Stanley CLLi Instructions For Use Manual
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
LT
Please read these instructions before operating the product
CLLi
2 - Beam Self-Leveling Cross Line Laser
77-117
Self-Leveling
2
77-117
3
77-117
Carefully read the Safety Instructions and User Manual before using this product. The person
responsible for the instrument must ensure that all users understand and adhere to these
instructions.
Retain this manual for future reference.
IMPORTANT: The following labels are on your laser tool for your convenience and safety.
They indicate where the laser light is emitted by the level. ALWAYS BE AWARE of their
location when using the level.
DO NOT remove any warning label(s) on the housing. This instrument must only be used for
leveling and layout tasks as outlined in this manual.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the
dangers of looking directly into the laser tool.
DO NOT use in combination with other optical instruments. Do not modify the instrument, or
make manipulations or use in other applications than those described in the manual.
DO NOT look into the beam with optical aids, such as magnifiers, binoculars or Telescopes.
DO NOT stare into the laser beam or direct it towards other persons. Make sure the
instrument is not set at eye level. Eye protection is normally afforded by natural aversion
responses such as the blink reflex.
DO NOT direct the laser beam at other persons.
ALWAYS turn the laser tool “OFF” when not in use. Leaving the laser tool “ON” increases
the risk of someone inadvertently staring into the laser beam.
DO NOT operate the laser tool in combustible areas such as in the presence of flammable
liquids, gases or dust.
DO NOT disassemble the laser tool. There are no user serviceable parts inside.
Disassembling the laser will void all warranties on the product. Do not modify the product in
any way. Modifying the laser tool may result in hazardous laser radiation exposure.
DO NOT use this instrument in areas where a risk of explosion is present.
NOTE: Since the laser beam is of the focused type, ensure you check the beam’s path over
a relatively long distance and take all necessary precautions to ensure the beam cannot
interfere with other persons.
1. Safety
2. Product Description
3. Specifications
4. Operating Instructions
5. Calibration
6. Maintenance and Care
7. Warranty
User Safety
Safety
Contents
EN 60825-1
LA SE R RA DI ATI ON - DO N OT
STA RE I NT O BE AM O R VI EW
DI RE CT LY WI TH
OP TI CA L IN ST RU ME NT S
CL AS S 1 LA SE R PR OD UC T
MAX OU TPU T ≤ 1 m W @ 63 0 - 67 0 nm
4
77-117
5
77-117
WARNING: Batteries can explode or leak and can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time with new batteries
of the same brand and type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in fire.
ALWAYS keep batteries out of reach of children.
ALWAYS remove batteries if the device will not be used for several months.
NOTE: Ensure that the correct batteries as recommended are used.
NOTE: Ensure the batteries are inserted in the correct manner, with the correct polarity.
ROHS Compliant
EN 60825-1
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical
and electronic waste under the WEEE Directive.
Battery Safety
The Stanley Works declares that the CE Mark has been applied to
this product in accordance with the CE Marking Directive 93/68/
EEC.
This product conforms with EN60825-1:2007.
For further details please refer to www.stanleyworks.com.
End of Life
Declaration of Conformity
Product Description
Package Contents
1. Laser Unit
2. Tripod
3. L-Type Bracket
4. Pole Clamp (attaches to L-Type Bracket)
5. Magnetic Mount (attaches to L-Type Bracket)
6. Laser Target
7. Carrying Case
8. Batteries (3 x AA)
9. User Manual
6
77-117
7
77-117
1
2
5
4
6
3
1
2
Product Overview
1. Window for Cross Beam Laser
2. Transport Lock
3. Keyboard
4. Laser Warning Label
5. Battery Compartment Cover
Laser Unit
6. 1/4 - 20 Threaded Mount
1. 1/4 - 20 Screw Mount
2. Elevator Column
3. Adjustable Legs
Tripod
L-Type Bracket
Pole Clamp
Magnetic Mount
1. Keyhole Slots
2. 1/4 - 20 Screw Mount
1. Clamp
2. 3 Pin Key
1. Magnetic Strip
2. 3 Pin Key
3
2
1
1
2
1
2
Loading...