Stanley STGL2018, STGL2218 Original Instructions Manual
STGL2018
STGL2218
English Page 5
2
ENGLISH (Original instructions)
A
C1
B
4
3
1
2
20
3
6
7
5
3
(Original instructions) ENGLISH
C2 C3
E
D
10
8
9
7
6
3
10
8
6
7
10
8
6
7
4
10
10
11
90
o
4
ENGLISH (Original instructions)
F
G
15o-30
o
A B
5
(Original instructions) ENGLISH
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
Danger: Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
Warning: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
Caution: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
Notice: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Warning: To reduce the risk of injury, read the
instruction manual.
General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
STGL2018 STGL2218
Input voltage V
AC 220-240 220-240
Power input W 2000 2200
Frequency Hz 50/60 50/60
No-load speed min
-1
8500 8500
Wheel diameter mm 180 180
Spindle size M14 M14
Max disc thickness
Grinding discs mm 6.6 6.6
Weight kg 4.9 5.9
Specifications
Loading...