Stanley FLIP TOP TABLE F&C Assembly Instruction

CAREFULLY READ

AND UNDERSTAND ALL INSTRUCTIONS

BEFORE PROCEEDING!

FLIP TOP TABLE F&C

1. PREPARE FOR ASSEMBLY:

Two or more persons should turn the

TABLE TOP ASSEMBLY upside down onto Carpeted Floor or other padded surface (to prevent scratching or damage)

NOTE: Your furniture may have different design features than those shown in the drawing

CAUTION:

(2) OR MORE PERSONS

RECOMMENDED FOR ASSEMBLY !

2. ATTACHING LEGS & STREACHER

Assembly the legs onto table top ( see Picture )

Alligned the holes on leg with holes on table

top, to help assembly easy, insert the hardware

as provided but don't tighten up first until metal

stretcher is installed properly into legs. Once

everything in right location then start to tighten

up bolts with allen key ( See picture )

REF

PART DESCRIPTION

QTY

A B

C D

Allen Key

Allen Bolt

Lock Washer

Flat Washer

1 4 4 4

Screw 18

Specifications and Main Features