1 2 3
4 5
Product Overview
Turning On | Off
Connecting
Multi-pairing
Charging
Hands Free
Hands Free
Specifications
USER MANUAL
Wireless Bluetooth Headphones
While you‘re listening to your music, you can control
your Bluetooth device with the below action on your
TIE ear phones.
Model: All Round
Bluetooth version: CSR8635|V4.1+EDR
Bluetooth profiles: Headset, Hands free, A2DP, AVRCP
Operating distance: 10M
Talk time: 4-6 hours
Standby time: 150 hours
Charging time: about 1.5 hours
Charing Port: Micro USB
TIE comes with a built-in rechargeable battery, prior
to using it, it is recommended to charge the battery
fully for the first time.
1. Plug another side of cable to the USB port of PC or
into a USB power charger
- Red light on: Charging
- Red light off: Finish charging
2. It will take about 1.5 hours to finish charging
Functions Operation
Volume up Short press “+”button
Volume down Short press “–”button
Last song Long press “+”button
Next song Long press “–”button
Pause Short press MFB once
Play Short press MFB once
Functions Operation
Cancel a call Short press MFB once
Answer a call Short press MFB once
Reject a call Long press MFB about 2
seconds until you hear a tone
End a call Short press MFB once
Redial the last Double click MFB
number
Call transfer Press and hold MFB for 2
(headset to phone) seconds
Call transfer Press and hold MFB for 2
(phone to headset) seconds
Microphone mute Double click MFB
Cancel mute Double click MFB
TIE built-in microphone allows you to answer and
end calls. Please use the chart below to execute your
desired function.
1) Keep your Bluetooth device within 1 meter when
pairing;
2) Make TIE enter pairing mode as shown:
Ensure TIE is off. Press and hold Multi-Function
Button for approximately 8 seconds until red and
blue LED flash rapidly;
3) Using your Bluetooth device, please scan/search
for available Bluetooth devices select “TIE” from
the list of devices shown;
4) If prompted, enter password or PIN No: “0000”
5) If prompted by your mobile phone to connect,
select “Yes”(this will vary among mobile phone
models)
6) After successful connecting, blue LED of headset
will flash twice every 4 seconds
TIE can connect with two Bluetooth cell phones at the
same time. The general pairing procedures are as
follows:
1) Pairing TIE with device A
2) Turn on TIE and make it enter pairing mode again,
and pairing it with device B
3) Operate device A to connect with headset. TIE has
already connected with two devices in this moment
Turning on: Press and hold MFB for 4 seconds
until blue LED flashes
Turning off: Press and hold MFB button about
4 seconds until red LED flashes
Indicator light Multi-Function Buttons
Volume+/Previous song Volume-/Next song
USB charging port Microphone
Loading...