Stamina Magnetic Recumbent 4825 Bike, 4825, 15-4825B Owner's Manual

Model#: 15-4825B

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.

When calling for parts or
service, please specify the
following number.

WA RNING

CAUTION:
Weight on this product should not exceed 300 lbs.

Owner's

Ma nual

2012, 02

2012 Stamina Products, Inc.

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

This Product is Distributed Exclusively by

TABLE OF CONTENTS

Safety Instructions 2
Before You Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Set Up Instructions 10
Operational Instructions 11
Storage 15

Maintenance 15
Conditioning Guidelines 16
Warm-up a nd Cool-Down 17
Product Parts Drawing 18
Parts List 19
Warranty 21
Notes 22
Fax/Mail Ordering Form 23

Page Page

SAFETY INSTRUCTIONS

2

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

Read all warnings posted on the Magnetic Recumbent 4825 Bike.
The Magnetic Recumbent 4825 Bike should only be used after a thorough review of the Owner's Manual.
We recommend that two people be available for assembly of this product.
Keep children away from the Magnetic Recumbent 4825 Bike. Do not allow children to use or play on the
Magnetic Recumbent 4825 Bike. Keep children a nd pets away from the M agnetic Recumbent 4825 Bike
when it is in use.
The M agnetic Recumbent 4825 Bike is not a freewheeling exercise bike; therefore, pedal speed should be
reduced in a controlled manner to prevent injury from spinning pedals.
Make sure the Magnetic Recumbent 4825 Bike is properly assembled and that all nuts and bolts are
tightened before use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the Magnetic Recumbent 4825 Bike on a solid level surface. Do not position the
Magnetic Recumbent 4825 Bike on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the M agnetic Recumbent 4825 Bike.
Adjust the LEVELING CAPS(50) on the REAR STABILIZER(4) so that the bike sits on the floor without rocking.
Before using, inspect the Magnetic Recumbent 4825 Bike for worn or loose components, and securely
tighten or replace any worn or loose components prior to use.
Before using, always check the REAR FRAME(3) to be sure it is secure. The ADJUSTMENT KNOB(45)
must be inserted into one of the holes in the REAR FRAME(3) and securely tightened.
Each user should adjust the seat per instructions on page 11.
Do not attempt to adjust the seat while you are on the Magnetic Recumbent 4825 Bike.
Consult a physician prior to commencing an exercise program and follow his/her recommendations in
developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop
and consult your physician.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and
train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the Magnetic Recumbent 4825 Bike.
Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross
training shoes that fit well, provide foot support, and feature non-skid rubber soles.
Be careful to maintain your balance while using, mounting, dismounting, or assembling the Magnetic
Recumbent 4825 Bike, loss of balance may result in a fall and serious bodily injury.
The Magnetic Recumbent 4825 Bike should not be used by persons weighing over 300 pounds.
The Magnetic Recumbent 4825 Bike should be used by only one person at a time.
Do not ride the Magnetic Recumbent 4825 Bike while standing up.
The Magnetic Recumbent 4825 Bike is for consumer use only. It is not for use in public or semipublic
facilities.

This product contains a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm.
Consult your physician bef ore starting this or a ny exercise program. This is espec ially i mporta nt
if you are over the age of 35, have never exercised before, are pregnant, or suffer from any
health problem. This product is for home use only. Do not use in institutional or commercial
application s. Failure to follow all warnings a nd instructions could result in serious injury or death.
To reduce the risk of serious injury, read the following Safety Instructions before using the

Magnetic Recumbent 4825 Bike.

3

THANK YOU FOR PURCHASING THE

Magnetic Recumbent 4825 Bike

To help you get started, we have pre-assembled most of your

Magnetic Recumbent 4825 Bike at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

CALL US FIRST

Customer Service

1(800) 375-7520

www.staminaproducts.com

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

BEFORE YOU BEGIN

4

Seat

Rear Stabilizer

Rear Frame

Wheel

Computer

Crank

Right Cover

Back Cushion

Leveling Cap

Back Support

Handrail

Adjustment Knob

Right Pedal

Tension Knob

Front
Stabilizer

Front Frame

Left Cover

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench

Allen Wrench (6mm)

Warning Label

Thank you f or choosing the M agnetic Recumbent
4825 Bike. We take great pride in producing this

quality product and hope it will provide many hours
of quality exercise to make you feel better , look better ,
and enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health. Too
often, our busy lifestyles limit our ti me and opportunity
to exercise. The Magnetic Recumbent 4825 Bike
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the

Magnetic Recumbent 4825 Bike.

Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your Magnetic Recumbent
4825 Bike, plea se do not return the product. Contact
us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central T ime) on Friday.
If you would like to contact us online, go to our
website at www .stamin aproducts.com a nd a ccess the
Customer Service section.
Be sure to have the na me and model number of the
product available when you contact us.

5

EQUIPMENT WARNING & NOTICE LABELS

This chart is provided to help identify the warning & notice labels on the Magnetic Recumbent 4825 Bike.
Please take a moment to familiarize yourself with all of the warning & notice labels.

Label is larger tha n actual size

WAR NING LABEL(78)

W1

61 Bolt, Round Head (M6 x 1 x 20mm) 8

6

71 Acorn Nut (M8 x 1.25) 6

76 Washer (M8) 4

77 Lock Washer (M8) 6

Part No. and Description Qty

55 Carriage Bolt (M8 x 1.25 x 45mm) 2
56 Carriage Bolt (M8 x 1.25 x 75mm) 4

57 Bolt, Button Head (M8 x 1.25 x 15mm) 5

75 Arc Washer (M8) 6

62 Screw, Round He ad (M5 x 0.8 x 15mm) 4

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the a ssembly process. Pla ce the washers or the
ends of the bolts or screws on the circles to check for the correct di ameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is mea sured from below the hea d to the end of the bolt or screw .
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

ASSEMBLY INSTRUCTIONS

STEP 2

Rotate the ADJUSTMENT KNOB(45) counterclockwise until the knob portion can be pulled. Pull the
ADJUSTMENT KNOB(45) a nd slide the REAR FRAME(3) backward. Lock the REAR FRAME(3) in position

by inserting the pin of the ADJUSTMENT KNOB(45) into one of the a djustment holes in the REAR FRAME(3),
then rotate the ADJUSTMENT KNOB(45) clockwise to lock the REAR FRAME(3) securely. Attach the

REAR ST ABILIZER(4), the one with the LEVELING CAPS(50), to the REAR FRAME(3) with CARRIAGE
BOLTS(M8x1.25x75mm)(56), ARC WASHERS(M8)(75), LOCK WASHERS(M8)(77), and ACORN
NUTS(M8x1.25)(71).
NOTE:

You can adjust the LEVELING CAPS(50) on the REAR STABILIZER(4) to keep the Recumbent
Bike stable.

7

STEP 1

Attach the FRONT ST ABILIZER(2), the short one with the WHEELS(49), to the front of the FRONT FRAME(1)
with CARRIAGE BOL TS(M8x1.25x75mm)(56), ARC W ASHERS(M8)(75), LOCK WASHERS(M8)(77), and

ACORN NUTS(M8x1.25)(71).

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce the m ba ck into the box. Do not dispose of the pa cking materi als
until a ssembly is completed. Read e a ch step carefully before beginning. If you are missing a part please call
our toll-free number for a ssistance 1-800-375-7520 or e-mail us at: customerservice@sta min aproducts.com