Star 9451-HP12CDN Operators Manual

HEATER PROOFERS

MODEL

9451-HP12, E9451-HP12
9451-HP34, E9451-HP34

Installation and

Operation

Instructions

2M-Z15782, Rev. B March 3, 2014

E9451-HP12CD

2

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

UsinganypartotherthangenuineToastmasterfactorysuppliedpartsrelievesthe
manufacturer of all liability.

Toastmaster reserves the right to change specications and product design

withoutnotice. Suchrevisionsdonotentitlethebuyertocorrespondingchanges,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the specications contained in this sheet are subject to change

without notice. While Toastmaster exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the

specications. By using the information provided, the user assumes all risks in

connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it
ready when you call to ensure a faster service.

SAFETY SYMBOLS

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone]
Fax: [phone]

E-mail [e-mail]

[e-mail]

[e-mail]

Website: www.star-mfg.com

The Service Help Desk

Authorized Service Agent Listing

Reference the listing provided with the unit
or
for an updated listing go to:

Website: www.toastmastercorp.com
E-mail [e-mail]
Telephone: [phone]

Mailing Address: Toastmaster

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

CAUTION

WARNING

2M-Z15782, Toastmaster Heater Proofer 9451-HP Series

2

Front

Top

Side

IL2431

Depth

Width

Height

9451 HP SERIES SERVICE SPECIFICATIONS

The Heater Proofer is an aluminum transport cabinet with heaters to function

as a hot food holding cabinet, and/or as a proong cabinet.

The heater, or heat drawer, is slid into place on the oor of the cabinet. An

electrical socket on the back of the drawer is provided to accept the supplied
power cord, which is plugged into the drawer through an access hole in the
back of the cabinet.

The main power switch on the front of the drawer, when switched “ON”, will
turn on the light in the switch and turn on the air circulating fan in the drawer.
The circulating fan will operate continuously while the unit is “ON”.

The thermostat control knobs are mounted to the left and right of the heat/proof
switch. The left thermostat knob controls the heat in the cabinet from 1 (low
heat: approximately 80°F) to 9 (high heat: approximately 185°F). The right
thermostat knob controls the humidity from 1 (approximately 20% relative

humidity) to 9 (in excess of 100% relative humidity). Average setting will be

approx. 6 (approximately 85% relative humidity).

2M-Z15782, Toastmaster Heater Proofer 9451-HP Series

Size Specications

Exterior Interior

Height Width Depth Height Width Depth
9451-HP12 30.3125” 22.8125” 33.3125” 15.625” 18.125” 27.5” 100lbs
9451-HP34 67.5625” 23.3125” 33.875” 51.75” 18.125” 27.5” 140lbs

Electrical Specications

Model Volts Watts Phase Hz NEMA
9451-HP12CC
9451-HP12CD
9451-HP12CDN
9451-HP12SDB
9451-HP34CD
9451-HP34CDN
9451-HP34SDN
9451-HWHSFR
E9451-HP12SD
E9451-HP34SD

120V 1.5 kW 1 50/60 Hz 5-20P

3

Weight

Shipping

This equipment is designed to hold food at a constant temperature, and supply humidity for proong

CAUTION

WARNING

when the application applies, this is NOT a cooking appliance. This unit is sold for commercial use only
by personnel trained and experienced in its operation and is not sold for consumer use in and around the
home nor for use directly by the general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels associated with the
unit prior to putting it into operation. Make sure all people associated with its use understand the units
operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed. This unit has

been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is
received in damaged condition, either apparent or concealed, a claim must be made with the delivering
carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make an
inspection and will supply necessary claim forms.

INSTALLATION

This unit is equipped for the voltage indicated on the nameplate mounted the side of the unit. They will

operate on alternating current (AC) only.

The electrical connection must be made in accordance with local codes or in the absence of local codes

with NFPA No.70 latest edition (in Canada use: CAS STD. C22.1). The electrical service is provided by a
cord and plug. Each appliance requires a 120 volt grounded supply. Supply wires must be 14 gauge or

larger to carry the load for one proofer.

DO NOT CONNECT TO DIRECT CURRENT (DC).

THIS APPLIANCE IS EQUIPPED WITH A 3-PRONG (GROUNDED) PLUG FOR YOUR
PROTECTION AGAINST SHOCK HAZARD AND MUST BE PLUGGED DIRECTLY INTO A
PROPERLY GROUNDED 3-PRONG RECEPTACLE.

GENERAL OPERATING PROCEDURES

Proong

Proong is one of the most important and delicate stages in baking. About 50% of the product volume
is created in the proofer. Proong accelerates the fermentation of yeast in a warm moist environment

causing the dough to rise. The proofer humidity should be between medium high and high. For optimum
results, rolls should be removed from the hot proofer and transferred to the cold proofer at minimum
proof. This will ensure that they can be held for 40 minutes without becoming over-proofed.

2M-Z15782, Toastmaster Heater Proofer 9451-HP Series

4