SPLIT LID TABLE TOP
TWO SIDED TOASTER
MODEL
CG5SSPT-120V
Installation and
Operation
Instructions
2M-Z11700 Rev. A 11/20/08
CG5SSPT-120V
1
2
These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to
ensure faster service.
SAFETY SYMBOL
Model No.
Serial No.
Voltage
Purchase Date
Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:
Telephone: (800) 807-9054 Local (314) 781-2777
Fax: (800) 396-2677 Local (314) 781-2714
E-mail Parts@star-mfg.com
Service@star-mfg.com
Warranty@star-mfg.com
Website: www.star-mfg.com
The Star Service Help Desk
Authorized Service Agent
Reference the listing provided with the unit
or
for an updated listing go to:
Website: www.star-mfg.com
E-mail Service@star-mfg.com
Telephone: (800) 807-9054 Local (314) 781-2777
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
GENERAL SPECIFICATIONS
(A) Width
TOASTER
Model No
CG5SSPT-120V Aluminum 16" (40.6)
Surface
Inches
(cm)
(B) Depth
Inches
(cm)
23 1/8"
(58.7)
(C) Closed
Inches
(cm)
14 1/4"
(36.3)
(D) Open
Inches
(cm) Voltage Wattage Amps
31 5/8"
(80.3)
120V 1,400 11.7 5-15P 51 (23.13) 38 (17.24)
NEMA
Plug
Approximate Weight
Shipping
lbs. (kg)
Installed
lbs. (kg)
3
GENERAL INSTALLATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor
for use directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels
associated with the unit prior to putting it into operation. Make sure all people associated
with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed.
This unit has been tested and carefully packaged to insure delivery of your unit in perfect
condition. If equipment is received in damaged condition, either apparent or concealed, a
claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is
unpacked, a request for inspection of concealed damage must be made with carrier within
15 days. Be certain to retain all contents plus external and internal packaging materials for
inspection.
INSTALLATION
1. This two sided toaster is equipped for the voltage shown on the nameplate. It will
operate on alternating current only, however the specied voltage must be applied.
The carrier will make an inspection and will supply necessary claim forms.
2. 120 volt units must be plugged into a 12
0 VAC line with a 15 Amp receptacle.
WARNING
DO NOT CONNECT THE UNIT TO ANY TYPE OF VOLTAGE OTHER THAN THAT
ON THE NAMEPLATE. DOING SO WILL DAMAGE THE UNIT AND VOID THE
WARRANTY.
INITIAL START UP
Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).
Before using the unit for the rst time, wipe down the exterior and toasting area with a
damp cloth. T
toaster may emit a small amount of smoke as the cooking surface reaches its set point of
450°F (
manufacturing process and will stop when the burn off is complete. Brush off any debris
from the toasting surface.
232°C). Do not be alarmed, as the smoke is caused by oils associated with the
ake to a well ventilated area and heat for approximately 30 minutes. The
SEASONING THE COOKING SURFACES (NON CHROME SURFACES)
Follow your company/corporate guidelines for seasoning cooking surfaces. or
FIRST TIME SEASONING
1. Bring the toaster to 300°F (149°C) and leave it on while doing the next two steps.
2. Brush the cooking surfaces with a SALT-FREE release agent. If using an aerosol agent,
rst apply into a cup and then brush onto cooking surface.
3. Let sit for 20 minutes, and then wipe clean using a warm damp cloth.
DAILY SEASONING
The toaster should not require much seasoning while in use. In most cases, brush a light coating
of a SALT-FREE baking release agent in the morning and occasionally throughout the day will
be enough to prevent any sticking. It is not necessary to brush before toasting each item.
4