Stamina fusion 15-7250 Owner's Manual

Model#: 15-7250

ST AMINA PRODUCTS

MADE IN CHINA

Product May V ary Slightly

From Pictured.

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts a nd
nuts are tightened prior to
each use. Follow all safety
instructions in this manual.

When calling for parts or
service, please specify the
following number

:

WA R NING

CAUTION:
Weight on this product should not exceed 300 lbs.

Owner's

Ma nual

2008, 08

2008 Stamin a Products, Inc.

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

T ABLE OF CONTENTS

Safety Instructions 2
Before You Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Set Up Instructions 13
Operational Instructions 14
Computer Instructions 15

Storage 20
Maintenance 20
Conditioning Guidelines 21
Warm-up and Cool-Down 22
Warranty 23
Product Parts Drawing 24
Parts List 25
Fax/Mail Ordering Form 27

Page Page

SAFETY INSTRUCTIONS

To reduce the risk of serious injury, read the following Safety Instructions before
using the Magnetic Fusion 7250 Bike.

WARNING:

2

Before starting any exercise or conditioning program you should consult with your personal
physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

Read all warnings posted on the Magnetic Fusion 7250 Bike.
The Magnetic Fusion 7250 Bike should only be used after a thorough review of the Owner's Manual.
We re commend that two people be availa ble f or assembly of this product.
Keep children away from the Magnetic Fusion 7250 Bike. Do not allow children to use or play on the Magnetic
Fusion 7250 Bike. Keep children and pets away from the M agnetic Fusion 7250 Bike when it is in use.
The M agnetic Fusion 7250 Bike is not a freewheeling exercise bike; therefore, pedal speed should be reduced
in a controlled manner to prevent injury from spinning pedals.
Make sure the Magnetic Fusion 7250 Bike is properly assembled and that all nuts and bolts are tightened
before use.
It is recommended that you place this exercise equi pment on an equipment mat.
Set up and operate the Magnetic Fusion 7250 Bike on a solid level surface. Do not position the Magnetic
Fusion 7250 Bike on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the Magnetic Fusion 7250 Bike.
Adjust the FOOT ST ANDS (64) and ST AND(68) s o that the M agnetic Fusion 7250 Bike sits on the floor without
rocking. See page 13 for detailed leveling instructions.
Before using, inspect the M agnetic Fusion 7250 Bike for worn or loose components, a nd tighten or replace
any loose or worn components prior to use.
Before using, always check the SEAT CARRIAGE(7) to be sure it is secure. The ADJUSTMENT KNOB(49)
must be inserted into one of the holes in the REAR FRAME(5) and tightened.
Each user should a djust the seat per in structions on page 14.
Do not attempt to adjust the seat while you are on the Magnetic Fusion 7250 Bike.
Consult a physicia n prior to commencing an exercise progra m and follow his/her re commendations in developing
your fitness progra m. If at a ny time during exercise you feel faint, dizzy, or experience pain, stop and consult
your physician.
Follow your physician's recommendation s in developing your own personal f itness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your li mits and train
within them. Always use common sen se when exercising.
Do not wear loose or dangling clothing while using the Magnetic Fusion 7250 Bike.
Never exercise in bare feet or socks; always wear proper footwear such a s running, wal king, or cross training
shoes that fit well, provide foot support, and feature non-skid rubber soles.
Care should be taken in mounting or dismounting the Magnetic Fusion 7250 Bike.
The Magnetic Fusion 7250 Bike should not be used by person s weighing over 300 pounds.
The Magnetic Fusion 7250 Bike should be used by only one person at a time.
Do not ride the Magnetic Fusion 7250 Bike while standing up.
The Magnetic Fusion 7250 Bike is for consumer use only. It is not for use in public or semipublic facilitie s.

THANK YOU FOR PURCHASING THE

Magnetic Fusion 7250 Bike

To help you get started, we have pre-assembled most of your

Magnetic Fusion 7250 Bike at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into sha pe

and be on your way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

CALL US FIRST

Customer Service

1(800) 375-7520

www.staminaproducts.com

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

A TT N: Customer Service

P .O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

3

BEFORE YOU BEGIN

4

Seat

Foot Cap

Right Crank

Right Cover

Back Cushion

Foot Cap

Seat Frame

Seat Carriage

Right Pedal

Left Pedal

Upright Sleeve

Front Frame

Computer

Warning Label

Thank you f or choosing the Magnetic Fusion 7250
Bike. We take great pride in producing this quality

product and hope it will provide ma ny hours of quality
exercise to make you feel better, look better, and
enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health. Too
often, our busy lifestyles limit our ti me and opportunity
to exercise. The Magnetic Fusion 7250 Bike
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the

Magnetic Fusion 7250 Bike.

Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your Magnetic Fusion 7250
Bike, please do not return the product. Contact us
FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P.M. (Central Time) Monday through
Thursday and 8:00 A.M. to 3:00 P.M. (Central Time)
on Friday.
If you would like to contact us online, go to our
website at www .stamin aproducts.com a nd a ccess the
Customer Service section.
Be sure to have the name and model number of
the product available when you contact us.

Upright

Rear Covers

Adapter

Seat Rail

Left Pedal Strap

Handrail

Water Bottle

Handlebar

Pulse Sensor

Foot Cap

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :

Allen Wrench (5mm)
Allen Wrench (6mm)
Multi-opening Wrench

EQUIPMENT WARNING & NOTICE LABELS

This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 7250 Bike.
Please take a moment to familiarize yourself with all of the warning & notice labels.

Label is larger than actual size

WAR NING LABEL(109)

W1

5

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the a ssembly process. Pla ce the washers or the
ends of the bolts or screws on the circles to check for the correct di ameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is mea sured from below the hea d to the end of the bolt or screw .
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

66

Part No. and Description Qty

103 Washer (M8) 4

76 Bolt, Button Hea d (M10 x 1.5 x 200mm) 2

70 Bolt, Button Hea d (M8 x 1.25 x 40mm) 1
71 Bolt, Button Hea d (M8 x 1.25 x 45mm) 2
72 Bolt, Button Hea d (M8 x 1.25 x 53mm) 4
75 Bolt, Button Hea d (M10 x 1.5 x 53mm) 3

78 Bolt, Flat Hea d (M6 x 1 x 12mm) 2

82 Bolt, Round Head (M6 x 1 x 38mm) 8

85 Screw, Round He a d (M4 x 0.7 x 15mm) 10
86 Screw, Round He a d (M5 x 0.8 x 15mm) 4

97 Acorn Nut (M10 x 1.5) 2

98 Arc Washer (M8) 2
99 Arc Washer (M10) 8

100 Lock Washer (M8) 6
101 Lock Washer (M10) 9

79 Bolt, Flat Hea d (M8 x 1.25 x 15mm) 6

74 Bolt, Button Hea d (M10 x 1.5 x 20mm) 4

ASSEMBLY INSTRUCTIONS

7

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce the m ba ck into the box. Do not dispose of the pa cking materi als
until a ssembly is completed. Read e a ch step carefully before beginning. If you are missing a part please call
our toll-free number for a ssistance 1-800-375-7520 or e-mail us at customerservice@sta min a products.com.

STEP 1

Make the WHEEL(62) on the FRONT ST ABILIZER(2) fa ce the front, then atta ch the FRONT ST ABILIZER(2)
to the FRONT FRAME(1) with BUTTON HEAD BOL TS(M8x1.25x53mm)(72), LOCK WASHERS(M8)(100),
and WASHERS(M8)(103).

STEP 2

Slide the FOOT CAPS(63) onto both ends of the FRONT STABILIZER(2) so they fit over the edges of the
LEFT and RIGHT COVERS(33, 34) a nd secure with ROUND HEAD SCREWS(M4x0.7x15mm)(85). Screw
the FOOT STANDS(64) all the way up into the FRONT STABILIZER(2) on both sides.

8

ASSEMBLY INSTRUCTIONS

STEP 3

Attach the REAR ST ABILIZER(6) to the REAR FRAME(5) with BUTT ON HEAD BOL TS(M8x1.25x53mm)
(72), LOCK W ASHERS(M8)(100), and WASHERS(M8)(103).

STEP 4

Slide the FOOT CAPS(63) onto both ends of the REAR STABILIZER(6) so they fit over the edges of the
LEFT and RIGHT REAR COVERS(65, 66) and se cure with ROUND HEAD SCREWS(M4x0.7x15mm)(85).

Screw the FOOT STANDS(64) all the way up into the REAR STABILIZER(6) on both sides.

STEP 5

Screw the STAND(68) all the way up into the bottom of the FRONT FRAME(1). Connect the PULSE

EXTENSION WIRE(43) to the CONTROL WIRE(25). Insert the FRONT FRAME(1) into the REAR FRAME(5)
and se cure with BUTTON HEAD BOL TS(M10x1.5x20mm)(74), BUTTON HEAD BOL TS(M10x1.5x53mm)
(75), ARC WASHERS(M10)(99), and LOCK WASHERS(M10)(101). Press the COVER PLUGS(67) into
the holes in the LEFT and RIGHT REAR COVERS(65, 66).
NOTE: See page 13 for detailed leveling instructions to prevent rocking.

Rear Frame(5), is

inside of Rear

Covers(65, 66)

9

ASSEMBLY INSTRUCTIONS

To attach the HANDRAIL(9), position the HANDRAIL(9) under the SEAT CARRIAGE(7) as shown in the
above illustration and secure with BUTTON HEAD BOLTS(M8x1.25x45mm)(71), ARC WASHERS(M8)

(98), and LOCK WASHERS(M8)(100).

STEP 8

Refer to the inset drawing. Plug the PULSE SENSOR WIRE(55) into the SOCKET of the PULSE EXTENSION
WIRE(43) located on the SEAT RAIL(45).

STEP 7

NOTE:

The PULSE SENSOR WIRES(55) go through the tube of the HANDRAIL(9). Be careful not to
damage the wires when inserting the BUTTON HEAD BOLTS(M8x1.25x45mm)(71) through the
holes in the HANDRAIL(9) when attaching it to the SEA T CARRIAGE(7).

Socket of Pulse
Extension Wire(43)

STEP 6

Attach the SEA T FRAME(8) to the SEA T CARRIAGE(7) with BUTTON HEAD BOL TS(M10x1.5x200mm)(76),
WASHERS(M10)(99), LOCK WASHERS(M10)(101), and ACORN NUTS(M10x1.5)(97).