Page 1
Model # HMT-275S
USE AND CARE GUIDE
5 DRAWER TOOL CABINET
Questions, problems, missing parts?
Before returning to the store, call
1-866-441-5080
8 a.m – 6 p.m., EST, Monday-Friday
Page 2
Table of Contents
Table of Contents .................................................. 2
Safety Information ............................................... 2
Warranty ................................................................ 3
Specifications ........................................................ 3
Package Contents .................................................. 3
Hardware Included ........................................................... 3
Safety Information
1. Do not pull this unit, push it when moving.
2. Use the brakes when this product is not being
moved. This prevents the product from rolling.
3. Secure this product properly before moving it with a
forklift.
4. Do not tow the product with power equipment.
5. Do not alter this product in any manner. For
example, do not weld external lock bars or attach
electrical equipment.
Assembly ............................................................... 5
Operation
Care and Cleaning
................................................. 6
5 ............................... ................................ ecnanetniaM
6 ..............................................................
CAUTION: Keep the product on level surfaces.
The product may become unstable and tip if
stored or moved on an unlevel surface, which
may cause personal injury or product damage.
Lock the drawers before moving
CAUTION:
this product. The drawers could come open and
make the product unstable and tip, which may
cause personal or product damage.
6. When locking a cabinet, close
in order for the rear
CAUTION:
product to a vehicle. This may cause personal
injury or product damage. Mounting this
product to any vehicle in any manner will void
warranty.
CAUTION:
may fall which may cause personal injury.
CAUTION:
one drawer. The product may become unstable
and tip, which may cause personal injury or
product damage.
lock bars to work properly.
Do not attach or mount this
Do not stand on this product. You
Be careful when opening more than
the drawers completely
2
Page 3
Warranty
This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective,
call 1-866-441-5080 for repair or replacement parts or disposition. Guarantee does not include normal wear and tear.
Specifications
Casters support up to
NOTE: Begin product assembly close to t nal
intended location of your cabinet. This product is
heavy and may be di
cult to move after assembly.
)reward tenibac( rep thgiew mumixaM
50 lbs.
600 lbs.
Package Contents
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
Part Description
M8 x 25 bolt
16
AABB
CC
M6 x 16 bolt
Washer
BB
CC
Quantity
4
4
DD
DD
3
Wrench 1
Page 4
Package Contents (continued)
NOTE:
The keys are taped to the top of the
unit.
A
B
C
Part Description Quantity
A
B
C
D
Cabinet 1
Cabinet handle 1
Fixed caster
Swivel caster
4
2
2
D
Page 5
Assembly
1
□ Position the cabinet handle (B) behind the holes on the
□ Attach with the bolts
Attaching the cabinet handle
cabinet (A).
(BB) and washers (CC) tighten with a
wrench (DD).
BB
CC
A
Attaching the casters
2
□ Be sure the drawers are locked and lay the cabinet (A)
□ emas eht no ,tinu eht ot )D( sretsac leviws eht hcattA
side as the handle, inserting bolts (AA) through the swivel
casters(D) and into the cabinet (A).
□ Tighten with a wrench (DD).
□ Repeat this process for the
opposite side of the cabinet (A).
□ Return the cabinet (A) to its upright position.
CAUTION:
Do not over tighten the bolts.
xed casters (C) on the
Maintenance
1
Caster maintenance
□ Grease the casters annually using high-quality
bearing grease.
5
2
Drawer maintenance
□ Lubricate the slides semi-annually.
Page 6
Operation
Removing the drawers
1
□ Fully extend the empty drawer.
□ elihw revel esaeler eno eht pu hsuP
pulling down on the other release lever.
□ Pull the drawer outward until it is released from the
drawer slide.
Re-inserting the drawers
2
□ Extend the drawer slides.
□ Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□ Once properly inserted, completely close the drawer
to set the slides
in their proper positions.
Care and Cleaning
□ Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and
water.
□
you would on a car.
□
6
Loading...