Stanley A-1251 95518-45 TALL HUTCH Assembly Instruction

NOTE: Your furniture may have different design features than those shown in the drawing.

95518-45 Tall Hutch

A-1251

LEVELING:

LEVEL
the Instructions provided.

the BASE according to

CAREFULLY READ AND

UNDERSTAND ALL

INSTRUCTIONS BEFORE

PROCEEDING!

BACK SIDE
HUTCH

1. LIFT HUTCH ONTO BASE:

Carefully lift the HUTCH onto the BASE
and align it.

MENDING

PLATES

2. ATTACH HUTCH TO BASE:

Align Back of the HUTCH with Back of the
BASE, center and secure with MENDING
PLATES and SCREWS, as shown.

NOTE: If a Power Screwdriver is used,

BACK SIDE
BASE

use a "low torque" setting.

REMOVABLE PARTITIONS

To install REMOVABLE PARTITIONS,

locate WIRE SUPPORTS in the Upper and
Lower Shelves. Align Grooves in the Top
and Bottom Edges of the PARTITIONS

with the WIRE SUPPORTS, and carefully
slide the PARTITIONS between the Upper
and Lower WIRE SUPPORTS (as shown
below).

UPPER
SHELF

CAUTION:

(2) OR MORE PERSONS

RECOMMENDED FOR

ASSEMBLY!

ADJUSTABLE SHELVES

To remove ADJUSTABLE SHELVES,
remove SCREWS from SHELF
SUPPORTS, then carefully lift
Shelves up and out of the Armoire.

To reposition ADJUSTABLE
SHELVES, insert Stem of SHELF
SUPPORTS into Holes as shown.
Rest the SHELF on the SHELF
SUPPORTS, and reinstall SCREWS.

WIRE

SUPPORTS

REMOVABLE

PARTITION

LOWER

SHELF

GROOVE

SCREW

SCREWDRIVER

SHELF SUPPORT