Stanley A-1250 95518-43 LATERAL FILE HUTCH Assembly Instruction

NOTE: Your furniture may have different design features than those shown in the drawing.

95518-43 Lateral File Hutch

A-1250

BACK SIDE
HUTCH

MENDING

PLATES

BACK SIDE
LATERAL FILE

LEVELING:

LEVEL
the Instructions provided.

the BASE according to

1. LIFT HUTCH ONTO LATERAL FILE:

Carefully lift the HUTCH onto the
LATERAL FILE and align it.

2. ATTACH HUTCH TO LATERAL FILE:

Align Back of the HUTCH with Back of the
LATERAL FILE, center and secure with
MENDING PLATES and SCREWS, as
shown.

NOTE: If a Power Screwdriver is used,
use a "low torque" setting.

CAREFULLY READ AND

UNDERSTAND ALL

INSTRUCTIONS BEFORE

PROCEEDING!

CAUTION:

(2) OR MORE PERSONS

RECOMMENDED FOR

ASSEMBLY!

REMOVABLE PARTITIONS

To install REMOVABLE PARTITIONS,

locate WIRE SUPPORTS in the Upper and
Lower Shelves. Align Grooves in the Top
and Bottom Edges of the PARTITIONS

with the WIRE SUPPORTS, and carefully
slide the PARTITIONS between the Upper
and Lower WIRE SUPPORTS (as shown
below).

UPPER
SHELF

WIRE

SUPPORTS

REMOVABLE

PARTITION

GROOVE

ADJUSTABLE SHELVES

To remove ADJUSTABLE SHELVES,
remove SCREWS from SHELF
SUPPORTS, then carefully lift Shelves
up and out of the Armoire.

To reposition ADJUSTABLE
SHELVES, insert Stem of SHELF
SUPPORTS into Holes as shown.
Rest the SHELF on the SHELF
SUPPORTS, and reinstall SCREWS.

SCREW

SCREWDRIVER

SHELF SUPPORT

LOWER

SHELF