Stanley SXAC2036121 User Manual

AIR COMPRESSOR
2HP 36L

MODEL NO.

SXAC2036121

For service, spare parts or product information,
please contact Smart Marketing Group Pty. Ltd.

AUST. 1300 660 457 N.Z. 0800 474 876

3616 10/18

SUGGESTED APPLICATIONS

You may use some light duty air tools with this compressor.
Some examples of light duty tools are:

• Ball Inflator

• Toy Inflator

• Tyre Inflator

• Mini Air Brush

• Touch Up Spray Can

• Stapler

• Combo Nailer

• C-Bradder

• T-Nailer

This light duty air compressor is NOT recommended for use
with a spray gun. Always check the air requirement of the
tool wishing to be used to ensure that it is within this air
compressor’s air output.

CONTENTS

Section Page

Contents 2

Suggested Applications 2

Introduction 3

Guarantee 3 – 4

General Safety Instructions 5 – 7

Electrical Information 8

Specific Safety Instructions 8

Components and Controls 9

Operating Instructions 10 – 15

Maintenance 16

Trouble Shooting 16

Parts Diagram 17

Technical Information 18

Contact Information 18

Please take note of serial number and write here for
ease of reference:

Serial Number:

Date of Purchase:

Place of Purchase:

Receipt Number:

2

INTRODUCTION

Dear Customer,

Thank you for purchasing this compressor which has
passed through our extensive quality assurance processes.
Every care has been taken to ensure that it reaches you
in perfect condition. However, in the unlikely event that
you should experience a problem, or if you require any
assistance, please do not hesitate to contact us;

If you have a problem, call customer service do not
return this compressor to the place of purchase.

CUSTOMER SERVICE

Australia: 1300 660 457
New Zealand: 0800 474 876
Operating times: Monday – Friday

8.00am - 5.00 pm
Australian Eastern Standard Time (AEST)

EXPRESS WARRANTY
STATEMENT - COMPRESSOR

You are not required to do anything to register your
compressor purchase. Please attach the purchase receipt
to this manual and ensure both are kept safe. We hope you
enjoy your new compressor, and if you have any problems
call customer service on the above phone numbers. Do not
return to place of purchase.

Smart Marketing Group Pty Ltd (SMG) warrants
that this compressor will be free from manufacturing faults
or defects for 24 months from the date of
purchase, providing original purchase receipt is kept
and shown when needed and is subject to the terms
and conditions below.

If a warranty fault appears within the warranty period,
SMG reserves the right to replace or repair the product.
In the event that SMG chooses to replace the product,
this original warranty will expire at the original date.
If the product includes various accessories or components,
only the defective accessory or component will be replaced
or repaired.

SMG reserves the right to replace defective parts of the
product with parts and components of similar quality,
grade and composition where an identical part or
component is not available.

Products presented for repair may be replaced by
refurbished products of the same type rather than
being repaired. Refurbished parts may be used to
repair the products.

What is covered.

• Manufacturing fault or defect.

How to claim under this warranty.

• Call customer service.

• Ensure you have the following : Original purchase
receipt, Model of compressor, Serial number of
compressor.

• Discuss the issue.

• Customer service will advise which authorised service
agent to take the compressor to provided the issue is a
warranty one.

• Take compressor to authorised service agent for repair.

What is not covered.

• Commercial use of compressor.

• Use of compressor for hire

• Use of compressor in a commercial premises.

• Damage or deterioration due to transport.

• Damage caused by negligence, misuse, abuse or
accident or incorrect voltage and wattage.

• Any corrosion or rusting.

• Damage caused by incorrect set up and start up.

• Replacement parts due to general wear and tear.

• Compressors with serial number defacement,
modification or removal.

• Compressors which have been serviced by other than
an authorised SMG service agent.

• Compressors with no original purchase receipt.

• Compressors which have been on sold,
not original purchaser.

• Damage due non-servicing of compressor as is
required by this manual.

• Blockages / damage caused by dust, dirt, spiders
webs or insects.

• Damage caused by the incorrect fitting of accessories.

• Damage caused by overloading, overworking
the compressor.

• Damage to attached equipment or third
party accessories.

• Damage caused by attached equipment or
third party accessories.

CONTACT DETAILS

Smart Marketing Group Pty Ltd
33-35 Lionel Road, Mt. Waverley
Victoria 3149, Australia.
Tel [phone]
Fax [phone]
[e-mail]

3

COMPLETE WARRANTY STATEMENT – COMPRESSOR

As soon as you have purchased the compressor, we
recommend that you check to make sure it is intact and
that you read the operating instructions carefully before
using it. The purchase receipt for this product is to be
retained and must be presented if making a claim under
the terms of the Smart Marketing Group (SMG) warranty.
Bank account statements are not acceptable for proof
of purchase.

This warranty does not cover compressors intended for
hire or use in commercial applications or in commercial
premises. The warranty will under no circumstances
extend to reimbursement or payment of damages, whether
direct, indirect or consequential. The warranty is void
if there is evidence the compressor has been modified
or tampered with in any way or used with unauthorised
accessories without our consent.

SMG declines any responsibility or liability whatsoever
arising from misuse or abuse, negligent handling of the
compressor or if the product has not been installed or
failure to comply with the relevant safety, operating,
setting and maintenance instructions (see further in
this manual).

The warranty does not extend to installation or
disconnection costs.

Any item sent freight forward /collect for repair will be
refused. Warranty repairs are free of charge, provided
the appliance is delivered to our service department or
authorised service agent. The compressor will need to be
returned, adequately protected in a box. SMG will not be
responsible for any in-transit loss or damage. Assistance
under the warranty will only be made available if the
request is made to our customer service team on the
contact numbers listed below and proof of purchase
is provided.

This is a repair only warranty you will need to take
the compressor to the authorised service agent after
contacting our customer service centre.

If the product includes various accessories or components,
only the defective accessory or component will be replaced
or repaired.

SMG reserves the right to replace defective parts of the
product with parts and components of similar quality,
grade and composition where an identical part or
component is not available.

Products presented for repair may be replaced by
refurbished products of the same type rather than
being repaired. Refurbished parts may be used to
repair the products.

Damage caused by third party accessories is not covered
under this warranty.

Damage caused to attached equipment or third party
accessories will not be covered under this warranty.

Rust and corrosion are not covered under this warrant y.

If a warranty fault is found, the freight cost will be credited
to the owner. If no fault is found, the product will be
returned and any costs associated with the service will be
charged to the owner.

Blockages caused by spider webs, insects, dirt or
accumulated dust are not covered by warranty. SMG
reserves the right to replace or repair the appliance within
the warranty period. Parts found to be defective due to a
manufacturing default will be replaced free of charge.

In the event of SMG choosing to replace the appliance, the
warranty will expire at the original date of purchase. If no
warranty fault is found the owner will be advised and the
product will be returned and any costs associated with the
service will be charged to the owner.

Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure. The
benefits of this warranty are in addition to any rights
and remedies imposed by Australian State and Federal
legislation that cannot be excluded.

In New Zealand, this SMG warranty is in addition to the
conditions and guarantees which are mandatory as implied
by the New Zealand Consumer Guarantee Act 1993.

CONTACT DETAILS

Smart Marketing Group Pty Ltd

33-35 Lionel Road, Mt. Waverley

Victoria 3149, Australia.

Tel [phone]

Fax [phone]

[e-mail]

4

LUBRICATION OF COMPRESSOR

This compressor is OIL FREE. Therefore there
is NO oil used for lubrication.

ASSEMBLY

This compressor MUST be fully assembled by you prior to
use. Failure to do so will result in the warranty being VOID.
Failure to fully assemble this compressor may also result in
personal injury.

WORK ENVIRONMENT

Do not expose your air compressor to rain or use in damp
or wet conditions. Keep the work area well lit. Always
ensure your compressor is level and stable. Using your
compressor on unlevel or unstable ground may cause it to
tip over, this damage will not be covered under warranty.
Do not use your air compressor in the same area that you
are spray painting or sanding. Always use your compressor
in clean air. If needed use a longer air hose to reach your
work area.

SAFETY

Before attempting to operate this air compressor the
following basic safety precautions should be taken to
reduce the risk of fire, electric shock and personal injury.
It is important to read the instruction manual and to
understand applications, limitations and potential hazards
associated with the air compressor. This air compressor
is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.

BEWARE OF CHILDREN AND PETS

Children and pets should be kept out of the work area.
Children should not be allowed to touch or operate the air
compressor, tools or extension cords. This air compressor
is not designed for use by young children or infirm persons
without supervision. The air compressor and tools should be
kept out of reach of children, preferably stored or locked in a
secure cabinet or room when not in use.

WORK AREA

Work areas and benches should be kept tidy. Cluttered
benches and work areas can cause accidents. Floors
should be kept clean and free from rubbish. Special care
should be taken when the floor is slippery due to sawdust
or wax. Always leave sufficient distance, at least 5 metres
between the air compressor and the work area, especially
when using tools designed for sanding or spraying liquids.
If needed, use a longer air hose to reach your work area.

GUARD AGAINST ELECTRIC SHOCK

Avoid body contact with earthed or grounded surfaces
(e.g. pipes and refrigerators).

DO NOT OVERLOAD AIR COMPRESSORS

The air compressor will do a better, safer job and give you
much better service if it’s used at the duty cycle for which it
was designed. The duty cycle will only take effect after the
initial (1st ) tank fill for the day. This air compressor’s duty
cycle is 75% . Duty cycle is the proportion of time during
which the air compressor is operated. This means after 45
seconds of operation, motor pumping, the air compressor
must be left for 15 seconds resting, motor not pumping.
When the motor is pumping the attached air tool can not be
used. Only use the attached air tool while the compressor
is not pumping. Stop using the attached tool as soon as the
air compressor starts pumping.

USE THE RIGHT TOOL

Select the right tool for the job. Do not use a tool for a
job for which it was not designed. Do not force a small air
compressor to do the job of a heavy–duty air compressor.
Do not use the air compressor for purposes not intended.

5

DO NOT ABUSE
THE POWER CORD

Never yank or pull on the power cord to disconnect it
from the mains supply socket. Never carry or pull your air
compressor by its power cord. Keep the power cord away
from heat, oil, solvents and sharp edges. If the power
cord becomes damaged have it replaced by an authorised
service facility.

EXTENSION CORDS AND REELS

This air compressor MUST be plugged directly into a 240V
AC wall socket.

This air compressor is NOT designed to be run off an
extension cord/lead. If you need extra distance do NOT
use an extension cord, USE A LONGER AIR HOSE.

The use of extension cords may cause power voltage loss
and will result in damage to the motor. This will NOT be
covered under warranty.

SECURE THE WORK PIECE

Whenever possible secure the work piece using clamps or
a vice. It is safer than using your hands or feet and leaves
both hands free to control the tool.

HOT COMPONENTS

Beware many of the components will get hot during use.
Never touch any of the metal pipes, pump or motor as
these may burn.

MAINTAIN YOUR AIR
COMPRESSOR WITH CARE

Follow the instructions for cleaning and changing
accessories. Check the air compressor power cord
periodically and if damaged have it replaced by an
authorised service facility. Keep handles clean, dry and
free from oil and grease. Ensure that ventilation slots
are kept clean and free from dust at all times. Blocked
ventilation slots can cause overheating and damage to
the motor.

DISCONNECT AIR COMPRESSOR

Ensure that the air compressor is disconnected from the
mains supply when not in use, before servicing, cleaning,
making adjustments or when changing any accessories.

REMOVE ADJUSTING KEYS
AND WRENCHES

Form the habit of always checking to see that any adjusting
keys or wrenches have been removed from
the air compressor before operating.

AVOID UNINTENTIONAL STARTING

Ensure that the switch is in the ‘OFF’ position before
plugging the air compressor into the mains supply.

PROTECT FURNISHINGS

If using the air compressor inside your house, protect
furnishings and floors with a suitable dust sheet.

FIRE PRECAUTIONS

When using the air compressor inside your house
or workshop general fire precautions should be
observed. As a precaution it is recommended that an
expert is consulted on obtaining and using a suitable
fire extinguisher.

CLEANING YOUR AIR COMPRESSOR

Always disconnect your air compressor from the mains
power supply before you commence cleaning. Always
ensure that your air compressor has cooled, about one (1)
hour, before cleaning and storing. When cleaning your air
compressor use only a damp soft cloth. NEVER use liquid
or solvents of any type.

6