Stamina CPS 9200 Indoor Cycle 15-9200, CPS 9200, 15-9200 Owner's Manual

Model#: 15-9200

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts a nd
nuts are tightened prior to
each use. Follow all safety
instructions in this manual.

When calling for parts or
service, please specify the
following number

:

WA RNING

CAUTION:
Weight on this product should not exceed 300 lbs.

Owner's

Ma nual

2008, 08

2008 Stamina Products, Inc.

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

TABLE OF CONTENTS

Safety Instructions 2
Before You Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Set Up Instructions 10
Operational Instructions 11
Storage 13

Maintenance 13
Conditioning Guidelines 14
Warm-Up a nd Cool-Down 15
Product Parts Drawing 16
Parts List 17
Warranty 19
Notes 20
Fax/Mail Ordering Form 22

Page Page

SAFETY INSTRUCTIONS

To reduce the risk of serious injury, read the following Safety Instructions before
using the CPS 9200 Indoor Cycle.

WARNING:

2

Before starting any exercise or conditioning program you should consult with your personal
physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

Read all warnings posted on the CPS 9200 Indoor Cycle.
The CPS 9200 Indoor Cycle should only be used after a thorough review of the Owner's Manual.
We recommend that two people be available for assembly of this product.
Keep children away from the CPS 9200 Indoor Cycle. Do not allow children to use or play on the CPS 9200
Indoor Cycle. Keep children and pets away from the CPS 9200 Indoor Cycle when it is in use.
The CPS 9200 Indoor Cycle is not a freewheeling exercise bike; therefore, pedal speed should be reduced
in a controlled manner to prevent injury from spinning pedals.
Make sure the CPS 9200 Indoor Cycle is properly assembled and that all nuts and bolts are tightened
before use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the CPS 9200 Indoor Cycle on a solid level surface. Do not position the CPS 9200
Indoor Cycle on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the CPS 9200 Indoor Cycle.
Adjust the STANDS(51) under the FRONT a nd REAR ST ABILIZERS(3, 4) so that the CPS 9200 Indoor Cycle
sits on the floor without rocking. See page 13 for detailed leveling instructions.
Before using, inspect CPS 9200 Indoor Cycle for worn or loose components, and tighten or replace any
worn or loose components prior to use.
Before getting on the CPS 9200 Indoor Cycle, always check the SEAT POST(5), SEAT SLIDER(6),
PEDALS(16, 17), and HANDLEBAR(2) to be sure they are secure. The ADJUSTMENT KNOBS(48) must be
inserted into one of the holes in the SEAT POST(5) and the HANDLEBAR(2) and tightened.
Each user should adjust the seat per instructions on page 11 .
Do not attempt to adjust the seat while you are on the CPS 9200 Indoor Cycle.
Consult a physician prior to commencing an exercise program and follow his/her recommendations in
developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop
and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and
train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the CPS 9200 Indoor Cycle.
Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross
training shoes that fit well, provide foot support, and feature non-skid rubber soles.
Care should be taken in mounting or dismounting the CPS 9200 Indoor Cycle.
The CPS 9200 Indoor Cycle should not be used by persons weighing over 300 pounds.
The CPS 9200 Indoor Cycle should be used by only one person at a time.
The CPS 9200 Indoor Cycle is for consumer use only. It is not for use in public or semipublic facilities.

3

THANK YOU FOR PURCHASING THE

CPS 9200 Indoor Cycle

To help you get started, we have pre-assembled most of your

CPS 9200 Indoor Cycle at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

CALL US FIRST

Customer Service

1(800) 375-7520

www.staminaproducts.com

BEFORE YOU BEGIN

4

Seat

Rear Stabilizer

Wheel

Handlebar

Right Crank

Flywheel

Seat Slider

Seat Post

Chain Guard

Adjustment Knob

Right Pedal

Water
Bottle

Front Stabilizer

Main Fra me

Tension Knob

Warning Label

Thank you for choosing the CPS 9200 Indoor
Cycle. We take great pride in producing this quality

product and hope it will provide ma ny hours of quality
exercise to make you feel better, look better, and
enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health. Too
often, our busy lifestyles limit our ti me and opportunity
to exercise. The CPS 9200 Indoor Cycle provides a
convenient and simple method to begin your assault
on getting your body in shape a nd a chieving a happier
and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the CPS

9200 Indoor Cycle.

Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your CPS 9200 Indoor Cycle,
plea se do not return the product. Conta ct us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central T i me) on Friday.
If you would like to contact us online, go to our
website at www .stamin aproducts.com a nd a ccess the
Customer Service section.
Be sure to have the na me and model number of the
product available when you contact us.

Stand

THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : Wrench

Allen Wrench (5mm)

5

EQUIPMENT WARNING & NOTICE LABELS

This chart is provided to help identify the warning & notice labels on the CPS 9200 Indoor Cycle. Please
take a moment to familiarize yourself with all of the warning & notice labels.

Label is larger tha n actual size

WAR NING LABEL(70)

W1

6

69 Washer (M8) 4

Part No. and Description Qty

55 Bolt, Button Head (M8 x 1.25 x 15mm) 4

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the a ssembly process. Pla ce the washers or the
ends of the bolts or screws on the circles to check for the correct di ameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is mea sured from below the hea d to the end of the bolt or screw .
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce the m ba ck into the box. Do not dispose of the pa cking materi als
until a ssembly is completed. Read e a ch step carefully before beginning. If you are missing a part please call
our toll-free number for a ssistance 1-800-375-7520 or e-mail us at customerservice@sta min a products.com.

ASSEMBLY INSTRUCTIONS

7

STEP 1

Make the WHEELS(49) on the FRONT ST ABILIZER(3) fa ce the front, then attach the FRONT ST ABILIZER(3)
to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x15mm)(55) and WASHERS(M8)(69).

STEP 2

Attach the REAR ST ABILIZER(4) to the MAIN FRAME(1) with BUTT ON HEAD BOLTS(M8x1.25x15mm)(55)
and WASHERS(M8)(69).
NOTE: See page 10 for detailed leveling instructions to prevent rocking.