Stanley QED100, QED300, K2 Installation Instructions Manual

1-855-365-2407

EXIT DEVICE

WIRING T

EMPLATE

K2 QED100/300 SERIES WITH :

LR (ELECTRIFIED LATCH RETRACTION)
ED (ELECTRIFIED DOGGING)

NOTES:

Route wires as shown
and terminate at the
power transfer device.

1.) Use QED100/300 series template for door
preparation. provide additional prep, as
shown, for electric lock modifications.

2.) Left hand reverse shown; opposite for
right hand reverse models.

3/8” Raceway

Reinforcement plate
recommended for
device mounting.

Power transfer

Mounting tab – see QED100/300 series
template for proper installation.

device

Power transfer

device

Door fabricator to provide a 3/8”
diameter (minimum) raceway through
door to allow the insertion of electrical
wires running between the exit device
and the power transfer device.

2 / 3

40” to
finished floor