StandDesk PRO Assembly Manual

PRO

ASSEMBLY MANUAL

Dual Motor Triple Segment Frame

XO-58-PB022017

CAUTION/INFORMATION

Make sure no obstacles

around you are in the desk’s

path. Make sure the desktop is

not touching any walls. Make

sure all cords are appropriate

length to accommodate the

change in height.

Keep children away from electric height-adjustable desks,

control units and handsets. There is a risk of injury and

electric shock.

!!

WARNING

!

Pinch Point

Keep hands and

fingers clear

!!

Keep all electrical components away from liquids.

Do not sit, stand, crawl, or lie on or under the StandDesk.

Do not place any object taller than 20” underneath the

StandDesk

Do not open any of the components - the Legs, Control Box,

or Handset. There is a danger of electric shock.

This product is designed with a duty cycle of 10%

(2 min. on, 18 min. off)

!!

!!

!!

!!

In the event of a power outage or if the power cord is

unplugged, a manual reset may be necessary.

This StandDesk is height adjustable so that it can be positioned at the most

ergonomically suitable height. Any other use is at your risk.

Under no circumstances does StandDesk accept warranty claims or liability claims

for damages caused from improper use or handling of the desk frame.

USE / LIABILITY

!

WATCH ASSEMBLY VIDEO

www.standdesk.co/pages/faq

CLICK ON

StandDesk Pro Assembly

HIGHLY RECOMMENDED

If you have the stickers, make sure their color and number

1

match up, like so.

PERFECT MATCH

Your desk might not have the sticker system to match up and
align parts. But not to worry, the assembly process is just the
same.

Now we’re ready to get familiar with all the pieces.

STICKER SYSTEM

TOOLS

TOOLS REQUIRED

4mm Hex Bit (Optional)Phillips Head Screwdriver Power Drill (Optional) Tape Measure

COMPONENTS

Legs Support Braces (x2) Middle Slats

Control Box Holder

Feet (x2)

Control Box

Standard HandsetStabilizing Foot Plates (x2)

HARDWARE

P1

P5

P9

P6 P7 P8

P2 P3 P4

Cable Management TrayPower Cords (x3) Crossbar

P10 P11

OPTIONAL UPGRADES

P12

(REPLACES STANDARD HANDSET IF ORDERED)

Memory Handset

H1 H7 H8 H9

M6x35 (x8)M6x25 (x4)M6x12 (x14)

Anti-slip Anti-slip Anti-slip

Allen Wrench

H3

H5 H6

H4

ST3.5x16 (x2)

Inserts (x2)Washers (x4)

ST4.8x16 (x6)

H2

M6x12 (x4)

No.

Component Name

P1

Legs

P2

Support Braces

P3

Middle Slat

Feet

P4

P5

Stabilizing Foot Plates

P6

Control Box Holder

P7

Control Box

P8

Standard Handset

P9

Power Cords

P6

P7

H9

Qty

2

2

1

2

2

1

1

1

3

P3

No.

Component Name

H2

M6 x 12 Bolts

H3

Inserts

H4

Washers

H5

ST 3.5 x 16 Screws

ST 4.8 x 16 Screws

H6

H7

M6 x 12 Anti-slip Bolts

H8

M6 x 25 Anti-slip Bolts

H9

M6 x 35 Anti-slip Bolts

Qty

4

2

4

2

6

14

4

8

P2

H7

P1

P9

Height Range

H7

H9

P5

P4

Specifications

23.5 in (60 cm) - 49.2 in (125 cm)

PARTS DIAGRAM

Base Width

Travel Speed

Weight Capacity

Duty Cycle

42 in (106 cm) - 52 in (132 cm)

1.3 in/sec (3.4 cm/sec)

400 lbs (181 kgs)

10% max. 2 mins on, 18 mins off

Soft start/stop

Adjustable leveling studs