Star
A5-Z6636 = 31-29/32" x 4-13/32"
2R-Z6625 = 26-1/16" x 1/2"
A5-Z6626 = 19-29/32" x 4-13/32"
2R-Z7296 = 18-1/2" x 1/2"
Manufacturing
International Inc.
10 Sunnen Dr.
St. Louis, MO 63143
Accessory
Instructions
Phone: (314) 781-2777
FAX: (314) 781-2714
2M-Z6634 Rev. B 5/10/2006
Roller Grill Merchandiser
Divider Installation
These instructions are to add merchandiser dividers & identifi ers to your forward or reverse slanted
(Stadium Seating) Star Roller Grill. The unit does not need disassembling, but does need to have the
power turned off and allowed to cool. Once completed, the Dividers should keep your product separate,
but not be allowed to actually touch the rollers.
Tools Required: NONE
Contents:
• 2 Short Magnetic Brackets - Short
• 2 Long Magnetic Brackets - Long
• 2 Divider Mounting Brackets
• 2 or 4 Dividers depending on application
• 6 or 10 Point Of Sale (POS) Magnets
INSTALLATION:
Divider
Mounting
Brackets
Dividers
P.O.S.
Magnets
CAUTION
UNPLUG UNIT BEFORE PROCEEDING.
1. If necessary, remove the sneeze guard.
STADIUM SEATING, is when the rollers drop from
one end of the grill to the other making each set
of rollers lower than the next. On some models
the highest roller is on the control side.
2. Referring to the illustration, attach
the Long Magnetic Brackets to the roller
grill in the two interior corners where the
rollers are the lowest.
3. Line up the two slots on the Divider Mounting
Brackets to the two studs on each of the Long
Magnetic Brackets.
4. Repeat the installation for the opposite side where
the rollers are the highest.
5. Insert the adjustable Dividers in an
appropriate slot on the Divider Mounting Brackets,
giving you enough room for your product.
6. Attach your Merchandising Label (not
provided) to the P.O.S. Magnets and
place them onto the front and rear Divider
Mounting Brackets.
Long
Magnetic
Brackets
Short
Magnetic
Brackets
7. Reinstall any sneeze guard you may have
removed, and turn unit back on.
Control Side may
1
vary depending on model
),