Stanley TMX-102FM User Manual
TV Mount Installation Guide
Thank you for choosing Stanley – the hardware of choice
for Architects, Contractors, and Home Owners for its
quality, performance and dependability.
Enclosed are your step-by-step instructions for an install
made easy.
If you get stuck, give customer service a call at 1-855-816-6868
You can also reach us at contact@stanleymounts.com
Model: TMX-102FM
www.stanleymounts.com
Caution: Please read the entire manual before proceeding
!
View warranty and disclaimer on page 12
Getting Started
Before we start lets make sure we have the correct mount and all
the required tools and hardware to complete the installation.
The TV is a Flat Panel TV is between 13” - 42” and weighs no more than
50lbs/23kg.
The Wall the TV will be mounted on is either concrete or dry wall with
wood studs.
You have all of the following tools:
Drill Screwdriver Pencil Level Stud Finder Tape Measure Hammer Wrench Drillbit
Check out our free level app in the app store!
If you answer “Yes” to all the questions above then you are ready
2
to begin the TV Mount installation!
Caution: This product contains small items that could be a choking hazard if swallowed.
!
Parts & Hardware
Caution: Before starting assembly, verify all parts are included and undamaged. If any
parts are missing or damaged, do not return the damaged item to your dealer; contact
!
Customer Service. Never use damaged parts or previously used parts!
Spanner Allen Wrench
3
Loosen the 2 bolts behind the
1
mounting plate, then lift and
remove the plate.
Check what screw size will t
2
in your TV. (E,F,G,H,I,J,K,L)
If your TV has a curved back
you may need to use longer
screws with spacers.
Tools Required:
Step 1: Attach TV to Mounting Plate
1 2
D
Screwdriver
4
Loading...