Star 50RGDKA Parts List
Star
ALIGN
IL1370
IL1371
Dividers
Long
Magnetic
Bracket
Divider
Mounting
Bracket
Short
Magnetic
Bracket
Align to
Center of Roller
IL1368
A5-Z10693 (50RGDKA)
A5-RG2051 (50RGDKA)
A5-RG2053 (50RGDKA)
2R-Z10692 (50RGDKA)
Manufacturing
International Inc.
10 Sunnen Dr.
St. Louis, MO 63143
Accessory
Instructions
Phone: (314) 781-2777
FAX: (314) 781-2714
2M-Z10892 Rev. A 7/9/2009
Roller Grill Merchandiser
Divider Installation
These instructions are to add merchandiser dividers & identiers to your (Stadium Seating) Star Roller
Grill. The unit does not need disassembling, but does need to have the power turned off and allowed
to cool. Once completed, the Dividers will keep your product separate, but not touch the rollers.
Tools Required: NONE
Contents:
• 2 Magnetic Brackets - Short
• 2 Magnetic Brackets - Long
• 2 Divider Mounting Brackets
• 2 or 4 Dividers depending on application
INSTALLATION:
UNPLUG UNIT BEFORE PROCEEDING.
CAUTION
Figure 1
1.
Remove the sneeze guard.
(A Series)
Figure 2
2.
Refer to Figure
roller, located at the lowest point on the roller grill.
3.
Install the Short Magnetic brackets at the opposite end of the roller grill.
4.
Position the Divider Mounting Brackets near the two
studs on the Magnetic Brackets, as shown in Fig. 2.
5.
Pull the Divider Mounting Bracket UP and rotate until
the slots are on the studs of the Magnetic brackets.
The Divider Mounting Brackets should not move.
6.
Insert the adjustable Dividers in one end of the
Divider Mounting Brackets.
7.
Move the opposite Divider Mounting Bracket away
from the Divider ends.
8.
Lower the divider ends and slide the Divider Mounting
bracket toward the Divider and insert the Divider into
the Divider Mounting Bracket.
1 and attach the Long Magnetic Brackets to the roller grill side, centered over the
Figure 3
1
Loading...