Stanton STR-850 Owners manual

FULL MANUAL

BELT DRIVE TURNTABLE

START/STOP

STR8-50

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

Important Safety Instructions

An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and

1. Read Instructions – All the safety and operating
instructions should be read before this product is
operated.

2. Retain Instructions － The safety and operating
instructions should be retained for future reference.

3. Heed Warnings － All warnings on the appliance
and in the operating instructions should be
adhered to.

4. Follow Instructions － All operating and use
instructions should be followed.

5. Water and Moisture － The appliance should
not be used near water - for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, and the
like.

6. Carts and Stands － The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.

cart combination to overturn.

7. Wall or Ceiling Mounting － The product should
be mounted to a wall or ceiling only as
recommended by the manufacturer.

8. Heat － The appliance should be situated away
from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.

9. Power Sources – This product should be
operated only from the type of power source
indicated on the rating label. If you are not sure of
the type of power supply to your home, consult
your product dealer or local power company. For
products intended to operate from battery power,
or other sources, refer the operating instructions.

10. Grounding or Polarization – This product may be
equipped with a polarized alternation-current line
plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized
plug.

11. Power-Cord Protection－Power-supply cords

should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to the
cord in correspondence of plugs, convenience
receptacles, and the point where they exit from the
appliance.

12. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
Clean by wiping with a cloth slightly damp with
water. Avoid getting water inside the appliance.

13. For AC line powered units - Before returning
repai red unit to user, use an ohm-meter to
measure from both AC plug blades to all exposed
metallic parts. The resistance should be more than
100,000 ohms.

14. Non-use Periods － The power cord of the

appliance should be unplugged from the outlet
when left unused for a long period of time.

15. Object and Liquid Entry－Care should be taken

so that objects do not fall and liquids are not
spilled into the enclosure through openings.

16. Damage Requiring Service－The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled

into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate

normally or exhibits a marked change in

performance; or

E. The appliance has been dropped, or the

enclosure damaged.

17. Servicing －The user should not attempt any

service to the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.