Stanley Black and Decker 1950217, 1950531 User Manual

Wireless
Vacuum Gauge

Operation and Maintenance Instructions

Model

1950217

TABLE OF CONTENTS

Introduction ........................................................................................................2

Safety & Limited Warranty ............................................................................3

Certifications ......................................................................................................4

Quick Start Guide ..............................................................................................5

Wireless Vacuum Gauge Components .....................................................6

Screen & Button Layouts ............................................................................... 7

Technical Specifications ................................................................................8

Operating Instructions ............................................................................. 9-10

Advanced Setting ............................................................................................ 11

Maintenance ..................................................................................................... 12

Troubleshooting ..............................................................................................13

1-800-628-8810

1

INTRODUCTION

It is important to read the entire instruction manual carefully
for a complete understanding of the hilmor® Wireless Vacuum
Gauge features, limitations, and specifications before use.
hilmor® products are designed and manufactured to be used
by trained and licensed HVAC/R technicians. Incorrect use may
result in accidents, injuries or death. Refer to page 3 for safety
precautions.

The hilmor® Wireless Vacuum Gauge come with a two-year
limited warranty. Visit hilmor.com/registration to register
the gauge and activate the warranty.

The hilmor® Wireless Vacuum Gauge offers the ability
to replace the remote sensor if the original one gets
contaminated. This manual should also be referred to when
changing out the remote vacuum sensor.

The serial number can be found on the product label located on
the backside of both the Handheld Display and Remote Sensor
unit.

hilmor® Wireless Vacuum Gauge Replacement Sensor
part number: 1950219

2

hilmor.com

SAFETY/LIMITED
WARRANTY

SAFETY PRECAUTIONS:

• To prevent personal injury, please read the operating manual carefully and
operate only as instructed.

• Wear safety glasses, gloves and all other recommended safety gear when
working with refrigerants. Contact with refrigerants may cause injury. Please
see any warnings associated with refrigerants.

LIMITED WARRANTY:

• The hilmor® Wireless Vacuum Gauge has a 2-year limited warranty from the
purchase date.

• Product must be registered at hilmor.com/registration to
activate the warranty.

• Warranty service claims are subject to authorized inspection for product
defects. If found defective, hilmor will repair or replace registered products
within warranty period.

• Often, a returned hilmor® Wireless Vacuum Gauge can be serviced with field
maintenance, such as cleaning or replacing the remote sensor or making
minor adjustments found in the Troubleshooting section of this manual. If
the problem persists, contact hilmor Technical Support at 1-800-642-0010
or visit the hilmor website, hilmor.com.

1-800-628-8810

3