Stanton DJC.4, Virtual DJ LE 7 Quick Start Manual

DJC.4 :: QUICK START GUIDE (Virtual DJ LE 7)

FOR MORE INFORMATION ON THE ADVANCED FUNCTIONALITY OF SOME OF THE LABELED BUTTONS (SMART SCRATCH, ETC), PLEASE CONSULT THE VIRTUAL DJ MANUAL

DECK TRANSPORT CONTROL

SAMPLER VOLUME

FADER FX

÷ x

LOOP LENGTH

÷ x

LOOP LENGTH

ON ON

BEAT LOCK

SMART

SMART FADE

FADER FX

FX CTRL 1

BEAT LOCK

SMART

FX CTRL 2

REVERSE

REVERSE

A/C B/D

SAMPLERSAMPLER

0% 0%

PITCH/TEMPO

CHANNEL EQ CONTROL

(Labeled Shift Function for Key/Filter)

QUICK LOOP

ACCESS

JOG WHEEL

(PITCH/SCRATCH)

LOOP CONTROL

HOT CUE CONTROL

SAMPLER PLAYBACK

CROSSFADER

TRACK VOLUME

(FX Parameter When Fader FX Mode Is Engaged)

SHIFT BUTTON

(Engages Secondary Labeled
Function On Many Controls )

CHANNEL CUE CONTROL

DECK SELECT

CHANNEL FX CONTROL

(FADER FX Control Changes Line Faders to FX Controls)

VIDEO

ON

Welcome to the DJC.4 Virtual DJ Controller

Thank you for purchasing the Stanton DJC.4 advanced Virtual DJ Controller. With DJC.4, you have access to all the controls of a
traditional two turntable and mixer system, as well as advanced mix functionality not found on any other controller on the market.

With DJC.4, you can mix up to four tracks at once, access loops, hot cues and a sampler with direct access to up to 3 FX at once,
and even control your FX with our exclusive Fader FX mode, which allows you to control FX parameters with your line faders for
even more creative mix options.

Setup of the DJC.4 is simple. Use the included USB cable to connect your DJC.4 to your computer, install Virtual DJ LE (and the
included ASIO drivers if you are a Windows™ user), start up Virtual DJ LE and go.

Connect the USB type “B” connector to the DJC.4 USB “B” socket and the other end of the USB cable to your computer’s USB port.
While the DJC.4 can run very comfortably with USB bus power, in cases where your computer may not have enough power, it may be
necessary to connect an additional power supply.
The DJC.4 can be used to connect additional DJ equipment, allowing it to be the centerpiece of your digital DJ setup. You can even
connect turntables and CD players and use the analog inputs to control Virtual DJ 7 Pro with real vinyl (upgrade required). Please
see the diagram below:

1. Unpacking

Carton Contents:

(1) DJC.4 Unit
(1) USB cable
(1) DJC.4 System Quick Start Guide
(1) DJC.4 Support CD

.

4. Install Software

Now that you have everything connected, it is time to install Virtual DJ LE 7. Virtual DJ LE 7 allows for a lot of advanced functionality,
including FX, loops, and even video control. For even more features, you can upgrade to Virtual DJ 7 Pro, for advanced sampler
functionality, full-screen video output, and more! This upgrade is available through the Virtual DJ website, www.virtualdj.com.

Once you register your copy of Virtual DJ LE 7, you will be offered a discounted upgrade. This upgrade can be purchased directly from
the Virtual DJ website, www.virtualdj.com.

A.
B.

C.

2. Connect the DJC.4 to your gear

Remember, the DJC.4 is a software controller, so and does not provide audio without a computer. As well, it is not an analog mixer. As
such, to be able to DJ with your DJC.4, you will need to have a Mac/PC that meets the minimum requirements for both the DJC.4 and
Virtual DJ. These requirements are:

MINIMUM system requirements:
Intel® Pentium® 4 or AMD Athlon™ XP
1024x768 resolution
DirectX compatible soundcard
512MB RAM
50MB free on the hard drive

RECOMENDED system requirements:
Intel® Core™ 2 or AMD Athlon™ X2
1280x1024 resolution
1024MB RAM
200MB free on the hard drive

Additional requirements for Video mixing:
2048MB (2GB) RAM
ATI™ or NVIDIA® video card w/256MB of Dedicated DDR3 RAM
Video card must support dual-screen output (Virtual DJ Pro only)

Supported Operating System:
MINIMUM: Microsoft® Windows XP SP3 or newer, Apple® OSX™ 10.5 or newer
RECOMMENDED: Microsoft® Windows 7 Professional 32-bit, Apple® OSX 10.6 or newer

Microsoft® Windows 95, 98, ME, or older are not supported
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported

Microsoft® Windows™ is a registered trademark of Microsoft® Corp.
Apple® OSX™ is a registered trademark of Apple® Corp.
Virtual DJ™ is a registered trademark of Atomix™ Productions



Microphone

Computer

MP3 Player

CD/MP3 Player

Tur ntab le

Main balanced power amplifier

Main unbalanced power amplifier