Star BT4 Installation Manual

®

SOLID STATE

®

®

®

®

IL1544

SLOT TOASTER

MODEL

T2, T4

CT4 & BT4

Installation and

Operation

Instructions

2M-Z11894 Rev. - 2/05/2013

BT4

1

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specications and product design without

notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the specications contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions

reached as a result of using the specications. By using the information
provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when

you call to ensure a faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone]
Fax: [phone]

E-mail [e-mail]

[e-mail]

[e-mail]

Website: www.star-mfg.com

Service Help Desk

Authorized Service Agent Listing

Reference the listing provided with the unit

or
for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]

Mailing Address: Star International Holdings Inc., Company

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

IL1543

A

B

C

36” NEMA Cord & Plug

9.375” (23.83 CM)

A

B

C

36” NEMA Cord & Plug

9.375” (23.83 CM)

Solid State, 2 & 4 Slot, Pop-Up Toasters

SPECIFICATIONS:

Holman

Model Slots

T2-120V
T2-240V 208/240V 4.8 / 5.4 1.0 / 1.3 6-15P
T4-120V
T4-208/240V
T4-208V 208V 12.5 2.6 6-20P
CT4-120V
CT4-240V 208/240V 8.0 / 9.2 1.7/2.2 6-15P
BT4-120V
BT4-240V 208/240V 7.7 / 7.5 1.6/1.8 6-15P

Slices
per Hr

2 150

250 120V 18.3 2.2 5-20P

250/300

Elec

Supply Amp Kw Cord

120V 9.0 1.1 5-15P

208/240V 9.6 / 10.8 2.0/2.6 6-15P

4

150/150

250

120V 16.6 2 5-20P

120V 15.0 1.8 5-20P

Slot Unit

1-1/8”

1-1/8” / 1-5/8”

1-5/8”

Width

5-1/4”

11-7/16” 21lbs / 9.53 kg

“A”

6-5/8”

Depth

Height

“B”

“C”

13-3/8” 9-3/16”

Approx. Ship

WeightWidth Depth

12.3lbs / 5.58kg

3

CAUTION

GENERAL INFORMATION

This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.

INSPECTION
UN-CRATING AND INSPECTING

Unpack the unit and components from the shipping container. Remove all visible packing material

and those from inside the cooking chamber. If damage is discovered, le a claim immediately with

the carrier that handled the shipment. Do not operate the unit if it was damaged during shipping. All
shipping containers should be checked for freight damage both visible and concealed. This unit has
been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment
is received in damaged condition, either apparent or concealed, a claim must be made with the
delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.

ASSEMBLY AND INSTALLATION

The unit was shipped fully assembled and ready to plug into a standard outlet specied for its voltage
and amp draw. If improper electrical supply is determined, contact a qualied electrician prior to using

the unit. Removal and replacement of the power cord and plug will void the warranty. For assistance,
contact your local authorized service agent for service or required maintenance.

Before using the unit for the rst time, wipe down the exterior with a damp cloth.

Allow enough space around the toaster for adequate ventilation. Do not operate the unit without the
crumb tray properly positioned. Overheating and poor toasting may occur. Read all labels on the unit
and follow their instructions.

INSTALLATION

These models are equipped for the voltage and wattage indicated on the nameplate. The nameplate
is located on the back of the unit. These units are designed to operate on alternating current (A.C.),
two wire single phase service only and are equipped with an approved lead in cord set with a three
prong grounding type plug.

ELECTRICAL CONNECTION

Once the unit is in position, verirfy the electrical supply matches the units requirments, located on the
rear of the toaster.

WARNING

DO NOT CONNECT TO ANY OTHER TYPE OF VOLTAGE OR THE MACHINE WILL BE
SERIOUSLY DAMAGED.

DO NOT USE FOREIGN OBJECTS TO REMOVE THE TOAST. DOING SO MAY CAUSE
DAMAGE TO THE ELEMENTS OR POSSIBLE LOSS OF LIFE.

4