Stanley P2350S, P2750S, P2350S-CAN, P2750S-CAN Owner's Manual

Gas Pressure Washer Owner’s Manual

This Manual Contains Important Safety Instructions and Operating Instructions

Models: P2350S, P2750S, P2350S-CAN, P2750S-CAN

Contents:

Page 2 Factory Original Parts
Page 3 Package Contents/Component Identification
Page 4 Wheel Kit Assembly and Product Specifications
Page 5 Missing Parts Request Form
Page 6 Warnings
Page 8 Preparation & Assembly
Page11 Operation
Page 15 Maintenance
Page 16 Transporting and Storage
Page 17 Tips for Cleaning
Page 18 Troubleshooting
Page 19 Limited Warranty

QUESTIONS OR NEED HELP?

Call: [1] 919-550-3259

www.PressureWasher911.com

DO NOT RETURN THIS

PRESSURE WASHER TO

THE STORE!

Have the following information ready when you call us:
Date of Purchase: _____________________________
Location of Purchase: __________________________
Serial #: ____________________________________

IMPORTANT SAFETY INSTRUCTIONS:

READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY

SAVE THESE INSTRUCTIONS

Is a registered trademark of The Stanley Works or its affiliates and
is used under license by GXi Outdoor Power, LLC, 7868 Highway 70
Business, Clayton, NC 27520

Wheel kit sold separately or may be
included in certain models only.

ORDER ONLINE

www.PressureWasher911.com

Phone orders, call [1] 919-550-3259

Please have the part number and credit card ready when calling.

Replacement Gun

Part Number: SP02610
Price: $35.99

High Pressure Replacement Variable Adjustable
Wand

Part Number: SP02710 (Model: (P2350S, P2750S,

P2350S-CAN, P2750S-CAN)

Price: $39.99

Replacement 25’ High Pressure Hose

Part Number: SP02910 (Model: (P2350S, P2750S,

P2350S-CAN, P2750S-CAN)

Price: $39.00

Replacement Brass Garden Quick Connect
Coupling & Inlet Adapter

Part Number: SP01309
Phone Price: $18.00 Each

For replacement parts not listed here,

see pages 3

FACTORY ORIGINAL STANLEY PARTS

STANLEY is the Official Sponsor of NASCAR Racing

Wheel Kit (handle and wheels)

Part Number: SG00110
Phone Price: $39.99 Each

3 of 18

®

STANLEY Electric Pressure Washers

Rev: Dec2010

Package Contents/Component Identification

Order replacement parts online: www.PressureWasher911.com

Phone orders, call [1] 919-550-3259. Please have the part number and a credit card ready when calling.

PARTS LIST for Model P2350S, P2750S, P2350S-CAN, P2750S-CAN

Part Letter Part Name Number of Pieces Replacement Part Number

A Gun Assembly 1 SP02610

B High Pressure variable adjustable wand 1 SP02710
C Recoil Assembly 1 SP02810

D 25’ High Pressure Hose (P2350S, P2750S, P2350S-CAN, P2750S-CAN) 1 SP02910

E Lifting Handles SP03010

F Pressure Washer Feet and Bolts

4 SG00110

G Muffler 1 SP03110
H Oil Fill Cap 1 SP03210

I Soap Bottle and Injection Hose 2 SP01809

J Owner’s Manual (in hardware bag) 1 SP03310

K 17mm Wrench (in hardware bag) 1 SP03310

L Cleaning Needle (in hardware bag) 1 SP03310

M Plastic Quick-connect Coupling & Inlet Adapter

2 SP02509

N Water Inlet Filter (in hardware bag) 1 SP03310

O O-Rings (in hardware bag) 2 SP03310

P On/Off Switch 1 SP03410

Q Wrench 8mm - 10mm (in hardware bag) 1 SP03310

R Spark Plug Wrench (in hardware bag) 1 SP03310

I

A

B

D

F

M K

L

J

N O

P

E

C

G

H

Q

R

Rev: Dec2010

4 of 18

®

STANLEY Electric Pressure Washers

Model

P2350S P2750S

Max. Pressure 2350 PSI 2750 PSI
Max. Water Flow 2.3 GPM 2.5 GPM
Pump Type axial axial
Engine 5 HP 6.5 HP

Wands included 1 1
Fuel Type Unleaded Gasoline Unleaded Gasoline

Fuel Capacity .75 gal .75 gal

Engine and pump oil Type SAE 10W-30 SAE 10W-30

Engine Oil Capacity .75 quarts .8 quarts

Soap or Detergent Injector Bottle Bottle
High Pressure Hose 25’ 25’

Water Supply Cold Water Only Cold Water Only
Mobility Wheel Kit Sold Separately Wheel Kit Sold Separately

Wheel Kit Assembly

Order replacement parts online: www.PressureWasher911.com

Phone orders, call [1] 919-550-3259. Please have the part number and a credit card ready when calling.

PRODUCT SPECIFICATIONS

Wheel kit sold separately or
may be included in certain
models only.

Step 1: Insert the handle and attach using tools provided in the

hardware bag.

Step 2: If you previously installed the 2 feet on the

back of the pressure washer, remove the 2 feet
from the back of the pressure washer frame
with the wrench provided in the hardware bag.

Step 3: Attach the wheels to the back of

the pressure washer underneath
the handles.

5 of 18

®

STANLEY Electric Pressure Washers

Rev: Dec2010

Missing Parts Request Form

Name

Phone

Email

Address

IMPORTANT: Please include your receipt. Without a receipt, your order will be
delayed. You may also email us at:

[e-mail]
Fax: [phone]

If emailing, please scan in your proof of purchase.

Comments:

Please indicate the part that you are missing:

Hardware bag

Model #:

Other

Serial #:

Date of purchase

Other fine products offered by

Electric Pressure Washer Commercial Mowers

Rev: Dec2010

6 of 18

®

STANLEY Electric Pressure Washers

Warnings

The engine exhaust from this product contains chemicals known to the
State of California to cause cancer, birth defects or other reproductive
harm.

WARNING

WARNING

Use of a pressure washer can create puddles and slippery surfaces.

High pressure spray could cause you to fall if you are too close to the
cleaning surface.

 Keep spray nozzle between 18 to 24 inches away from cleaning surface.
 Operate this unit on a stable surface.
 The cleaning area should have adequate slopes and drainage to reduce

the possibility of a fall due to slippery surfaces.

 Be extremely careful if you must use the pressure washer from a ladder,

scaffolding or any other relatively unstable location.

 Firmly grasp spray gun with both hands when using high pressure spray to

avoid injury if gun kicks back.

A running engine gives off carbon monoxide, an odorless, colorless,
poison gas.

Breathing carbon monoxide can cause nausea, fainting or death.

Some chemicals or detergents may be harmful if inhaled or ingested,
causing severe nausea, fainting or poisoning.

 Operate pressure washer ONLY outdoors.
 Keep exhaust gas from entering a confined area through windows,

doors, ventilation intakes or other openings.

 DO NOT operate pressure washer inside any building or enclosure, even

if doors or windows are open.

 Use a respirator or mask whenever there is a chance that vapors may be

inhaled.

 Read all instructions with mask so you are certain the mask will provide

the necessary protection against inhaling harmful vapors.

DANGER

Fire and Burn Hazards

 The exhaust system gets hot enough to ignite some materials.
 Fuel and its vapors are extremely flammable and explosive.
 Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

 Turn pressure washer OFF and let it cool at least 5 minutes before re-

moving gas cap.

 Fill fuel tank outdoors with regular unleaded gas.
 DO NOT overfill tank. Allow space for fuel expansion.
 Keep fuel away from sparks, open flames, pilot lights, heat, and other

ignition sources.

 DO NOT light a cigarette or smoke.
 In case of fuel spill, immediately wipe up and clean the spill and move

the unit. Do not operate unit in spilled gas.

WHEN OPERATING EQUIPMENT

 DO NOT tip engine or equipment at an angle which causes fuel to spill.
 DO NOT spray flammable liquids.

WARNING

This owner’s manual is considered a permanent part of the product and should
remain with the product if resold. The information and specifications included
in this publication were in effect at the time of approval for printing.
GXi Outdoor Power, LLC, reserves the right to discontinue or change specifica­tions or design at any time without notice and without incurring any obligation
whatever. No part of this publication may be reproduced without written per­mission.

SAFETY LABEL LOCATIONS

These labels warn you of potential hazards that can cause serious injury. Read
them carefully. If a label comes off or becomes hard to read, contact your
STANLEY dealer for a replacement.

SAFETY INFORMATION

STANLEY products are designed to give safe and dependable service if oper­ated according to instructions. Read and understand this owner’s manual
before operating your generator.

OPERATOR RESPONSIBILITY

Know how to stop the product quickly in case of emergency. Understand the
use of all product controls, output receptacles, and connections. Be sure that
anyone who operates the product receives proper instruction. Do not let chil­dren operate the product.

EMISSION CONTROL SYSTEM INFORMATION

The U.S. and California Clean Air Acts
EPA and California regulations require all manufacturers to furnish written
instructions describing the operation and maintenance of emission control
systems. The following instructions and procedures must be followed in order
to keep the emissions from your STANLEY engine within the emission stan­dards. Maintenance, replacement, or repair of the emission control devices
and systems may be performed by any engine repair establishment or individ­ual, using parts that are ‘‘certified’’ to EPA standards.