Page 1
Day
Timer
R
h+
m+
™
TimerMax
Liquid Crystal Display (
DO NOT EXCEED 1875 WATT, 15 AMP MAX. LOAD
TimerMaxOutdoor
Time Timer Day h+ m+
LCD
)
™
Reset Override
BUTTON FUNCTIONS
/Time –
Timer
Day
h+
m+
/Override
button is pressed it will change the current state
from
programmed time is reached the timer will revert
to the programs control.
R/Reset – Clear all settings.
Timer button
The first press of the
”Timer” button displays
the ON settings for the
1
st program, the second
press– its OFF settings.
The third press displays
the ON settings for the
2
nd program, and so on
to the twelfth press of the ”Timer” button, which
displays the OFF settings for the
You don’t need to use all six
Day button settings for Timer mode
1. MO TU WE TH FR SA SU – Daily
2. MO will only operate Monday.
3. TU will only operate Tuesday.
4. WE will only operate Wednesday.
5. TH will only operate Thursday.
6. FR will only operate Friday.
7. SA will only operate Saturday.
8. SU will only operate Sunday.
9. MO TU WE TH FR – Weekday
10. SA SU – Weekend
11. MO TU WE TH FR SA – 6 Day
Set and display present day and time.
– Set/view 6“
– Set day(s). See eleven different settings
below [Hold for fast forward].
– Set hours. [Hold for fast forward]
– Set minutes. [Hold for fast forward]
“
OFF”to “ON”or vice versa. When the next
”
ON/OFF“settings will repeat every day.
will operate Monday to Friday.
will operate Saturday and Sunday.
will operate Monday to Saturday.
ON/OFF”programs.
– Manual “ON/OFF”. When this
MO TU WE TH FR SA SU
TIMER
ON
--:--
1
This number shows
which program of
six is being viewed.
6
th program.
“
ON/OFF” programs.
http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week
Customer Service Assistance
Toll Free 800-730-3707
TimerMax™/TimerMaxOutdoor
OPERATING INSTRUCTIONS
Read instructions carefully in order to set-up your TimerMax properly.
1
PLUG THE TIMER INTO AN 125V OUTLET
accessible. Allow built-in batteries to initially charge for ten minutes,
fully charge in five hours. [Once fully charged the battery will
remember your settings for up to six months.] If the display appears as
shown here (flashing), proceed to step 2. If not, press and release small “R/Reset” button
gently with a pencil point or opened paper clip.
2
To SET CURRENT DA
Y AND TIME, the ” /Time” button must be
pressed and held, throughout this step. Press the ”Day” button until
the present day of the week appears. Do the same with the ”h+”and
”m+” buttons to set the time. Note that either A or P appears in the
bottom right of display window to indicate AM or PM.
3
To SET THE TIMER
, press the ”Timer” button once and the display
will appear as shown here. Next, set the time [with the ”h+” and
”m+” buttons, as above] and day(s) you want your appliance/light
“ON”
[refer to the Day button section on the bottom LEFT of this
page for a list of 11 different day(s) options]. Press the ”Timer” button a second time [note that OFF appears in the display] and set the
time and day(s) you want your appliance/light “OFF”. For more detail,
see examples on other side. This step can be repeated five times,
for a total of 6“
4
Press the ” /Time” button to return to current day and time display.
5
Finally, plug your appliance/light into the timer. Be sure that the item plugged into the
ON/OFF”programs.
timer is switched “ON”.
HINTS and TIPS
The rechargeable battery in the timer should be charged first by plugging it into a
(
regular household outlet (125V) for ten minutes.
Ensure the “ON/OFF” switch on your appliance or light is in the “ON” position when
(
connected to the timer.
Do not expose the timer to extremely high or low temperatures. Do not place in
(
direct sunlight.
(
TimerMax is for indoor use only. TimerMax Outdoor is weatherproof.
Display is clearer when viewed from above.
(
To fast forward, press and hold the “h+”, “m+” or “Day” button.
(
Check your programmed times by pressing the “Timer” button (up to 12 commands
(
available).
Ensure the hour has been set correctly to AM or PM, indicated either by A or P.
(
(
For any given day and time, if one program is set to ON, and another program OFF,
TimerMax will turn your appliance/light OFF.
(
Return to the clock function by pressing the “ /Time“ button.
140 58th Street, PO Box 67, Brooklyn, NY 11220
718-943-7000 •
is the trademark of The Stanley Works and Subsidiaries. Produced under license by The NCC, Brooklyn, New York.
that is visually and manually
Toll Free 800-730-3707
MO
OFF
12:00
MO TU WE TH FR SA SU
OFF
3:35
MO TU WE TH FR SA SU
TIMER
ON
--:--
1
This number
represents which
program of six is
being viewed.
•
www.thencc.com
™
P
Page 2
Day
Timer
R
h+
m+
Time Timer Day h+ m+
Reset Override
Customer Service Assistance
Toll Free 800-730-3707
TimerMax™/TimerMaxOutdoor
Here below, are step-by-step instructions for setting your timer in two different examples:
™
TimerMax
™
TimerMaxOutdoor
™
Example A
To switch an appliance or light “ON”
every day of the week at 8:10 pm
and “OFF” at 11:06 pm follow the
steps below:
a
Press ”Timer” button once to show:
MO TU WE TH FR SA SU
TIMER
ON
--:--
1
b
Press ”h+ ”button until 8:-- pm
appears. Note that the small P
at the bottom right of display
window shows PM.
MO TU WE TH FR SA SU
TIMER
ON
1
c
Press ”m+” button until 8:10 pm
appears.
MO TU WE TH FR SA SU
TIMER
ON
1
d
Press ”Timer” button again to set
the OFF time, display will now
show:
MO TU WE
TIMER
OFF
1
e
Press ”h+” button until 11:00 pm
appears:
MO TU WE TH FR SA SU
TIMER
OFF
1
f
Press ”m+” button until 11:06 am
appears:
TU WE TH FR SA SU
MO
TIMER
OFF
1
Your timer is set to go “ON” every
day of the week at 8:10 pm and
“OFF” at 11:06 pm.
:
--
8
8:10
TH FR SA SU
--:--
:
--
11
11:06
P
P
P
P
Three Year Power Warranty
Example B
To switch an appliance or light “ON” at 1:30 pm
Saturday and “OFF” at 7:15 am Monday follow the
steps below. [Let’s assume you have already set
timer program 1, and now want to set another].
a
Press ”Timer” button
until program 2appears.
This is the next available
“ON” program:
b
Repeatedly press ”Day”
button until SA
(Saturday) appears:
c
Press ”h+” button until
1:-- pmappears.
d
Press ”m+” button until
1:30 pmappears.
e
Press ”Timer” button
again to set the OFF
time, display will now
show:
f
Repeatedly press ”Day”
button until MO
(Monday) appears:
g
Press ”h+” button until
7:-- amappears.
h
Press ”m+” button until
7:15 amappears.
Your timer is set to go “ON” at 1:30 pm Saturday
and “OFF” at 7:15 am Monday.
MO TU WE TH FR SA SU
TIMER
ON
--:--
2
TIMER
ON
--:--
2
TIMER
ON
-
2
TIMER
ON
2
MO TU WE TH FR SA SU
TIMER
--:--
OFF
2
MO
TIMER
--:--
OFF
2
MO
TIMER
OFF
2
MO
TIMER
OFF
2
SA
SA
:
--
1
SA
1:30
:
--
7
7:15
Liquid Crystal Display (LCD)
DO NOT EXCEED 1875 WATT, 15 AMP MAX. LOAD
/Time – Set and display present day and time.
Timer – Set/view
Day – Set day(s). See eleven different settings
below [Hold for fast forward].
h+ – Set hours. [Hold for fast forward]
P
P
A
A
m+ – Set minutes. [Hold for fast forward]
/Override – Manual
button is pressed it will change the current state
from “OFF”to “ON”or vice versa. When the next
programmed time is reached the timer will revert
to the programs control.
R/Reset – Clear all settings.
Timer button
The first press of the
”Timer” button displays
the ON settings for the
1
st program, the second
press– its OFF settings.
The third press displays
the ON settings for the
2
nd program, and so on
to the twelfth press of the ”Timer” button, which
displays the OFF settings for the 6th program.
You don’t need to use all six “ON/OFF” programs.
Day button settings for Timer mode
1. MO TU WE TH FR SA SU – Daily
”
ON/OFF
2. MO will only operate Monday.
3. TU will only operate Tuesday.
4. WE will only operate Wednesday.
5. TH will only operate Thursday.
6. FR will only operate Friday.
7. SA will only operate Saturday.
6
“
ON/OFF”programs.
“
ON/OFF”. When this
MO TU WE TH FR SA SU
TIMER
ON
--:--
1
This number shows
which program of
six is being viewed.
settings will repeat every day.
“
If within the first year from date of purchase, this unit fails due to a defect, exchange
where purchased, or ship it prepaid with proof of purchase to THE NCC, 140 58th Street,
PO Box 67, Brooklyn, New York 11220. Units that fail to operate during the second or
third year from date of purchase must be shipped prepaid with proof of purchase
to THE NCC. We will replace unit. This guarantee excludes normal wear and tear
and damage resulting from accident, alteration, or misuse.
8. SU will only operate Sunday.
9. MO TU WE TH FR – Weekday
will operate Monday to Friday.
10. SA SU – Weekend
will operate Saturday and Sunday.
11. MO TU WE TH FR SA – 6 Day
will operate Monday to Saturday.
Loading...