Stamina Folding Recumbent Bike 15-0200A, INTONE 15-0200A Owner's Manual

Owner's Manual

Model#: 15-0200A

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts a nd
nuts are tightened prior to
each use. Follow all safety
instructions in this manual.

When calling for parts or
service, please specify the
following number

:

WA RNING

CAUTION:
Weight on this product should not exceed 250 lbs.

2008, 09

2008 Stamina Products, Inc.

2040 N. Alliance, Springf ield, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

TABLE OF CONTENTS

Before starting any exercise or conditioning program you should con sult with your personal
physicia n to see if you require a complete physical exam. This is espe cially i mportant if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.

WARNING:

2

SAFETY INSTRUCTIONS

WARNING:

Read all warnings posted on the INTONE Folding Recumbent Bike.
The INTONE Folding Recumbent Bike should only be used after a thorough review of the Owner's Manual.
We recommend that two people be available for assembly of this product.
Keep children away from the INTONE Folding Recumbent Bike. Do not allow children to use or play on
the INTONE Folding Recumbent Bike. Keep children and pets away from the INTONE Folding
Recumbent Bike when it is in use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the INTONE Folding Recumbent Bike on a solid level surface. Do not position the
INTONE Folding Recumbent Bike on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the INTONE Folding Recumbent

Bike.

Adjust the Leveling Caps(50) on the Re ar Sta bilizer(3) so that the INTONE Folding Recumbent Bike sits
on the floor without rocking.
Inspect the INTONE Folding Recumbent Bike for worn or loose components prior to use. T ighten/replace
any worn or loose components prior to using the INTONE Folding Recumbent Bike.
Each user should adjust the seat per instructions on page 11.
Make sure the Seat Frame(5) is locked properly by the Adjustment Knob(41) located on the Main Frame(1).
Make sure the Ba ck Support(6) is locked properly by the Pegs on the Seat Fra me(5) and the Locking Knob(45).
Make sure the Rear Frame(2) is locked properly by the Pull Pin(47) when in storage.
Keep fingers clear of all pinch points when folding and unfolding the INTONE Folding Recumbent Bike.
Consult a physician prior to commencing an exercise program. If at any time during exercise you feel faint,
dizzy, or experience pain, stop and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and
train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the INTONE Folding Recumbent Bike.
Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross
training shoes that fit well, provide foot support, and feature non-skid rubber soles.
Be careful to maintain your balance while using, mounting, dismounting, or a ssembling the INTONE Folding
Recumbent Bike; loss of balance may result in a fall and serious bodily injury.
The INTONE Folding Recumbent Bike should not be used by persons weighing over 250 pounds.
The INTONE Folding Recumbent Bike should be used by only one person at a time.
The INTONE Folding Recumbent Bike is for consumer use only. It is not for use in public or semipublic
facilities.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

Safety Instructions 2
Before Y ou Begin 4
Hardware Identification Chart 5
Assembly Instructions 6
Set Up Instructions 9
Operational Instructions 10
Maintenance 11

Storage 12
Conditioning Guidelines 13
Warm-Up a nd Cool-Down 14
Warranty 15
Product Parts Drawing 16
Parts List 17
Fax/Mail Ordering Form 19

Page Page

To reduce the risk of serious injury, read the following Safety Instructions before
using the INTONE

Folding Recumbent Bike.

3

THANK YOU FOR PURCHASING THE

STAMINA INTONE Folding Recumbent Bike

To help you get started, we have pre-assembled most of your

INTONE Folding Recumbent Bike at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

CALL US FIRST

Customer Service

1(800) 375-7520

www.staminaproducts.com

4

Seat Frame

THE FOLLOWING TOOL IS INCLUDED FOR ASSEMBLY :

Left Cover

Rear Frame

Front Stabilizer

Right

Cover
Crank

Endcap

Left Pedal

Handrail

Rear Stabilizer

Adjustment Knob

Meter

Tension Knob

Seat

Leveling Cap

Back Support

Back Cushion

Moving Wheels

Combination Wrench

BEFORE YOU BEGIN

Right Pedal

Main Frame

Thank you for choosing the INTONE Folding
Recumbent Bike. W e take great pride in producing

this quality product and hope it will provide many
hours of quality exercise to make you feel better , look
better, and enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health. Too
often, our busy lifestyles limit our ti me and opportunity

to exercise. The INTONE

Folding Recumbent

Bike provides a convenient and simple method to

begin your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and fa mili arize yoursel f with the parts that are
labeled.
Read this manual carefully before using the

INTONE

Folding Recumbent Bike.

Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with

the parts included with your INTONE

Folding

Recumbent Bike, plea se do not return the product.

Contact us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central T i me) on Friday.
If you would like to contact us online, go to our
website at www.sta mina products.com a nd a ccess the
Customer Service section.
Be sure to have the na me and model number of the
product available when you contact us.

5

Part No. and Description Qty

56 Carriage Bolt (M8 x 1.25 x 60mm) 4
57 Carriage Bolt (M8 x 1.25 x 85mm) 1

64 Bolt, Hex Head (M8 x 1.25 x 20mm) 4
65 Bolt, Hex Head (M8 x 1.25 x 40mm) 2

69 Acorn Nut (M8 x 1.25) 4

74 Arc Washer (M8) 6

75 Washer (M8) 5

60 Screw, Round He ad (M5 x 0.8 x 10mm) 2

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the a ssembly process. Pla ce the washers or the
ends of the bolts or screws on the circles to check for the correct di ameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is mea sured from below the hea d to the end of the bolt or screw .
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

STEP 1

The FRONT STABILIZER(4) has two MOVING WHEELS(48) with an "R" decal on one end. Attach the
FRONT ST ABILIZER(4) to the MAIN FRAME(1) with the wheels facing front and the "R" decal at the right
side as shown in the illustration. Secure with the CARRIAGE BOLTS(M8x1.25x60mm)(56), ARC
WASHERS(M8)(74), a nd ACOR N NUTS(M8x1.25)(69).

STEP 2

Attach the REAR ST ABILIZER(3) to the REAR FRAME(2) with CARRIAGE BOL TS(M8x1.25x60mm)(56),
ARC WASHERS(M8)(74), a nd ACOR N NUTS(M8x1.25)(69).
NOTE:

R

6

ASSEMBLY INSTRUCTIONS

You can adjust the LEVELING CAPS(50) on the REAR STABILIZER(3) to keep the INTONE
Folding Recumbent Bike stable.

Nylock Nut(M8)

Plastic Washer

Fixing Tube

NOTE: Remove the FIXING TUBES, W ASHERS, and NUTS from MAIN FRAME(1) and REAR FRAME(2)

before any a ssembly . These parts are only f or packing, do not dispose of the packing materi als
until assembly is completed.

STEP 3

Store the PULL PIN(47) by inserting the pin into the hole in the REAR FRAME(2).

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce the m ba ck into the box. Do not dispose of the pa cking materi als
until a ssembly is completed. Read e a ch step carefully before beginning. If you are missing a part please call
our toll-free number for a ssistance 1-800-375-7520 or e-mail us at customerservice@sta min a products.com.