Stanley A-1140 81611-11 CHINA Assembly Instruction

NOTE: Your furniture may have different design features than those shown in the drawing.

81611-11 CHINA

A-1140

CAREFULLY READ

Plug MALE LEAD from TOUCH SWITCH into FEMALE LEAD

AND UNDERSTAND ALL INSTRUCTIONS

BEFORE PROCEEDING!

1. ADJUSTABLE GLIDES

Adjustable Glides are located under the front corners of case as shown in the
drawing. Turn Adjustable Glide CLOCKWISE to lower case;
COUNTERCLOCKWISE to raise.

ADJUSTABLE GLIDES

PLATE

SHELF

GROOVE

Turn Clockwise to

110 Volt AC

ONLY!

Lower...

2. CONNECT POWER:

Connect Electric LIGHTS as shown...
from SWITCH BOX.

Plug POWER CORD (from SWITCH BOX) into a standard
110V AC outlet ONLY.

GROMMET

1 1/2" - Black

L.H. SIDE ONL

Y

3. INSTALL SHELF SUPPORTS:

Install END SHELF SUPPORTS by pushing Stems into predrilled Holes
located in END FRAMES, as shown at left.

Counterclockwise to
Raise...

FEMALE

LEAD

MALE

LEAD

SHELF

SHELF

4. INSTALL GLASS SHELVES:

Open Doors and CAREFULLY

END

FRAME

SHELF

angle SHELVES into position onto

SHELF SUPPORTS. Note that
PLATE GROOVES should be
located on the top surface of the
SHELVES, and near the back of
the China.

CENTER SHELF

SUPPORT

END SHELF

SUPPORT

HOLE

STEM

UPRIGHTS

Shelves should rest on Flat Surfaces of SHELF SUPPORTS, when installed.

Note: If a Power Screwdriver
is used, a "low torque" setting

is recommended!