Star 30 SCBD, 30 CBDE, 30 CHD, 30 CHDE, 30 SCBDE Installation And Operation Instructions Manual

¸

¸

¸

®

ROLLER GRILLS

MODELS

30 CBD, CBDE, CHD, CHDE,

SCBD, SCBDE,SCHD, SCHDE

45 CBD, CHD, SCBD,

SCBDE, SCHD

50 CBD, CBDE,CHD,CHDE,

SCBD, SCBDE, SCHD, CHDE

75 CBD, CBDE, CHD,CHDE,

SCBD, SCBDE, SCHD, SCHDE, SCHDEP

Innite and Electronic Controls

Bun Drawer & Heated Bun Drawer

Installation and

Operation

Instructions

2M-Z9666 Rev. I 6/26/14

SAFETY SYMBOL

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specications and product design without

notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the specications contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions

reached as a result of using the specications. By using the information
provided, the user assumes all risks in connection with such use.

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when

you call to ensure a faster service.

Authorized Service Agent Listing

Model No.

Serial No.

Voltage

Purchase Date

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]

Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone]

Fax: [phone]

E-mail [e-mail]

[e-mail]

[e-mail]

Website: www.star-mfg.com

Mailing Address: Star International Holdings Inc., Company

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

2

TABLE OF CONTENTS

PAGE NUMBER
GENERAL SAFETY INFORMATION 3
GENERAL INSTALLATION INFORMATION 4
Connection Load 4
GENERAL OPERATING INSTRUCTIONS 5
Cleaning 6
ELECTRONICALLY CONTROLLED:
Start-up, Heating & Programing 7
WARRANTY 8
WIRING DIAGRAM 9 - 12
EXPLODED VIEW 14 - 15
PARTS LIST
30 MODEL SERIES 16 - 17
45 MODEL SERIES 18 - 19
50 MODEL SERIES 20 - 21
75 MODEL SERIES 22 - 23

CAUTION

GENERAL SAFETY INFORMATION

This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made with
the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.

3

GENERAL INSTALLATION INFORMATION

The grill should be connected to a wall type receptacle, a direct line or individual branch circuit. An
individual branch circuit is preferred. If connected to an overloaded circuit the grill will not operate
properly. The unit should be level when installed. Models equipped with bun boxes must be level to
utilize the self-closing feature of the bun drawer. Adjustable 4-inch legs are standard on the 75 series
and available for all other models.

This grill is equipped for the voltage shown on the nameplate. It will operate on alternating current

only, however, the specied voltage must be applied.

CONNECTION LOAD:

INFINITE CONTROL

MODEL SERIES WATTAGE

30CBD, 30SCBD 1150
30CHD, 30SCHD 1230

45CBD, 45SCBD 1650
45CHD, 45SCHD 1730
50CBD, 50SCBD 1535
50CHD, 50SCHD 1635
75CBD, 75SCBD 1730
75CHD, 75SCHD 1830

MODEL SERIES WATTAGE

30CBDE, 30SCBDE 1150
30CHDE, 30SCHDE 1230
45CHDEP 1650
50CBDE, 50SCBDE 1535
50CHDE, 50SCHDE 1635
75CBDE, 75SCBDE 1730
75CHDE, 75SCHDE 1830
75SCHDEP 1920/2560

ELECTRONIC CONTROL

WARNING

DO NOT CONNECT TO DIRECT CURRENT (DC).

IMPORTANT

UNLEVEL UNITS COULD RESULT IN HAVING PRODUCT TRAVEL FROM ONE
SIDE TO THE NEXT, OVER A PERIOD OF TIME.

4

GENERAL OPERATING INSTRUCTIONS

For specic information regarding ELECTRONIC GRILL OPERATION see page 7.

The main switch located on the control panel controls all the power to the unit. With the main switch
on, the rollers will turn, heat will be supplied to the bun box, but no heat will be supplied to the rollers
unless the heat controls are turned on. The switch is lighted to indicate when the unit is turned on.

For exibility the heating section of the grill is divided into two individually controlled heat sections.

The right control regulates the heat to the rear section and the left control regulates the heat to the
front section. On Innite control grills a signal light is provided above each heat control and
indicates when the heated section is on. An additional light is provided on the end housing of the unit
that indicates the position of the main power switch.

All units are equipped with an easily removed bun pan which can be removed by lifting out of the
open bun drawer. This makes daily cleaning of the pan easy.

It is necessary to remove the bun drawer before attempting to remove the drip tray when access to

the rear of the unit is obstructed. To remove the bun drawer, rst allow the unit to cool, remove bun

pan, then grab the drawer by both sides and pull it out all the way.
Lift the front to unhook the drawer slide from rear drawer roller. Pull the drawer the remainder of the
way out. Use caution not to drop the drawer when reaching the end of the drawer slide travel.

To reinsert the drawer, rst hook the drawer slide over the rst right side roller then push the drawer

in until the second roller drops in, doing one side at a time. Repeat for left side rollers. Reinsert bun
pan. Do not operate the grill without the drip tray in place.

COOKING

The heat controls provide an innite range of settings for a wide variety of food products and

installation conditions. The size, content and shape of the product and the installation of any sanitary
food shields or sneeze guards will determine the proper heat setting. The National Sanitation
Foundation requires that perishable foods be kept at 140°F or above during
serving periods. Do not keep the food product on a low setting for more than two hours. The product
should be kept refrigerated until ready for use. Cooking time will vary depending on the starting
temperature and the quality of the product. For best results when cooking hot dogs use a hot dog
made for grilling.

Operating the bun drawer requires lling the pan with fresh buns and removing the stale buns as

required. The heated bun drawer is not meant to toast the buns and the temperature is not adjustable.

NO WATER IS REQUIRED OR RECOMMENDED.

CAUTION

CAUTION

USE ONLY PLASTIC OR COATED UTENSILS FOR HANDLING THE FOOD PRODUCT.
METAL WILL SCRATCH THE ROLLER COATING AND AFFECT THE ABILITY TO
CLEAN THE ROLLERS.

INTERNAL DRAWER COMPONENTS & DRAWER CAVITY ARE HEATED. ALLOW THE
DRAWER & CAVITY TO COOL DOWN BEFORE SERVICING OR CLEANING. DO

NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON THE ROLLERS.
SCRAPES WILL VOID THE WARRANTY. USE CAUTION WHEN CLEANING
A HOT GRILL TO PREVENT BURNS OR BODILY INJURY.

5

CAUTION

CLEANING

Before cooking for the rst time, wash the rollers with mild soap and water using a soft cloth. Do

not use metal utensils when cooking. Scratches and scrapes will hamper the ability to easily clean

the rollers. Never use steel wool or abrasive cleaners on the rollers. This will damage the nish and

the roller bearings. The rollers clean most easily when hot. Use caution when cleaning to prevent
burns and bodily injury. Clean the rollers with a clean wet cloth. Wipe from the ends to the center to
prevent forcing debris into the roller seals. Do not allow the food product to build up and bake onto
the roller surface. The exterior of the unit should be cleaned using a mild detergent or non-abrasive
cleaner. Clean the entire unit daily to insure long life and satisfactory performance as well as to
maintain an attractive appearance. Do not clean with water jet equipment.

When cleaning the interior bun drawer compartment, remove the bun drawer (see General Operating
Instructions on page 5) and clean with mild detergent and warm water.

MAINTENANCE AND REPAIRS

Contact the factory, a service representative or a local service company for service or required
maintenance. Replacement cord sets must be purchased from Star Manufacturing International, Inc.

6





PAT. # 6,782,802 PAT. # 6,707,015

MADE IN

U.S.A.

PAT. # 6,393,971



Seal-Max

DURATEC



PAT. # 6,782,802 PAT. # 6,707,015

OPERATING PROCEDURES FOR ELECTRONIC GRILLS

START-UP

When initially turning on power to the electronically
controlled grill, it will be in the HOLD mode. The

display will ash until the set point temperature is

reached. The grill will beep once when it is up to
temperature. Innite controlled grills have no noti­cation when operating temperature is reached.

HEATING

The size, content, and shape of the product and the
installation of any sanitary food shields or sneeze
guards will determine the proper heat setting. The
National Sanitation Foundation requires that all
perishable foods be kept at 140°F or above during
serving periods.

The product should be kept refrigerated until ready
to use. Heating times vary depending on the starting
temperature and the qualities of the product. For
best results, use a hot dog made for grilling.

Before cooking for the rst time, wash the rollers

with mild soap and water using a soft cloth. When
the electronic controlled grills are initially turned on,

the displays will ash the HOLD temperature until

the grill reaches that set point.

With the grill preheated to the hold temperature,
load with the desired product and press the HEAT
button. The grill will then go into the heat mode and

the displays will ash until the HEAT temperature is

reached. After the heating cycle, the grill will beep
four times and the food product will be at the serving
temperature.

PROGRAM

The electronic controls provide programmable HEAT
and HOLD settings for a variety of food products and
installation conditions.

To program the electronic roller grill:

1. With the grill on, push and hold the up

and down

arrows at the same time, on the side you wish to
program for three seconds until the alarm beeps once
and the display blanks.

2. To set the heat temperature and/or heat time, push the

heat button. The last saved heat time will be displayed

and the HEAT LED will ash and HEAT TIME indicator will

be ON. Use the up

and down buttons to adjust
to the desired time, then press the HEAT button again.
The HEAT TIME LED indicator will turn off and the HEAT
TEMP LED indicator will now be on. When program­ming the HEAT temperature is complete, push the HEAT
button one more time to exit the programming mode.

3.To set the hol d temperature, repeat step 1 above then
push the HOLD button. The last saved hold temperature
will be displayed and HOLD LED will be ON. Use the

and buttons to adjust to the desired temperature,
then press the HOLD button again to exit programming
mode.

4.To turn the heat off to the front or rear section, press

and hold the

for that section for 3 seconds. "OFF"
will be displayed. To turn the section back on, press the
HEAT or HOLD button.

NOTE: Based on the product being heated, some

experimentation is required to nd the optimal HEAT

temperature and HEAT time to bring the product up
to temperature in an acceptable amount of time.

7

Visit our Website at: www.star-mfg.com Email: [e-mail]

This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which
the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation
company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.

All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited
to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair
of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken
to the closest Star service agency, transportation prepaid.

THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL

LIMITED EQUIPMENT WARRANTY

> Star will not assume any responsibility for loss of revenue.

> On all shipments outside the United States and Canada, see International Warranty.

* The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor.

* The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor.

* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.

* The warranty period for the Chrome-Max Griddles is ve (5) years on the griddle surface. See detailed warranty provided with unit.

* The warranty period for Teon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to

Teon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identiers and
point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the
“non-stick” properties of such materials.

> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts

and ninety (90) days on labor.

> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or

the Service Center's sub-agency.

> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and

Operating instructions.

> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.

Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted.

1. Travel time and mileage rendered beyond the 50 mile radius limit

2. Mileage and travel time on portable equipment (see below)

3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.

4. Installation of equipment

5. Damages due to improper installation

6. Damages from abuse or misuse

7. Operated contrary to the Operating and Installation Instructions

8. Cleaning of equipment

9. Seasoning of griddle plates

Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:

* The Model 510FD, 510FF Fryer.
* The Model 526TOA Toaster Oven.
* The Model J4R, 4 oz. Popcorn Machine.
* The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC &
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
* All Fast Steamer Models except Direct Connect Series.

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.

15MC & 18MCP Hot Food Merchandisers.

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

SERVICES NOT COVERED BY WARRANTY

PARTS WARRANTY

10. Voltage conversions

11. Gas conversions

12. Pilot light adjustment

13. Miscellaneous adjustments

14. Thermostat calibration and by-pass adjustment

15. Resetting of circuit breakers or safety controls or reset buttons

16. Replacement of bulbs

17. Replacement of fuses

18. Repair of damage created during transit, delivery, &

PORTABLE EQUIPMENT

FOR ASSISTANCE

installation OR created by acts of God

ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers

(Model 16PD-A Only)

* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens

(Model PO12 Only)

* Heat Lamps
* Pumps-Manual

2M-4497-2 6/1312

DESCRIPTION OF CHANGEDATELTR DR

1/04/05

1/13/2010

4

7

UPDATE WIRING OF WIRES 3 & 4,

REMOVE WIRE NUTS & CE PLUG

UPDATING PILOT LIGHTS AND

INFINITE CONTROLS

1

7

RFA

MCT

A

B

2

R

2

F

7

7

1

3

BUN BOX ELEMENT

7

3

A

4

A

75SCHB7-240/120V WIRE DIAGRAM

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

L2

H2 H2

H1

PILOT

B

L1

REAR FRONT

(AS VIEWED FROM REAR OF PANEL)

STAR MANUFACTURING INTERNATIONAL INC.

SK2095 Rev B 1/13/2011

B

2

R

B

2

F

7

7

L2

H1

PILOT

L1

B

1

1

3

4

7

7

PILOT
LIGHT

ALL MODELS EXCEPT

D

20, 20S, 30D, 30SD - 230V

MODEL:

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

RG SERIES, INFINITE CONTROLS

L2

H2 H2

H1

P2

E E

(AS VIEWED FROM REAR OF PANEL)

L1

REAR FRONT

STAR MANUFACTURING INTERNATIONAL INC.

SK1646 Rev E

L2

H1

P2

L1

1/13/2011

BUN BOX ELEMENT

11

NEUTRAL

LINE

FRONT GRILL

REAR GRILL

REAR

FRONT

1

2

6

3

7

4

F

R

9

F

R

BLACK

WHITE

120V AND 240V MODELS

230V MODELS

CONTROL BOARD

POWER BOARD

POWER
SWITCH

SENSOR

5

8

PILOT LIGHT

MOTOR

MODEL:

RGE SERIES,

ELECTRONIC CONTROLS

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

SK1913 Rev A

5/08/2006

12

10

SENSOR

MOTOR

NEUTRAL

LINE

CONTROL BOARD

REAR

FRONT

FRONT GRILL

REAR GRILL

7

BLACK

RIBBON

CABLE

4

3

6

POWER
SWITCH

1

2

R

F

9

F

R

POWER BOARD

5

8

120V AND 240V MODELS

PILOT LIGHT

WHITE

230V MODELS

MODEL:

RG SERIES, HEATED BUN BOX,

ELECTRONIC CONTROLS

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

SK2171 Rev A

5/08/2006

2M-Z9666;RG - Heated & Non-Heated Bun Box

5

4

6

3

7

12

11

10

STAR MANUFACTURING INTERNATIONAL INC.

SK2180 Rev. E 7/15/2013

62

2

8

13

61

9

14

60

40

MOUNT SPRING BETWEEN

FRAME & ARM HOLES

17

36

37

11

10

19

16

15

1

41

42

40

44

43

2M-Z9666;RG - Heated & Non-Heated Bun Box

5

56

57

35

38

37

36

23

30

39

31

32

22

27

26

NAMEPLATE

18

20

25

24

30

31

ELECTRONIC CONTROLS

33

33

34

INFINITE CONTROLS

REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION.

47

59

58

49

STAR MANUFACTURING INTERNATIONAL INC.

SK2181 9-15-11

51

50

48

47

45

46

55

53

2M-Z9666;RG - Heated & Non-Heated Bun Box

52

54

REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 30HD/BD Series

Fig No Part No Qty Description Application

1 A5-RG30106 1 BODY ASSY ALL
2 A5-Z2185 1 DRIP TRAY ALL
3 A5-Z8409 1 BACK-CHAIN RETAINER SPACER ALL
4 A5-Z8410 1 ANGLE CHAIN RETAINER UPPER ALL
5 A5-Z2169 2 SIDE PANEL ALL

2N-Z2178

6

2N-Z2194 ELEMENT 230V 30/45 230V
7 A5-Z6719 1 CHAIN GUIDE ALL
8 2P-Z2242 1 CHAIN ALL

PS-RG3077
9

PS-RG3078 ROLLER ASSY POLY (HI-GRIP) ALL

10 2P-Z8392 3 IDLER SPROCKET ALL
11 2A-Z8017 3 BUSHING, IDLER ALL
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER ALL
13 2P-Z8074 1 EXTENSION SPRING ALL

2P-Z8317

14

2P-Z11853 ALL 1/2” MOTOR SHAFTS

PS-RG5069

15

PS-RG5070

16 A5-RG2046 1 MOTOR MOUNTING ASSY ALL

2E-Z0512

17

A5-RG2036 CORD ASSY 120V 120V

A5-RG50111 CORDSET AY, CEE 7-7 30SCHD-230V, 30SCHDE-230/5, 30SCHDCF-230V

18 2K-Y3240 1 CORD BUSHING ALL

2E-Y9227

19

2K-8043 BUSHING HEYCO SB-875-10 120V

20 A5-Z5335 1 BOTTOM COVER PLATE ALL
21 2P-Z1540 2 HOLE PLUG, 5/16” DIA. ALL
22 A5-Z9344 1 MOUNTING BRACKET ALL

PS-RG5095

23

PS-RG5094

24 2K-Z1971 9 SPACERS 30CBDE/CHDE/SCBDE/SCHDE

2E-Z13638

25

A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 230/240V

PS-RG5087 KIT 2E-Z5565 REPLACEMENT, 120V/240V 30CBDE/CHDE/SCBDE/SCHDE, manf before 11/2010

2J-Z15323

26

PS-RG5093 KIT SERVICE, FRONT PROBE REPL 30CBDE/CHDE/SCBDE/SCHDE, manf before 11/2010

27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 30CBDE/CHDE/SCBDE/SCHDE

A5-Z9519

30

A5-Z9523 30CBDE/CHDE/SCBDE/SCHDE

2M-Z9625

2M-Z9666;RG - Heated & Non-Heated Bun Box

2M-Z9626 30SCBD/SCHD

31

2M-Z9627 30CBDE/CHDE

2M-Z9628 30CBD/CHD

ELEMENT 120V 30/45 120V

11

ROLLER ASSY CHROME ALL

11

1 MOTOR SPROCKET

KIT MOTOR 120V, w/SPROCKET 120V

1

KIT MOTOR 240V 30/45
(motor, sproket, mount)

CORD SET EUR 10AMP 230V

1

CORD INLET IEC320 10 AMP 230V

1

INFINITE CONTROL 240V

2

INFINITE CONTROL 120V

ELECTRONIC CONTROL, RG 120V 30CBDE/CHDE/SCBDE/SCHDE, manf after 11/2010

1

THERMISTOR, FRONT, .250 DIA. 30CBDE/CHDE/SCBDE/SCHDE, manf after 11/2010

1

1 CONTROL PANEL

1 CONTROL PANEL LABEL

ALL 3/8” MOTOR SHAFTS

230/240V

230V / 240V
120V

30CBD/SCBD/CHD/SCHD

30SCBDE/SCHDE

Star Manufacturing International, Inc.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 30HD/BD Series

Fig No Part No Qty Description Application

2J-Z2329

32

2J-Z3157 3 PILOT LIGHT YELLOW 30CBD 230V, 30CHDE-230/5, 30CHDCF-230V
2E-Z1858

33

2E-Z3156 SWITCH-YELLOW LIGHTED 30CBD 230V, 30CHDE-230/5
34 2R-Z1854 2 KNOB W/SET SCREW 30CBD/SCBD/CHD/SCHD
35 A5-Z2509 4 PANEL-INSULATOR ALL

2P-Z6455 22 TUBE SEAL, SOLID, WHITE ALL
36

2I-Z13660 10 INNER SEAL-LIGHT GRAY, BACK

2I-Z13659 12 INNER SEAL-BLACK, FRONT
37 2I-Z2175 22 ORING SEAL ALL
38 2P-Z2174 22 TUBE GUIDE ALL
39 2R-Z5846 4 FOOT-ROLLER GRILLS ALL

40 2K-Z2895

41 A5-Z7650 1 ELEMENT RETAINER - UPPER ALL

A5-RG30139
42

A5-Z7656 ELEMENT RETAINER - LOWER 30CBD/SCBD/CHD/SCHD

2N-Z15188
43

2N-Z2181 ELEMENT BUN BOX 30CHD/CHDE/SCHD/SCHDE
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 30CHD/CHDE/SCHD/SCHDE
45 2P-Y9176 2 SNAP-BUTTON ALL
46 A5-RG30110 1 CONTROL PANEL DOOR ASSY ALL
47 2P-Z0315 12 DRAWER ROLLER, BEARING ALL
48 A5-RG30109 1 BUN DRAWER FRAME ASSY ALL
49 2R-Z9393 1 SET 14” DRAWER SLIDES ALL
50 2D-Z5898 1 PAN 2/3 X 4” DEEP ALL
51 A5-Z9538 1 PAN COVER, BUN BOX 30CHD/CHDE/SCHD/SCHDE
52 2P-Z0584 1 TONGS ALL
53 A5-RG30105 1 BUN DRAWER DOOR ASSY ALL

2M-Z9397
54

2M-Z16825 GRAPHIC, RG30 BUN BOX 30SCHDCF-230V

2M-Z9398
55

2M-Z16826 GRAPHIC, RG30 CON, COVER 30SCHDCF-230V
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 30CHDE/SCHDE/CBDE/SCBDE/CHDE/SCHDE
57 A5-Z13072 1 HD ELEMENT GUARD 30CHDE/SCHDE/CBDE/SCBDE/CHDE/SCHDE
60 2P-Z12340 AR SEAL RETAINER
61 2C-Z12341 AR SNAP RING
62 2A-Z12339 AR BRASS BUSHING
NI 2E-Z8118 1 WIRE SET 30CHD/SCHD
NI 2E-Z8320 1 WIRE SET 30CBD/SCBD
NI 2E-Z8414 1 WIRE SET 30CBDE/SCBDE
NI 2E-Z9386 1 WIRE SET 30CHDE/SCHDE
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE

2M-Z16827

2M-Z16828 GRAPHIC, RG30, SIDE

NI

2M-Z16829 GRAPHIC, RG30, SIDE, SN

3

PILOT LIGHT RED

1 30CBDE, 30CHDE

SWITCH-RED LIGHTED ALL

1

2

ANTI SHORT BUSHING

3 30CHDE-230/5

ELEMENT RETAINER ASSY - LOWER 30CHDE/SCHDE/CBDE/SCBDE/CHDE/SCHDE

1

ELEMENT, 80 WATT 230V 30CHDE-230/5

1

LABEL, DRAWER ALL

1

LABEL, CONTROL PANEL DOOR ALL

1

GRAPHIC, RG30, REAR

1

30CBD/SCBD/CHD/SCHD

ALL

Certain Models
Certain Models
Certain Models

30SCHDCF-230V

2M-Z9666;RG - Heated & Non-Heated Bun Box

Star Manufacturing International, Inc.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 45HD/BD Series

Fig No Part No Qty Description Application

1 A5-RG4562 1 BODY ASSY ALL
2 A5-Z2186 1 DRIP TRAY ALL
3 A5-Z8411 1 BACK-CHAIN RETAINER SPACER ALL
4 A5-Z8412 1 ANGLE CHAIN RETAINER UPPER ALL
5 A5-Z2265 2 SIDE PANEL ALL

2N-Z2178

6

2N-Z2194 ELEMENT 230V 30/45 230V
7 A5-Z6615 1 CHAIN GUIDE - LOWER ALL
8 2P-Z2266 1 CHAIN ALL

PS-RG3077
9

PS-RG3078 ROLLER ASSY POLY (HI-GRIP) ALL

10 2P-Z8392 3 IDLER SPROCKET ASSEMBLY ALL
11 2A-Z8017 3 BUSHING, IDLER ALL
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER ALL
13 2P-Z8074 1 EXTENSION SPRING ALL

2P-Z8317

14

2P-Z11853 ALL 1/2” MOTOR SHAFTS

15 PS-RG5069 1 GEAR MOTOR 120V, w/SPROCKET ALL
16 A5-RG2063 1 MOTOR MOUNTING ASSY ALL

2E-Z0512

17

A5-RG2036 CORD ASSY 120V ALL

A5-RG2041 CORD SET ASSY 120V CSA 120VC

2K-Y2968 1 BUSHING - HEYCO 7W-2 120VC

18

2K-Y3240 1 CORD BUSHING ALL

19 2K-8043 1 BUSHING HEYCO SB-875-10 ALL
20 A5-Z5335 1 BOTTOM COVER PLATE ALL
22 A5-Z9344 1 MOUNTING BRACKET ALL

PS-RG5095

23

PS-RG5094 INFINITE CONTROL 120 VOLT ALL MANUAL

PS-RG5087 1 KIT, CONTROL, PBOARD, PROBES 45SCHDE

24 2K-Z1971 9 SPACERS 45SCHDE

2E-Z13638

25

A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 230/240V

PS-RG5087 KIT 2E-Z5565 REPLACEMENT, 120/240V 45SCHDE, manufactured before 11/2010

26 2J-Z15323 1 THERMISTOR, FRONT, .250 DIA. 45SCHDE, manufactured after 11/2010
26 PS-RG5093 1 KIT SERVICE, FRONT PROBE REPL 45SCHDE, manufactured before 11/2010
27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 45SCHDE
30 A5-Z9519 1 CONTROL PANEL ALL

2M-Z9628 1 LABEL, CONTROL PANEL INFINITE HD / BD

31

2M-Z9625 LABEL, CONTROL PANEL, ELECTRONIC HDE

2J-Z2329

32

2J-Z3157 PILOT LIGHT YELLOW 230V

2M-Z9666;RG - Heated & Non-Heated Bun Box

2E-Z1858

33

2E-Z3156 SWITCH-YELLOW LIGHTED 230V

34 2R-Z1854 2 KNOB W/SET SCREW ALL
35 A5-Z2510 4 PANEL-INSULATOR ALL

ELEMENT 120V 30/45 ALL

16

ROLLER ASSY CHROME ALL

16

1 MOTOR SPROCKET

CORD SET EUR 10AMP 230V

1

INFINITE CONTROL 240V 230V MANUAL

2

ELECTRONIC CONTROL, RG 120V 45SCHDE, manufactured after 11/2010

1

PILOT LIGHT RED ALL

3

SWITCH-RED LIGHTED ALL

1

ALL 3/8” MOTOR SHAFTS

Star Manufacturing International, Inc.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 45HD/BD Series

Fig No Part No Qty Description Application

2P-Z6455 32 TUBE SEAL, SOLID, WHITE ALL

36

2I-Z13660 16 INNER SEAL-LIGHT GRAY, BACK

2I-Z13659 16 INNER SEAL-BLACK, FRONT
37 2I-Z2175 32 ORING SEAL ALL
38 2P-Z2174 32 TUBE GUIDE ALL
39 2R-Z5846 4 FOOT-ROLLER GRILLS ALL

40 2K-Z2895

41 A5-Z6619 1 ELEMENT RETAINER - UPPER ALL
42 A5-Z6622 1 ELEMENT RETAINER - LOWER ALL
43 2N-Z2181 1 ELEMENT BUN BOX 120V 45CH/SCH
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 45CH
45 2P-Y9176 2 SNAP-BUTTON ALL
46 A5-RG30110 1 CONTROL PANEL DOOR ASSY ALL
47 2P-Z0315 12 DRAWER ROLLER W/SCREW ALL
48 A5-RG30109 1 BUN DRAWER FRAME ASSY ALL
49 2R-Z9393 1 SET 14” DRAWER SLIDES ALL
50 2D-Z5898 1 PAN 2/3 X 4” DEEP ALL
51 A5-Z9538 1 PAN COVER, BUN BOX 45CH/SCH
52 2P-Z0584 1 TONGS ALL
53 A5-RG30105 1 BUN DRAWER DOOR ASSY ALL

2M-Z9397
54

customer

provided

2M-Z9398
55

customer

provided
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 45CH/SCH
57 A5-Z11753 1 HD ELEMENT GUARD 30/45 45CH/SCH
58 2V-Z13052 1 TONG HOLDER CERTAIN MODELS
59 2C-1512 2 SCREW 10X24X3/8 RHP STL CERTAIN MODELS
60

PS-RG30149 KIT KIT -RG HSG RPR/NO ROLLER

61
62
NI 2E-Z8118 1 WIRE SET 45CHD/SCHD
NI 2E-Z8320 1 WIRE SET 45CBD/SCBD
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE ALL

2 ANTI SHORT BUSHING ALL
3 ANTI SHORT BUSHING 230V

LABEL, DRAWER ALL

1

LABEL, DRAWER 45SCBDEP, 45SCBDE4P

LABEL, CONTROL PANEL DOOR ALL

1

LABEL, CONTROL PANEL DOOR 45SCBDEP, 45SCBDE4P

HOLE REPAIR KIT, 45CBDE4P120,
45SCBDEP-120

Star Manufacturing International, Inc.

2M-Z9666;RG - Heated & Non-Heated Bun Box

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 50HD/BD Series

Fig No Part No Qty Description Application

1 A5-RG5053 1 BODY ASSY
2 A5-Z2305 1 DRIP TRAY
3 A5-Z8409 1 BACK-CHAIN RETAINER SPACER
4 A5-Z8410 1 ANGLE CHAIN RETAINER UPPER
5 A5-Z2169 2 SIDE PANEL

2N-Z2179

6

2N-Z2193 ELEMENT 230V 230V, 230/5
7 A5-Z6719 1 CHAIN GUIDE
8 2P-Z2242 1 CHAIN

PS-RG7562

PS-RG7563 ROLLER ASSY POLY (HI-GRIP) MFG BEFORE 08/07 ONLY
9

A5-RG5057 ROLLER ASY HIGRIP (HI-GRIP PLUS)

PS-RG7598 ROLLER ASSY POLY (SMOOTH) 50SCBDESW

10 2P-Z8392 3 IDLER SPROCKET ASSEMBLY
11 2A-Z8017 3 BUSHING, IDLER
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER
13 2P-Z8074 1 SPRING

2P-Z8317

14

2P-Z11853 ALL 1/2” MOTOR SHAFTS

PS-RG5069

15

PS-RG5070 GEAR MOTOR w/SPROCKET 230V

A5-Z14583 MOTOR, 240V, 50 HZ 50SCBD-230/5

16 A5-RG2046 1 MOTOR MOUNTING ASSY

2E-Z0512

17

A5-RG2036 CORD ASSY 120V 50CBDE/CHDE/SCHDE/SCBDE-120V

A5-RG2041 CORD SET ASSY 120V 50CBD/SCBD/CHD/SCHD/SCBDE-CSA

2E-Y9227

18

2K-Y3240 CORD BUSHING

2K-Y2968 BUSHING - HEYCO 7W-2 SCBDE-CSA

19 2K-8043 1 BUSHING HEYCO SB-875-10
20 A5-Z5335 1 BOTTOM COVER PLATE
22 A5-Z9344 1 MOUNTING BRACKET

PS-RG5095

23

PS-RG5094 INFINITE CONTROL 120V 50CHD/CBD/SCHD/SCBD

PS-RG5087 1 ELECTRONIC CONTROL 120V 50CBDE/CHDE/SCBDE/SCHDE

24 2K-Z1971 9 SPACERS 50CBDE/CHDE/SCBDE/SCHDE

PS-RG5087

25

2E-Z13638 ELECTRONIC CONTROL, RG 120V 50CBDE/CHDE/SCBDE/SCHDE manuf.after 11/2010

A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 230/240V

PS-RG5093

26

2J-Z15323 THERMISTOR, FRONT, .250 DIA. 50CBDE/CHDE/SCBDE/SCHDE manuf.after 11/2010

27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 50CBDE/CHDE/SCBDE/SCHDE

2M-Z9666;RG - Heated & Non-Heated Bun Box

A5-Z9392

30

A5-RG5052 CONTROL PANEL ASSY 50/75 E/C 50CBDE/CHDE/SCBDE/SCHDE

2M-Z9613

2M-Z9614 CONTROL PANEL LABEL 50CBDE/CHDE

31

2M-Z9615 CONTROL PANEL LABEL 50SCHD/SCBD

2M-Z9616 CONTROL PANEL LABEL 50CHD/CBD

ELEMENT 120V 50

11

ROLLER ASSY CHROME

11

1 MOTOR SPROCKET

GEAR MOTOR w/SPROCKET

1

CORD SET , CONT. EUR 10A 230V

1

INLET IEC320 10 AMP 230V, 230/5

1

INFINITE CONTROL 240V 230V / 240V

2

KIT 2E-Z5565 REPLACEMENT, 120/240V 50CBDE/CHDE/SCBDE/SCHDE manuf. before 11/2010

1

KIT SERVICE, FRONT PROBE REPL 50CBDE/CHDE/SCBDE/SCHDE manuf.before 11/2010

1

CONTROL PANEL 50CHD/CBD/SCHD/SCBD

1

CONTROL PANEL LABEL 50SCBDE/SCHDE

1

ALL 3/8” MOTOR SHAFTS

Star Manufacturing International, Inc.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 50HD/BD Series

Fig No Part No Qty Description Application

2J-Z2329

32

2J-Z3157 3 PILOT LIGHT 250V AMBER 230V, 230/5
2E-Z1858 1 SWITCH-RED LIGHTED

33

2E-Z3156 1 SW DPST 20A/125V ORG LGHT 230V, 230/5
34 2R-Z1854 2 KNOB W/SET SCREW 50CHD/CBD/SCHD/SCBD
35 A5-Z2509 4 PANEL-INSULATOR

2P-Z6455 22 TUBE SEAL, SOLID, WHITE ALL
36

2I-Z13660 10 INNER SEAL-LIGHT GRAY, BACK

2I-Z13659 12 INNER SEAL-BLACK, FRONT

37 2I-Z2175 22 ORING SEAL
38 2P-Z2174 22 TUBE GUIDE
39 2R-Z5846 4 LEGS

40 2K-Z2895

41 A5-Z7650 1 ELEMENT RETAINER - UPPER

A5-RG30139
42

A5-Z7656 ELEMENT RETAINER - LOWER 50CHD/CBD/SCHD/SCBD

2N-Z2178
43

2N-Z2194 ELEMENT, BUN BOX 230V 230V
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 50CHD/CHDE/SCHD/SCHDE

45 2P-Y9176

46 A5-RG5047 1 CONTROL PANEL DOOR ASSY
47 2P-Z0315 12 DRAWER ROLLER W/SCREW
48 A5-RG5048 1 BUN DRAWER FRAME ASSY
49 2R-Z9393 1 SET 14” DRAWER SLIDES
50 2D-Z5899 1 PAN FULL X 4” DEEP
51 A5-Z9539 1 HD PAN COVER 50CHD/CBD/SCHD/SCBD

52 2P-Z0584

53 A5-RG5046 1 BUN DRAWER DOOR ASSY

2M-Z9395 1 LABEL, DRAWER
54

customer provided 1 LABEL, DRAWER 50SCBDEP, 50SCBDE4P

2M-Z9396 1 LABEL, CONTROL PANEL DOOR
55

customer provided 1 LABEL, CONTROL PANEL DOOR 50SCBDEP, 50SCBDE4P
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 50CHD/CHDE/SCHD/SCHDE
57 A5-Z13072 1 HD ELEMENT GUARD 30/45 50CHD/CHDE/SCHD/SCHDE
58 2V-Z13052 1 TONG HOLDER CERTAIN MODELS
59 2C-1512 2 SCREW 10X24X3/8 RHP STL CERTAIN MODELS
60 2P-Z12340 1 SEAL RETAINER 50SCBD-120V
61 2C-Z12341 1 SNAP RING 1.25 EXTERNAL 50SCBD-120V
62 2A-Z12339 1 BUSHING RG REPAIR 50SCBD-120V

NI 2E-Z8118 1 WIRE SET 50CHD/SCHD
NI 2E-Z8320 1 WIRE SET 50CBD/SCBD
NI 2E-Z8414 1 WIRE SET 50CBDE/SCBDE
NI 2E-Z9386 1 WIRE SET 50CHDE/SCHDE
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE

1 PILOT LIGHT RED 50CBDE/CHDE/SCBDE/SCHDE
3 PILOT LIGHT RED 50CHD/CBD/SCHD/SCBD

2

ANTI SHORT BUSHING

3 230V, 230/5

ELEMENT RET + THERM MOUNT 50CBDE/CHDE

1

ELEMENT, BUN BOX 120V 50CHD/CHDE/SCHD/SCHDE

1

2

SNAP BUTTONS

4 50SCBDESW120

1

TONGS

3 50SCBDESW120

2M-Z9666;RG - Heated & Non-Heated Bun Box

Star Manufacturing International, Inc.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 75HD/BD Series

Fig No Part No Qty Description Application

1 A5-RG7580 1 BODY ASSY
2 A5-Z2306 1 DRIP TRAY
3 A5-Z8411 1 BACK-CHAIN RETAINER SPACER
4 A5-Z8412 1 ANGLE CHAIN RETAINER UPPER
5 A5-Z2265 2 SIDE PANEL

2N-Z2193

6

2N-Z2982 ELEMENT 120V 105 W 120V
7 A5-Z6615 1 CHAIN GUIDE
8 2P-Z2266 1 CHAIN

PS-RG7562

PS-RG7563 ROLLER ASSY POLY (HI-GRIP) MFG BEFORE 08/07 ONLY
9

A5-RG5057 ROLLER ASSY POLY (HI-GRIP PLUS)

PS-RG7598 ROLLER ASSY POLY (SMOOTH) 75SCBDESW

10 2P-Z8392 3 IDLER SPROCKET

11 2A-Z8017 3 BUSHING, IDLER
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER
13 2P-Z8074 1 EXTENSION SPRING

2P-Z8317

14

2P-Z11853 ALL 1/2” MOTOR SHAFTS
PS-RG5070

15

PS-RG5069 GEAR MOTOR w/SPROCKET 120V
A5-Z14583 MOTOR, 240V, 50 HZ 75SCBDE-CE50

16 A5-RG2046 1 MOTOR MOUNTING ASSY

A5-RG2034

17

A5-RG2041 CORD ASSY 120V 120V

2E-Y9251 CORD SET CONT EEUR 16AMP 75SCBDE-CE50
18 2K-Y3240 1 CORD BUSHING
19 2K-8043 1 BUSHING HEYCO SB-875-10
20 A5-Z5335 1 BOTTOM COVER PLATE
22 A5-Z9344 1 MOUNTING BRACKET

PS-RG5095
23

PS-RG5094
24 2K-Z1971 9 SPACERS 75CBDE/CHDE/SCBDE/SCHDE

PS-RG5087
25

2E-Z13638 ELECTRONIC CONTROL, RG 120V 75CBDE/CHDE/SCBDE/SCHDE manufactured after 11/2010

A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 75CBDE/CHDE/SCBDE/SCHDE manufactured after 11/2010

PS-RG5093
26

2J-Z15323 THERMISTOR, FRONT, .250 DIA. 75CBDE/CHDE/SCBDE/SCHDE manufactured after 11/2010
27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 75CBDE/CHDE/SCBDE/SCHDE

A5-RG5052
30

A5-Z9392 75CBD/CHD/SCBD/SCHD

2M-Z9616 1 CONTROL PANEL LABEL 75CHD/CBD

2M-Z9666;RG - Heated & Non-Heated Bun Box

2M-Z9615 1 CONTROL PANEL LABEL 75SCHD/SCBD
31

2M-Z9614 1 CONTROL PANEL LABEL 75CBDE-120V/CHDE

2M-Z9613 1 CONTROL PANEL LABEL 75CBDE-240V/SCBDE/SCHDE

2J-Z2329 1 PILOT LIGHT RED 75CBDE/CHDE/SCBDE/SCHDE
32

2J-Z2329 3 PILOT LIGHT RED 75CBD/CHD/SCBD/SCHD

2J-Z3157 1 PILOT LT 250V AMBER NEON 75SCBDE-CE50

ELEMENT 230V 50/75 240V, CE50

16

ROLLER ASSY CHROME

16

1 MOTOR SPROCKET

GEAR MOTOR w/SPROCKET 240V

1

CORD SER 240V W/TERMINALS 240V

1

INFINITE CONTROL 240V

2

INFINITE CONTROL 120V

KIT 2E-Z5565 REPLACEMENT, 120/240V 75CBDE/CHDE/SCBDE/SCHDE, manufacture before 11/2010

1

KIT SERVICE, FRONT PROBE REPL 75CBDE/CHDE/SCBDE/SCHDE, manufacture before 11/2010

1

1 CONTROL PANEL

ALL 3/8” MOTOR SHAFTS

230V / 240V
120V

75CBDE/CHDE/SCBDE/SCHDE

Star Manufacturing International, Inc.

PARTS LIST June 27, 2014, Rev. i

Grill-Max Roller Grills 75HD/BD Series

Fig No Part No Qty Description Application

2E-Z1858

33

2E-Z3156 SW DPST 20A/125V ORG LIGHT 75SCBDE-CE50
34 2R-Z1854 2 KNOB W/SET SCREW 75CBD/CHD/SCBD/SCHD
35 A5-Z2510 4 PANEL-INSULATOR

2P-Z6455 32 TUBE SEAL, SOLID, WHITE ALL

2I-Z13660 16 INNER SEAL-LIGHT GRAY, BACK

36

2I-Z13659 16 INNER SEAL-BLACK, FRONT

37 2I-Z2175 32 ORING SEAL
38 2P-Z2174 32 TUBE GUIDE
39 2R-Y5092 4 LEGS 4”, BLACK PLASTIC

40 2K-Z2895

41 A5-Z6619 1 ELEMENT RETAINER - UPPER

A5-RG4582
42

A5-Z6622 ELEMENT RETAINER - LOWER 75CBD/CHD/SCBD/SCHD
43 2N-Z2178 1 ELEMENT, BUN BOX 120V 75CHD/CHDE/SCHD/SCHDE
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 75CHD/CHDE/SCHD/SCHDE
45 2P-Y9176 2 SNAP BUTTON
46 A5-RG5047 1 CONTROL PANEL DOOR ASSY
47 2P-Z0315 12 DRAWER ROLLER W/SCREW
48 A5-RG5048 1 BUN DRAWER FRAME ASSY
49 2R-Z9393 1 SET 14” DRAWER SLIDE
50 2D-Z5899 1 PAN FULL X 4” DEEP
51 A5-Z9539 1 HD PAN COVER 50/75 75CHD/CHDE/SCHD/SCHDE

52 2P-Z0584

53 A5-RG5046 1 BUN DRAWER DOOR ASSY
54 2M-Z9395 1 LABEL, DRAWEE
55 2M-Z9396 1 LABEL, CONTROL PANEL DOOR
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 75CHD/CHDE/SCHD/SCHDE
57 A5-Z13072 1 HD ELEMENT GUARD 30/45 75CHD/CHDE/SCHD/SCHDE
60 2P-Z12340 1 SEAL RETAINER 75SCBD-240V
61 2C-Z12341 1 SNAP RING 1.25 EXTERNAL 75SCBD-240V
62 2A-Z12339 1 BUSHING RG REPAIR 75SCBD-240V
NI 2E-Z8414 1 WIRE SET 75CBDE/SCBDE
NI 2E-Z9386 1 WIRE SET 75CHDE/SCHDE
NI 2E-Z8320 1 WIRE SET 75CBD/SCBD
NI 2E-Z8118 1 WIRE SET 75CHD/SCHD
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE
NI 2E-Y9253 1 INLET IEC 320 16 AMP 75SCBDE-CE50

SWITCH-RED LIGHTED

1

2

ANTI SHORT BUSHING

3 240V, 75SCBDE-CE50

ELEMENT RET + THERM MOUNTS 75CBDE/CHDE/SCBDE/SCHDE

1

1

TONGS

3 75SCBDESW120

Star Manufacturing International, Inc.

2M-Z9666;RG - Heated & Non-Heated Bun Box

2M-Z9666;RG - Heated & Non-Heated Bun Box

STAR INTERNATIONAL HOLDINGS INC. COMPANY

Star - Holman - Lang - Wells - Bloomeld - Toastmaster

10 Sunnen Drive, St. Louis, MO 63143 U.S.A.

[phone]

www.star-mfg.com