Stamina inSTRIDE CYCLE XL, inSTRIDE CYCLE XL 15-0120A Owner's Manual

W ARNING: Weight limit is not applicable if product is used properly. This unit

is not designed to support a user's weight. To reduce the risk of
serious injury, please read all safety instructions before using.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

SAFETY INSTRUCTIONS

Product May Vary
Slightly From Pictured.

Read this Owner's Ma nual and f ollow it carefully before using the inSTRIDE CYCLE XL.
Do not stand up on the inSTRIDE CYCLE XL.
Keep children away from the inSTRIDE CYCLE XL. Do not allow children to use or
play around the inSTRIDE CYCLE XL. Keep children and pets away from the
inSTRIDE CYCLE XL when it is in use.
Set up and operate the inSTRIDE CYCLE XL on a solid level surface or table. Do
not position the inSTRIDE CYCLE XL on loose rugs or uneven surfa ces.
Inspect the inSTRIDE CYCLE XL for damaged or loose components prior to use.
Tighten/repla ce any loose or worn components prior to using the inSTRIDE CYCLE XL.
The surface of the crank housing may become hot during use, so allow it to cool
before moving.
Consult a physicia n prior to commencing a n exercise progra m. If, at any ti me during
exercise, you feel faint, dizzy , or experience pain, stop and consult your physici an.
Always choose the workout which best fits your physical strength and flexibility
level. Know your limits and train within them. Always use common sense when
exercising.
Do not wear loose or dangling clothing while using the inSTRIDE CYCLE XL.
Never exercise with bare feet or socks. Always wear a ppropriate footwear.
The inSTRIDE CYCLE XL should be used by only one person at a time.
The inSTRIDE CYCLE XL is for consumer use only. It is not for use in public or
semipublic facilities.

Safety Instructions

Customer Service

Operation

Warranty

When calling for parts or

service, please specify the

following model number:

15 - 0120A

MADE IN CHINA

2009 Stamina Products, Inc.

This Product is Produced Exclusively by

2009, 12

2040 N. Alli ance, Springfield, MO 65803

Customer Service Number

1 [phone]

[e-mail]

www.staminaproducts.com

ASSEMBLY & OPERATIONAL INSTRUCTIONS

STEP 1:

STEP 2:
STEP 3:

NOTE:

2

Insert the STABILIZERS(2) into both ends of the MAIN FRAME(1) and secure
with BUTTON HEAD BOLTS(M8x1.25x12mm)(16) a nd ARC WASHERS(M8)(17).
DO NOT TIGHTEN COMPLETELY.
Adjust the ST AND CAPS(3), set the inSTRIDE CYCLE XL on the floor and tighten
the bolts.

Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).
Slide the TIMER(18) onto the plate on the MAIN FRAME(1).
There are two adjustment holes on ea ch side of the PEDAL STRAPS(12). Select

the adjustment holes which allow your feet to be easily removed from the
PEDALS(11).

The surface of the cra nk housing may become
hot during use, so allow it to cool before
moving. Read the cautions posted on the

inSTRIDE CYCLE XL.

CAUTION:

Caution Decal

(both sides)