CERTAIN IS IT SAFE FOR CAST
ALUMINUM. FOLLOW PROCEDURES, PRECAUTIONS PROVIDED WITH THAT SPECIFIC
PRODUCT.

9

Cleaning Steam Generator

Steam Generator

Steam Ports

Water Inlet

IL1359

Wing Nut
Generator

Cover

Diffuser

IL1377

1. Turn the unit OFF & unplug the unit from its
power source.

2. Remove and clean the removable items
listed on the maintenance components

illustration for your specic model. Clean

ing warm water and mild detergent.

us
DRY parts completely.

3. With the steam generator cool, use a wire
brush or scrapper to loosen the mineral/
calcium deposits on the generator surface
and steam ports. Remove the loose built­up particles from the surface and wipe area
clean with damp cloth and reassemble the
unit.

NOTE: A certain
needed on the steam generator to ensure proper
steaming characteristics. If during cleaning,
the surface becomes free of all calcium/mineral
deposits, add tap water to the generator surface
and allow it to boil off. In soft water conditions,

amount of calcium deposits are

Above: Inspect these area making sure they are
clean of deposits.

Below: Reinstall these parts before foperating the
steam feature during the cleaning procedure.

a small amount of lime will season it.
(Seasoning Mixture, .75 oz. baking soda,
.75 oz. lime, 1 quart water), use enough to
cover bottom of the steam generator, turn
unit on and allow to evaporate.

Excessive Mineral Build-up

4. Use

a delimer solution, which is safe
for cast aluminum, on the steam
generator surface. Follow the
instruction provide with the delimer
solution.

5. Use

a dry towel or sponge to remove
the delimer solution, then rinse with
clean water.

6. Install the diffuser, generator cover
secure with the wing nut as shown
here.

6. Plug

the steamer power cord into

power supply, and turn unit on.

the

7. Allow unit to reach operating
temperature.

KEEP HANDS AND FACE AWAY

CAUTION

FROM THE UNIT WHEN OPERATING THE UNIT. STEAM ESCAPING IS VERY HOT.

8. Push the Green "Steam Shot" button several times to operate the steamer.
This removes any delimer solution from the generator surface.

9. Turn unit off, reinstall all remaining parts and return unit to operation.

10

Rack

Spatula

Drip Pan

Food Compartment

Steam Generator

Steam Ports

Diffuser

Generator Cover

Top Cover

Steam Vent

Wing Nut

Liner

Typical Front Loading Steamer Shown

IL1352

CLEANING FRONT LOADING STEAMER COMPONENTS ILLUSTRATION

11

OPERATION TROUBLESHOOTING

DIAGNOSTICS FOR ELECTRONIC CONTROL STEAMERS

Shorted Temperature Probe

Open-Circuit T

No Heat/No Steam

Relay

Malfunction

Heat / No Steam Temperature

emperature Probe

To Cool

Less than 50 Ohms of resistance, if

a temperature probe is detected, the

output power will be shut-off to all relays.

if a temperature probe is detected, the

output power will be shut-off to all relays.

If relay malfunction is detected when the

temperature is below 150°F (66°C) for
30 minutes or reaches 500°F (260°C).

The output power will be shut-off to both

relays unit the error no longer occurs.

Probe Temperature is 200°F (93°C) less

than the programmed set point.

Press the “TEMP” switch,

the LED will display

“PrOB”

Press the “TEMP” switch,

the LED will display

“PrOB”

The display will blink

“rELY”

Program & Heat Indicator

Light will Flash.

If unit still does not operate contact the factory or one of its representatives or a local service
company for service or required maintenance.

12

Part# 2M-4497-2 12/06 RMS

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

FOR ASSISTANCE

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.

In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers

(Model 16PD-A Only)

* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens

(Model PO12 Only)

* Heat Lamps
* Pumps-Manual

Visit our Website at: www.star-mfg.com Email: [e-mail]

THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL

This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in
which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the
transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of
the unit.

LIMITED EQUIPMENT WARRANTY

All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited
to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair
of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken
to the closest Star service agency, transportation prepaid.

> Star will not assume any responsibility for loss of revenue.
> On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
* The warranty period for the Chrome-Max Griddles is  ve (5) years on the griddle surface. See detailed warranty provided with unit.
* The warranty period for Te on/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to

Te on/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identi ers and
point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the

“non-stick” properties of such materials.

> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts

and ninety (90) days on labor.

> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or

the Service Center's sub-agency.

> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and

Operating instructions.

> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.

PARTS WARRANTY

Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is chargeable to
the customer.

SERVICES NOT COVERED BY WARRANTY

PORTABLE EQUIPMENT

Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:

1. Travel time and mileage rendered beyond the 50 mile radius limit

2. Mileage and travel time on portable equipment (see below)

3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.

4. Installation of equipment

5. Damages due to improper installation

6. Damages from abuse or misuse

7. Operated contrary to the Operating and Installation Instructions

8. Cleaning of equipment

9. Seasoning of griddle plates

10. Voltage conversions

11. Gas conversions

12. Pilot light adjustment

13. Miscellaneous adjustments

14. Thermostat calibration and by-pass adjustment

15. Resetting of circuit breakers or safety controls or reset buttons

16. Replacement of bulbs

17. Replacement of fuses

18. Repair of damage created during transit, delivery, &
installation OR created by acts of God

* The Model 510FD Fryer.
* The Model 526TOA Toaster Oven.
* The Model J4R, 4 oz. Popcorn Machine.
* The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.

13

SK2250 Rev. C 8/30/2007

Sheet 1 of 8

WIRING DIAGRAM

FS1DT & FS2DT

COMPLETE

A

4

2

E11

E12

E1

E2

E3

E4

E7 E6 E5

RTD PROBE

1

NC3

N02

COM

6

5

2

7

3

3

3

7

8

B

B

A

3

8

9

1

1

1

2

2

1

2

6

5

ELECTRONIC

CONTROL

(BACK SIDE)

PUSH BUTTON

POWER

SWITCH

HEATER RELAY

HIGH LIMIT

THERMOSTAT

TRANSFORMER

120V/10V

120V

SOLENOID

CONTROL BOX

MOUNTING PLATE

CONTROL PANEL

MOUNTING PLATE

HEATING

ELEMENT

4

BLACK WIRE (TYP)

WHITE WIRE (TYP)

SOLENOID

RELAY

10

10

10

10

CORDSET

120V: NEMA 5-15P

(SHOWN)

120VC: NEMA 5-20P

(NOT SHOWN)

B

14

SK2250 Rev. C 8/30/2007

Sheet 2 of 8

WIRING DIAGRAM

FS1RT & FS2RT

COMPLETE

2

E11

E12

E1

E2

E3

E4

E7 E6 E5

RTD PROBE

1

NC3

N02

COM

6

5

2

7

3

3

3

7

8

B

3

8

9

1

1

1

2

2

1

2

6

5

ELECTRONIC

CONTROL

(BACK SIDE)

PUSH BUTTON

POWER

SWITCH

HEATER RELAY

TRANSFORMER

120V/10V

PUMP

RELAY

CONTROL BOX

MOUNTING PLATE

CONTROL PANEL

MOUNTING PLATE

B

120V PUMP

2

DIODE AND WIRE

PART OF PUMP

HEATING

ELEMENT

BLACK WIRE (TYP)

WHITE WIRE (TYP)

HIGH LIMIT

THERMOSTAT

10

10

10

10

CORDSET

120V: NEMA 5-15P

(SHOWN)

120VC: NEMA 5-20P

(NOT SHOWN)

B

15

SK2250 Rev. C 8/30/2007

Sheet 3 of 8

WIRING DIAGRAM

FS1D & FS2D

1

1

2

2

4

2

NC3

N02

COM

PUSH BUTTON

A

B

2

1

3

4

CONTROL BOX

MOUNTING PLATE

HIGH LIMIT

THERMOSTAT

STEAM GENERATOR

THERMOSTAT

HEATING

ELEMENT

120V SOLENOID

(SHOWN ON SIDE)

POWER

SWITCH

CONTROL PANEL

MOUNTING PLATE

BLACK WIRE (TYP)

WHITE WIRE (TYP)

CORDSET

120V: NEMA 5-15P

(SHOWN)

120VC: NEMA 5-20P

(NOT SHOWN)

B

3

1

A

C

C

16

WIRING DIAGRAM

FS1R & FS2R

SK2250 Rev. C 8/30/2007

Sheet 4 of 8

1

1

2

2

NC3

N02

COM

PUSH BUTTON

B

2

1

3

CONTROL BOX

MOUNTING PLATE

STEAM GENERATOR THERMOSTAT

STD MOUNTED ABOVE HIGH LIMIT

HEATING

ELEMENT

POWER

SWITCH

CONTROL PANEL

MOUNTING PLATE

3

1

B

STEAM GENERATOER HIGH LIMIT THERMOSTAT

STD MOUNTING BELOW THERMOSTAT

2

BLACK WIRE (TYP)

WHITE WIRE (TYP)

CORDSET

120V: NEMA 5-15P

(SHOWN)

120VC: NEMA 5-20P

(NOT SHOWN)

17

SK2250 Rev. C 8/30/2007

WIRING DIAGRAM

FSFDT

Sheet 5 of 8

NEMA 6-20P

CORDSET

FOR 208/240V

E11

E12

E1

E2

E3

E4

E7 E6 E5

RTD PROBE

NC3

N02

COM

6

5

2

7

3

3

3

7

8

B

3

8

9

1

1

1

2

2

2

6

5

ELECTRONIC

CONTROL

(BACK SIDE)

PUSH BUTTON

POWER

SWITCH

HEATER RELAY

TRANSFORMER

230V/10V

CONTROL BOX

MOUNTING PLATE

CONTROL PANEL

MOUNTING PLATE

1

5

5

6

HEATING

ELEMENT

SOLENOID

STD

MOUNTING

POSITION

(SHOWN ON

SIDE).

4

4

A

B

A

SOLENOID

RELAY

12 V

SOLENOID

HIGH LIMIT

THERMOSTAT

BLACK WIRE (TYP)

WHITE WIRE (TYP)

10

10

10

10

18

SK2250 Rev. C 8/30/2007

Sheet 6 of 8

WIRING DIAGRAM

FSFD

NEMA 6-20P

1

1

2

2

B

3

1

A

5

2

NC3

N02

COM

PUSH BUTTON

A

CORDSET FOR

208/240V

B

2

4

3

5

CONTROL BOX

MOUNTING PLATE

HIGH LIMIT

THERMOSTAT

STEAM GENERATOR

THERMOSTAT

HEATING

ELEMENT

POWER

SWITCH

CONTROL PANEL

MOUNTING PLATE

12 V SOLENOID

(SHOWN ON SIDE)

6

6

4

BLACK WIRE (TYP)

WHITE WIRE (TYP)

C

C

19

SK2250 Rev. A 8/3/2007

Sheet 7 of 8

WIRING DIAGRAM

FSFRT

NEMA 6-20P

CORDSET

FOR 208/240V

E11

E12

E1

E2

E3

E4

E7 E6 E5

RTD PROBE

NC3

N02

COM

6

5

2

7

3

3

3

7

8

B

3

8

9

1

1

1

2

2

2

6

5

ELECTRONIC

CONTROL

(BACK SIDE)

PUSH BUTTON

POWER

SWITCH

HEATER RELAY

TRANSFORMER

40 VA 230V/12V

PUMP

RELAY

CONTROL BOX

MOUNTING PLATE

CONTROL PANEL

MOUNTING PLATE

B

12V PUMP

6

DIODE AND WIRE

PART OF PUMP

1

SEE

DETAIL

A

5

5

6

HEATING

ELEMENT

A & B - 1/4" MALE

W/BLACK WIRE LEADS

C & D - 3/16" MALE

W/WHITE WIRE LEADS

DETAIL A

TRANSFORMER

INLINE FUSEHOLDER

W/4AMP FUSE

HIGH LIMIT

THERMOSTAT

BLACK WIRE (TYP)

WHITE WIRE (TYP)

10

10

10

10

20

WIRING DIAGRAM

FSFR

SK2250 Rev. C 8/30/2007

Sheet 8 of 8

NEMA 6-20P

1

1

2

2

NC3

N02

COM

PUSH BUTTON

CORDSET FOR

208/240V

B

2

3

CONTROL BOX

MOUNTING PLATE

STEAM GENERATOR THERMOSTAT

STD MOUNTED ABOVE HIGH LIMIT

HEATING

ELEMENT

POWER

SWITCH

CONTROL PANEL

MOUNTING PLATE

3

1

B

STEAM GENERATOER HIGH LIMIT THERMOSTAT

STD MOUNTING BELOW THERMOSTAT

2

SEE

DETAIL

A

1

DIODE AND WIRE

PART OF PUMP

INLINE FUSEHOLDER

W/4AMP FUSE

12 V PUMP

BLACK WIRE (TYP)

WHITE WIRE (TYP)

A & B - 1/4" MALE

W/BLACK WIRE LEADS

C & D - 3/16" MALE

W/WHITE WIRE LEADS

DETAIL A

TRANSFORMER

B

21

STAR MANUFACTURING INTERNATIONAL, INC.

Front Loading Steamer Main Body Assembly

Rev. A 10/31/07SK2276

MODEL: FSF

1

3

2

4

18

5

8

6

12

13

11

10

9

11

14

7

15

16

17

19

20

21

22

PARTS LIST July 27, 2009, Rev. E

FSFR, FSFD, FSFRT, FSFDT, Front Loading Fast Steamer Main Body

MODEL

Number

Key

Number

1 C9-Z10101 1 TOP FRONT LOADING
2 2C-Z10133 2 NUT, WING 10-24 SS FRONT LOADING
3 C9-Z10095 1 COVER, CASTING FRONT LOADING
4 C9-Z10096 1 DISPERSER FRONT LOADING

5 2C-08-07-0285 1 SCREW 10-24X3/4X3/8 TYPE 2 HEX DBL END STL FRONT LOADING

6 C9-Z10069 1 RACK, WIRE STEAMER FRONT LOADING

6 C9-FS0313 1 LINER ASSEMBLY FSF STEAMER FRONT LOADING
7 C9-FS0373 1 SPATULA ASSEMBLY FRONT LOADING
8 2B-Z10069 1 SPATULA WIRE ASSY FRONT LOADING

9 2C-Z11259 1 BOLT CARRIAGE 3/8-16X1" SS FRONT LOADING
10 2A-Z11257 1 SPATULA HANDLE TUBE FRONT LOADING
11 2A-Z11258 2 SPATULA ANGLED WASHER FRONT LOADING
12 C9-Z10103 1 SPATULA FRONT LOADING
13 C9-Z9990 1 SPATULA FRONT FRONT LOADING
14 2R-09-WB-0027 1 HANDLE-BLK 3/8-16 HD698 FRONT LOADING

15 C9-Z10105 1 DRIP TRAY FRONT LOADING

16 2C-Z6925 6 SCREW,#8 X.5 TEK HW SS FRONT LOADING

17 C9-Z11250 1 DRIP TRAY SUPPORT FSF FRONT LOADING

18 2A-Z9989 4 FOOT, 2" STEAMER FRONT LOADING

19 C9-FS0301 1 VENT ASSEMBLY FRONT LOADING
20 C9-FS0344 1 FSF CASTING ASSEMBLY 208V FRONT LOADING 208V
20 C9-FS0345 1 FSF CASTING ASSEMBLY 230V FRONT LOADING 230/240V

21 2C-3033 12 SCREW-MACH 8-32X3/4 NPST FRONT LOADING

Part

Number

Per

Unit

Description and Model Designation

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

1

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

23

STAR MANUFACTURING INTERNATIONAL, INC.

Main Body Assembly

Rev. - 7/31/07SK2281

MODEL FS1 & FS2

1

2

3

4

5

6

7

8

10

9

11

12

13

14

17

16

15

16

20

22

21

18

23

19

21

24

PARTS LIST July 27, 2009, Rev. E

MODEL

FS1R, FS1D, FS1RT, FS1DT, FS2R, FS2D, FS2RT, FS2DT Top Loading Fast Steamer Main Body

Number

Key

Number

1 2C-4063 AR SCREW 10-24X1/2 SS THP FS1 & FS2

2 C9-FS0364 1 COVER SKIN ASSY FS1
C9-FS0365 1 COVER SKIN ASSY FS2

3 2C-Z9982 1 SCREW 3/8-16X1 PHFHMS SS FS1 & FS2
4 2A-Z9955 1 HANDLE MOUNTING BLOCK FS1 & FS2
5 2R-09-WB-0027 1 HANDLE-BLK 3/8-16X1 PHFHMS SS FS1 & FS2
6 2C-9042 3 SCREW 10-24X.75 FH SS FS1 & FS2
7 C9-FS0315 1 INSIDE COVER INSERT FS2 FS2
C9-FS0316 1 INSIDE COVER INSERT FS1 FS1
8 2I-Z10033 1 FS2 COVER GASKET W/CLIPS FS2
2I-Z10034 1 FS1 COVER GASKET W/CLIPS FS1
9 2B-Z10067 1 BOTTOM GRATE FOR 1/2 PAN FS1
2B-Z5847 1 BUN RACK (SMALL) FS2
10 2D-Z10054 1 1/2 PAN 2.5DP PERF SIDES - FS1
2D-Z10241 1 PAN, 2/3 PERFORATED FS2
11 2C-Z4251 2 SCREW 8-32X3/8 RHP SS FS1 & FS2
12 C9-Z9987 1 COVER DRIP CATCH FS1/2 FS1 & FS2
13 C9-Z10488 1 PROBE HOLDER FS1/FS2 E/C - FS1RT, FS2RT, FS1DT, FS2DT
14 2C-1487 1 SCREW 6-32X1/4 RHP STL NP FS1RT, FS2RT, FS1DT, FS2DT
15 C9-Z10174 1 BOTTOM FS2 FS2
C9-Z10175 1 BOTTOM FS1 FS1
16 2C-Z6925 14 SCREW #8 X 1/2 HEX WB SS FS1 & FS2
2C-Z6925 10 SCREW,#8 X.5 TEK HW SS FS2
17 2A-Z3828 4 1" SOLID LEG FS1 & FS2
18 C9-Z10482 1 ELEMENT INSULATION FS1 FS1D, FS1DT, FS1R, FS1RT
C9-Z10483 1 ELEMENT INSULATION FS2 FS2D, FS2DT, FS2R, FS2RT
19 2C-Z2893 4 NUT 10-24 HEX STL ZP 9/16 WASHER FS1 & FS2
20 C9-Z10153 2 STEAM GENERATOR SUPPORT FS1 FS2 STEAMER FS1 & FS2
21 C9-Z10336 2 ELEMENT RETAINER FS1 FS1
C9-Z10337 2 ELEMENT RETAINER FS2 FS2
22 2A-Z6604 4 SPACER, INSULATION PLATE FS1 & FS2
23 2N-Z9983 1 ELEMENT FS1 120V 1800W FS1-120V
2N-Z9984 1 ELEMENT FS2 120V 1800W FS2-120V

Part

Number

Per

Unit

Description and Model Designation

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

1

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

25

STAR MANUFACTURING INTERNATIONAL, INC.

Control Box Assemblies
Direct Connect Water Supply

Rev. A 7/9/08SK2277

MODEL Fast Steamer

1

37

1

2

3

4

29

5

28

6

9

10

11

13

12

12

14

15

16

16

13

11

7

30

28

32

33

33

28

28

36

32

31

8

1

22

23

24

Electronic Controls

Manual Controls

Top Loading

Front Loading

26

STAR MANUFACTURING INTERNATIONAL, INC.

Control Box Assemblies
Reservoir Water Supply

Rev. - 7/16/08SK2385

MODEL Fast Steamer

6

5

11

13

12

12

14

15

16

16

13

11

32

28

30

29

39

33

35

34

38

33

36

27

32

31

28

1

10

19

17

2

20

21

7

22

3

26

8

3

23

24

1

Electronic Controls

Top Loading

Front Loading

Manual Controls

27

PARTS LIST July 27, 2009, Rev. E

FSFR, FSFD, FSFRT, FSFDT, FS1R, FS1D, FS1RT, FS1DT, FS2R, FS2D, FS2RT, FS2DT

MODEL

Top & Front Loading Fast Steamer Control Box Assemblies

Number

Key

Number

1 2C-Z4063 AR SCREW 10-24X1/2 SS THP 18-8 OR 300 SERIES
2 C9-FS0300 1 CB COVER ASSY DC DIRECT CONNECT FS1DT-120V,FS2DT-120V, FSFDT-208/240V,
FS1D-120V, FS2D-120V, FSFD-208/240V

C9-FS0377 1 CB COVER ASSY STMR W/RES FS1RT-120V, FS2RT-120V, FSFRT-208/240V,
3 2E-Z10158 2 RELAY, DPST-NO SEALED FS1DT-120V, FS2DT-120V, FSFDT-208/240V,

FS1RT-120V, FS2RT-120V, FSFRT-208/240V
4 2V-Z9981 1 SOLENOID VALVE 120V STMR FS1DT-120V, FS2DT-120V, FS1D-120V, FS2D-120V
2V-Z9988 1 SOLENOID VALVE 12V FSFD-208/240V FSFDT-208/240V
5 2T-Z10248 1 THERMOSTAT, 122F-483F FS1D, FS2D, FSFD, FS1R, FS2R, FSFR
2T-Z10839 1 HL THERMOSTAT CAP-570 FSFD-208V
6 2T-Z10839 1 HL THERMOSTAT CAP-570 ALL
7 2E-05-07-0350 1 TRANSFORMER 230V/10V 6VA FSFD-208/240V, FSFDT-208/240V
2E-05-07-0351 1 TRANSFORMER 115/10V 6VA FS1RT-120V, FS2RT-120V, FS1DT-120V,

2E-Z10170 1 TRANSFORMER, 40V 12V 115/230 FSFRT-208/240V, FSFR-208/240V

8 C9-FS0317 1 CB BTM ASSY FSF DC EC FSFDT-208/240V
C9-FS0335 1 CB BTM ASSY FS1/2 DC MAN FS1D-120V, FS2D-120V
C9-FS0339 1 CB BTM ASSY FS1/2 DC EC FS1DT, FS2DT
C9-FS0341 1 CB BTM ASSY FS1/2 R EC FS1RT, FS2RT
C9-FS0343 1 CB BTM ASSY FS1/2 R MAN FS1R, FS2R
C9-FS0351 1 CB BTM ASSY FSF DC MAN FSFD-208/240V
C9-FS0352 1 CB BTM ASSY FSF R EC FSFRT-208/240V
C9-FS0360 1 CB BTM ASSY R MAN FSFR-208/240V

9 2K-Z10080 1 Q-D FEMALE/3/8 HOSE PANEL FS1DT-120V,FS2DT-120V, FSFDT-208/240V,
FS1D-120V, FS2D-120V, FSFD-208/240V
10 C9-FS0311 1 CNTR BOX BACK ASSY FS1RT-120V, FS2RT-120V, FSFRT-208/240V,
FS1R-120V, FS2R-120V, FSFR-208/240V
C9-FS0314 1 CB BACK PNL ASSY DC FS1DT-120V,FS2DT-120V, FSFDT-208/240V,
FS1D-120V, FS2D-120V, FSFD-208/240V
11 2E-Z1858 1 SWITCH-LIGHTED ALL
12 2M-Z10244 1 CNTR PANEL LABEL E/C FS1DT-120V, FS2DT-120V, FSFDT-208/240V,
FS1RT-120V, FS2RT-120V, FSFRT-208/240V
12 2M-Z10245 1 CNTR PANEL LABEL MANUAL FS1D-120V, FS2D-120V, FSFD-208/240V,
FS1R-120V, FS2R-120V, FSFR-208/240V
13 C9-FS0320 1 CNTR PANEL ASSY E/C FS1DT-120V, FS2DT-120V, FSFDT-208/240V,
FS1RT-120V, FS2RT-120V, FSFRT-208/240V
C9-Z10484 1 CNTR PANEL ASSY M/C FS1D-120V, FS2D-120V, FSFD-208/240V,
FS1R-120V, FS2R-120V, FSFR-208/240V
14 2K-Z1971 4 SPACER .257X.75X.25 NYLON FS1DT-120V, FS2DT-120V, FSFDT-208/240V,
FS1RT-120V, FS2RT-120V, FSFRT-208/240V
15 2J-Z9794 1 STMR CNTR BOARD FS1DT-120V, FS2DT-120V, FSFDT-208/240V,
FS1RT-120V, FS2RT-120V, FSFRT-208/240V

16 2E-Z9991 1 SNAP PUSHBUTTON ASSY ALL

17 C9-Z10486 1 TANK LID FSF FS1/2 STMR FS1RT-120V, FS2RT-120V, FSFRT-208/240V,
FS1R-120V, FS2R-120V, FSFR-208/240V
19 A3-35219 1 CAP & CHAIN FS1RT-120V, FS2RT-120V, FSFRT-208/240V,
FS1R-120V, FS2R-120V, FSFR-208/240V
20 2C-Z2893 1 NUT 10-24 HEX STL ZP 9/16 WASHER FSFD-208/240V, FSFDT-208/240V, FSFR-208/240V,
FSFRT-208/240V
21 C9-Z10481 1 PROBE/BULD HOLD DOWN BRKT FSFD-208/240V, FSFDT-208/240V, FSFR-208/240V,
FSFRT-208/240V

Part

Number

FS1R-120V, FS2R-120V, FSFR-208/240V

FS2DT-120V

Per

Unit

Description and Model Designation

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

28

PARTS LIST July 27, 2009, Rev. E

FSFR, FSFD, FSFRT, FSFDT, FS1R, FS1D, FS1RT, FS1DT, FS2R, FS2D, FS2RT, FS2DT

MODEL

Top & Front Loading Fast Steamer Control Box Assemblies

Number

Key

Number

22 A5-RG2036 1 CORD SET 120V W/TERMINALS, 120V
C9-FS0357 1 CORD SET 120VCSA 120VC
C9-FS0362 1 CORD SET 12/3 6-20 6' , 208/240V 208/240V
23 2K-Z2895 1 BUSHING HEYCO OCB-500 FS1D, FS1DT, FS1R, FS1RT, FS2D, FS2DT, FS2R,
FS2R

23 2K-Y6764 1 BUSHING - STRAIN RELIEF FSFD, FSFDT, FSFR, FSFRT

24 C9-FS0359 1 CORD SET 14/3 5-20P 6FT 120V-CUL
C9-Z10457 1 CORDSET MTG PLATE .88X.77 FS1D-120V, FS1DT-120V, FS1R-120V, FS1RT-120V,

C9-Z10458 1 CORDSET MTG PLATE .88X.844 FSFD-208240V, FSFDT-208/240V, FSFR-208/240V,
FSFRT-208/240V
26 C9-Z10220 2 PUMP MOUNTING STRAP FS1RT-120V, FS2RT-120V, FSFRT-208/240V,

27 2U-Z10070 1 WATER PUMP, STMR 12V FSFRT-208/240V, FSFR-208/240V
2U-Z9980 1 WATER PUMP, 120V FS1R-120V, FS1RS-120V, FS1RT-120V,

28 2C-Z10240 4 CLAMP, HOSE 7/16-25/32 FS1D-120V, FS1DT-120V, FS1R-120V, FS1RT-120V,
FS2D-120V, FS2DT-120V, FS2R-120V, FS2RT-120V
2C-Z10240 8 CLAMP, HOSE 7/16-25/32 FSFD-208/240V, FSFDT-208/240V, FSFR-208/240V,
FSFRT-208/240V
29 C9-Z10237 1 PUMP INLET HOSE FS1R, FS1RT, FS2R, FS2RT, FSFR, FSFRT
C9-Z10246 1 SOLENOID INLET HOSE FS1DT­ 30 C9-Z10238 1 FSF PUMP OUTLET HOSE FSF STMR FSFRT-208/240V, FSFR-208/240V
C9-Z10247 1 FS1/FS2 OUTLET HOSE FS1/FS2
C9-Z10456 1 FSF SOK OUT / TEE OUT HOSE FSFD, FSFDT
31 2K-Z9986 1 UNION TEE, 3/8 SLIP-ON DBL HSE BARB-STMR FSFD-208V
32 C9-Z10456 2 FSF SOL OUT/TEE OUT HOSE FSF STMR FSFD-208/240V, FSFDT-208/240V
C9-Z10456 1 FSF SOL OUT/TEE OUT HOSE FSF STMR FSFR-208/240V, FSFRT-208/240V
33 2A-Z9972 2 NIPPLE, PTFE 5.5" FSFD, FSFDT, FSFR, FSFRT
34 2E-Z10855 1 FUSE 4AMP .25X1.25 FSFRT-208/240V, FSFR-208/240V

35 C9-FS0308 1 FUSEHOLDER WIRE ASSY F/F FSFRT-208/240V
C9-FS0330 1 FUSEHOLDER WIRE ASSY M/F FSFR-208/240V

36 2K-Z9978 1 HALF NIPPLE 1/8X2.5 FS1D, FS1DT, FS1R, FS1RT, FS2D, FS2DT, FS2R,
FS2RT
37 2V-Z10448 1 STMR WATER SUPPLY HOSE FS1DT-120V, FS2DT-120V, FSFDT-208/240V,
FS1D-120V, FS2D-120V, FSFD-208/240V
38 2E-Z3278 1 RTD PROBE - 48" LONG WIRE FS1DT, FS2DT, FS1RT, FS2RT, FSFDT, FSFRT
39 2I-Z11785 1 STRAINER, WASHER FS1RT-120V, FS2RT-120V, FSFRT-208/240V,

Part

Number

FS2D-120V, FS2DT-120V, FS2R-120V, FS2RT-120V

FS1R-120V, FS2R-120V, FSFR-208/240V

Per

Unit

Description and Model Designation

T

FS2RT-120V, FS2R-120V

FS1R-120V, FS2R-120V, FSFR-208/240V

2

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

29

STAR MANUFACTURING INTERNATIONAL, INC.

Hinge Bracket Assembly

Rev. - 8/28/07SK2315

MODEL FS1 & FS2

9

8

7

5

4

6

3

2

2

1

30

PARTS LIST July 27, 2009, Rev. E

FS1R, FS1D, FS1RT, FS1DT, FS2R, FS2D, FS2RT, FS2DT

MODEL

Top Loading Fast Steamer Hinge Assemblies

Number

Key

Number

1 2A-Z10454 1 CENTER HINGE PIN FS1 FS1
2A-Z10677 1 CENTER HINGE PIN FS2 FS2
2 2A-Z10214 2 PIN, SPRING STEAMER ALL FS1 & FS2
3 C9-Z10156 2 HINGE/COVER BRACKET ALL FS1 & FS2
4 2C-Z10215 8 COTTER PIN 18-8 5/16 .059 ALL FS1 & FS2
5 2A-Z9992 2 HINGE PIN, OUTSIDE ALL FS1 & FS2
6 2C-Z4063 AR SCREW 10-24X1/2 SS THP
7 2P-Z10217 2 FS1 FS2 HINGE SPRING ALL FS1 & FS2
8 2A-Z11241 8 SCREW SHLDR 8-32X3/16X3 ALL FS1 & FS2
9 C9-Z11242 2 HINGE STOP BRACKET ALL FS1 & FS2

Part

Number

Per

Unit

Description and Model Designation

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

1

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

31

STAR MANUFACTURING GROUP

Star - Holman - Lang - Wells - Bloomeld

10 Sunnen Drive, St. Louis, MO 63143 U.S.A.

[phone] [phone]

Parts & Service [phone]

www.star-mfg.com