Stamina Inmotions, Inmotions II Owner's Manual

45-1002

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

2005, 12

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.

When calling for parts or
service, please specify the
following number.

WA RNING

CAUTION:
Weight on this product should not exceed 250 lbs.

2040 N. Alliance, Springfield, MO 65803

Customer Service Number

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

Owner's
Manual

2005 Stamin a Products, Inc.

TABLE OF CONTENTS

SAFETY INSTRUCTIONS

To reduce the risk of serious injury, read the following Safety Instructions before
using the

InMotionTM II Treadmill.

WARNING:

Before starting any exercise or conditioning program you should consult with your personal
physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.

WARNING:

2

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

Read all warnings posted on the InMotion

TM

II Treadmill.

Read this Owner's Manual and follow it carefully before using the InMotionTM II Treadmill. Make
sure that it is properly assembled and tightened before use.
We recommend that two people be available for assembly of this product.
Keep children away from the InMotionTM II Treadmill. Do not allow children to use or play on the
InMotionTM II Treadmill. Keep children and pets away from the InMotionTM II T readmill when it is
in use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the InMotionTM II Tre admill on a solid level surface. Do not position the InMotion

TM

II Treadmill on loose rugs or uneven surfaces.

Inspect the InMotionTM II T rea dmill for worn or loose components prior to use. Tighten/re pla ce a ny
loose or worn components prior to using the InMotionTM II Treadmill.
Keep fingers clear of all pinch points when folding and unfolding the InMotionTM II Treadmill.
When folding the InMotionTM II Treadmill for storage, make sure that Base Frame Assembly is
locked securely in the folded position by the Spring Pin.
Consult a physician prior to commencing an exercise program. If, at any time during exercise, you
feel faint, dizzy, or experience pain, stop and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your
limits and train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the InMotionTM II Treadmill.
Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or
crosstraining shoes. Be sure that they fit well, provide foot support and fe ature non-skid rubber soles.
Be careful to maintain your balance while using, mounting, dismounting, or a ssembling the InMotion

TM

II Treadmill, loss of balance may result in a fall and serious bodily injury.

The InMotionTM II Treadmill should not be used by persons weighing over 250 pounds.
The InMotionTM II Treadmill should be used by only one person at a time.
The InMotionTM II Treadmill is for consumer use only. It is not for use in public or semipublic
facilities.

Safety Instructions 2
Before You Begin 4
Hardware Illustrations 5
Assembly Instructions 6
Using The Electronics Meter 8
Treadmill Adjustments 9

Maintenance 10
Storage 11
Product Parts Drawing 12
Parts List 13
Warranty 14
Fax/Mail Ordering Form 15

Page Page

THANK YOU FOR PURCHASING THE

InMotionTM II Treadmill

To help you get started, we have pre-assembled most of your

InMotionTM II Treadmill at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

Within a few minutes you will be getting your body into shape and on your

way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Friday, 8:00 A.M. - 5:00 P.M., Central Time.

CALL US FIRST

3

BEFORE YOU BEGIN

Thank you for choosing the InMotion

TM

II

Treadmill. We take great pride in producing this

quality product and hope it will provide many hours
of quality exercise to make you feel better , look better
and enjoy life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The

InMotionTM II

Tr eadmill provides a convenient and simple method

to begin your assault on getting your body in shape
and achieving a happier and healthier lifestyle.
Before reading further , ple ase review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the

InMotionTM II T readmill.

Although Stamina tries to manufa cture its products
with the finest materials and uses the highest
standards of ma nufacturing, occasionally a part that
does not fit, is the incorrect size, or is otherwise
inappropriate is found. Even with the highest
inspection and quality controls in place these things
will happen occasionally. Please do not return the
product. For your convenience, Stamina has a
Customer Service Department with a toll-free
number. If a part is missing, does not fit, is the
incorrect size, or is otherwise inappropriate, please
call 1 [phone] (in the U.S.) between 8:00 A.M.
and 5:00 P.M. Central T ime, Monday through Friday .
Our operators will be able to assist you with your
problem and the parts will be mailed directly to your
house.

4

THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : Wrench

Allen Wrench (4mm)

Meter

Right Upright

Moving Wheel

Upright Support

Side Molding

Walking Belt

Base Frame

U-Shaped Handrail

Left Upright

Spring Pin

Flywheel

Adjustment
Bracket

Bumper Stand

5

Part No. and Description Qty

HARDWARE IDENTIFICATION CHAT

Place washers, the end of bolts or screws on the circles to check for the
correct size. Use the small scale to check the sizes of bolts and screws.

This chart is provided to help identify the hardware used in the assembly process.

After unpacking the unit, open the hardware bag and make sure that you have the following items:

length

length

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

NOTICE: The length of all kinds of screws and bolts are not included

themselves head, except the flat head screws and bolts.

1. Some of the hardware items listed may be attached to other parts.

2. Bolt length is measured from the bottom of the bolt head to the end of the bolt.

NOTE:

38 Bolt, Hex Head (M10 x 1.5 x 20mm) 4

39 Bolt, Hex Head (M12 x 1.75 x 70mm) 2

40 Bolt, Button Head (M6 x 1 x 15mm) 2

44 Arc Washer (M6) 2

47 Washer (M10) 4
48 Washer (M12) 2