Stamina 9161, 55-9161 Owner's Manual

When calling for parts or

service, please specify

the following number

:

Model#: 55-9161

CAUTION:
Weight on this product should not exceed 250 lbs.

Owner's

Manual

This Product is Distributed Exclusively by

2040 N. Alliance, Springeld, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

Product May Vary Slightly From Pictured.

STAMINA PRODUCTS

MADE IN TAIWAN

©

2012 Stamina Products, Inc.

2012, 02

U.S. PATENT PENDING

Exercise can present a
h e a l t h r i sk . Co n su l t a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
dis c o n t i n ue use of this
equipment. Serious bodily
in j u r y c a n occ u r if th is
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all in str uct ion s a re not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.

!

WARNING

9161

TABLE OF CONTENTS

Safety Instructions ...................................... 2

Before You Begin ........................................ 4

Equipment Warning, Caution & Notice Labels ... 5

Hardware Identication Chart .................... 6

Assembly Instructions ................................ 7

Operational Instructions ........................... 13

Maintenance ............................................... 15

Storage ....................................................... 16

Conditioning Guidelines ........................... 17

Warm-Up and Cool-Down ......................... 18

Warranty ..................................................... 19

Product Parts Drawing .............................. 20

Parts List .................................................... 21

Notes ........................................................... 22

Fax/Mail Ordering Form ............................ 23

SAFETY INSTRUCTIONS

2

1. Read all warnings and cautions posted on the Stamina® 9161.

2. The Stamina® 9161 should only be used after a thorough review of the Owner’s Manual.

3. We recommend that two people be available for assembly of this product.

4. Keep children away from the Stamina® 9161. Do not allow children to use or play on the

Stamina® 9161. Keep children and pets away from the Stamina® 9161 when it is in use.

5. It is recommended that you place this exercise equipment on an equipment mat.

6. Set up and operate the Stamina® 9161 on a solid level surface. Do not position the Stamina®

9161 on loose rugs or uneven surfaces.

7. Make sure that adequate space is available for access to and around the Stamina® 9161.

8. Before using, inspect the Stamina® 9161 for worn or loose components, and securely tighten or

replace any worn or loose components prior to use.

9. C o nsult a p h y s i c i a n prior to co m m encing an ex e r c ise progr a m an d follow h i s / h e r

recommendations in developing your tness program. If at any time during exercise you feel faint,

dizzy, or experience pain, stop and consult your physician.

10. Always choose the workout which best ts your physical strength and exibility level. Know your

limits and train within them. Always use common sense when exercising.

11. Do not wear loose or dangling clothing while using the Stamina® 9161.

12. Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or

cross training shoes that t well, provide foot support, and feature non-skid rubber soles.

13. Be careful to maintain your balance while using, mounting, dismounting, or assembling the

Stamina® 9161, loss of balance may result in a fall and bodily injury.

14. The Stamina® 9161 should not be used by persons weighing over 250 pounds.

15. The Stamina® 9161 should be used by only one person at a time.

16. The Stamina® 9161 is for consumer use only. It is not for use in public or semipublic facilities.

!

WARNING

This product contains a chemical known to the State of California to cause
cancer and birth defects or other reproductive harm.
Consult your physician before starting this or any exercise program. This is

especially important if you are over the age of 35, have never exercised before,

are pregnant, or suffer from any health problem. This product is for home use
only. Do not use in institutional or commercial applications. Failure to follow
all warnings and instructions could result in serious injury or death.
To reduce the risk of serious injury, read the following Safety Instructions
before using the Stamina® 9161.

!

WARNING

!

WARNING

3

To help you get started, we have pre-assembled most of your

Stamina® 9161 at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any questions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springeld, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

To enact your warranty, please register your product

by going to register.staminaproducts.com

Call Us First

www.staminaproducts.com

1 [phone]

Customer Service

THANK YOU FOR PURCHASING THE

Stamina® 9161

Rear Support

Left Pedal Arm

Joint Cover

Right Handlebar

Right Rear Swing Arm

Upright

Joint Cover

Endcap

Left Front Swing Arm

Right Pedal Cap

Left Handlebar

Front Frame

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Allen Wrench (5mm)

Wrench

Thank you for choosing the Stamina® 9161. We

take great pride in producing this quality product
and hope it will provide many hours of quality
exercise to make you feel better, look better, and
enjoy life to its fullest.

It's a proven fact that a regular exercise program
can improve your physical and mental health.
Too often, our busy lifestyles limit our time and
opport unity t o exerc ise. The S tamina® 9161
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.

Befor e r e ading fu r t h er, p lease rev i e w the
drawing below and familiarize yourself with the
parts that are labeled.

Read this manual carefully before using the

Stamina® 9161.

BEFORE YOU BEGIN

Although Stamina constructs its products with

the nest materials and uses the highest standards

of manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
th e parts include d with your Stamina® 9161,
please do not retu rn the prod uct. Con tact us
FIRST!

If a part is missing or defective, please go to

staminaproducts.com to the Services section and

order the part needed, or call us toll free at 1-800­375-7520 (in the U.S.). Our Customer Service Staff

is available to assist you from 7:30 A.M. to 5:00 P.M.

(Central Time) Monday through Thursday and 8:00
A.M. to 3:00 P.M. (Central Time) on Friday.

Be sure to have the name and model number of

the product available when you contact us.

4

Warning Label

Endcap

Meter

Joint Plate

Endcap

Left Rear Swing Arm

Left Pedal Cap

This chart is provided to help identify the warning, caution, and notice labels on the Stamina® 9161.
Please take a moment to familiarize yourself with all of the warning, caution, and notice labels.

EQUIPMENT WARNING, CAUTION & NOTICE LABELS

Label is larger than actual size

5

WARNING LABEL(51)W1

34 Bolt, Button Head (M8 x 1.25 x 45mm) 1
35 Bolt, Button Head (M8 x 1.25 x 35mm) 10

49 Lock Washer (M8) 2

Part Number and Description Qty

32 Bolt, Button Head (M10 x 1.5 x 70mm) 1
33 Bolt, Button Head (M8 x 1.25 x 73mm) 2

46 Arc Washer (M8) 4

36 Bolt, Button Head (M8 x 1.25 x 14mm) 4

6

length

length

mm.

in.

INCHES

This chart is provided to help identify the hardware used in the assembly process. Place the washers or

the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to

check the length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat

heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

MILLIMETERS

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6

6 8 10 12

3/16" 1/4" 5/16" 3/8" 1/2"

HARDWARE IDENTIFICATION CHART

42 Nylock Nut (M10 x 1.5) 1
43 Nylock Nut (M8 x 1.25) 2

ASSEMBLY INSTRUCTIONS

STEP 1

Remove and discard the Protection Plug which is inserted in the
end of the UPRIGHT(1).

7

Place all parts from the box in a cleared area and position them on the oor in front of you. Remove

all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,

e-mail us at [e-mail], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.

STEP 2

Remove and discard the Protection Plugs which are inserted in
both ends of the FRONT FRAME(3).

NOTE: The Protection Plugs are used only for protection during

shipment and can be discarded after assembly.

Protection Plug

Protection Plug

Protection Plug

ASSEMBLY INSTRUCTIONS

8

STEP 3

Refer to the position of the REAR SUPPORT(2) in the above
illustration. Insert the REAR SUPPORT(2) into the UPRIGHT(1)
and secure with two BUTTON HEAD BOLTS(M8x1.25x14mm)
(36) and two ARC WASHERS(M8)(46) from the top side.

STEP 4

Turn the UPRIGHT ASSEMBLY(1, 2) over. Secure the REAR
SUPPORT(2) to t he UPRIGHT(1) with two BUTTON HEAD
BOLTS(M8x1.25x14mm)(36) and two ARC WASHERS(M8)(46).

STEP 5

For add itional security, ti ghte n th e BU TTO N HE AD B OLT

(M8x1.25x45mm)(34) which is pre-assembled on the REAR
SUPPORT(2).

(Pre-assembled on

the bottom side.)

ASSEMBLY INSTRUCTIONS

9

STEP 6: Press in the Button Pin on the ENDCAP(17) and snap an ENDCAP(17) into each side of the

FRONT FRAME(3).

STEP 7: Attach the FRONT FRAME(3) to the UPRIGHT(1) with BUTTON HEAD BOLT(M10x1.5x70mm)

(32) and NYLOCK NUT(M10x1.5)(42). Do not over tighten, the FRONT FRAME(3) should rotate freely.

STEP 6

STEP 8

Lock the FRONT FRAME(3) in position by inserting the LOCKING
PIN(31) through the FRONT FRAME(3) and UPRIGHT(1).

STEP 9

Press the NUT CAP(50) onto the NYLOCK NUT(M10x1.5)(42).

STEP 7

ASSEMBLY INSTRUCTIONS

STEP 10

There is an “R” decal on the RIGHT FRONT SWING ARM(6), and an
“L” decal on the LEFT FRONT SWING ARM(4). Hook the LEFT FRONT

SWING ARM(4) and LEFT REAR SWING ARM(5) onto the PIVOTING
JOINTS(16) on the left side of the UPRIGHT(1).

STEP 12

Secure the LEFT FRONT SWING ARM(4) to the PIVOTING JOINT(16)
with the SUPPORT BRACKET(11) and two BUTTON HEAD BOLTS

(M8x1.25x35mm)(35).

Repeat the above assembly steps for the right side.

STEP 11

Secure the LEFT REAR SWING ARM(5)
to the PIVOTING JOINT(16) with the

SUP P ORT BRACK E T(11) and two
BUTTON HEAD BOLTS(M8x1.25x35mm)
(35).

10

L

R

ASSEMBLY INSTRUCTIONS

STEP 13: There is an “R” decal on the RIGHT PEDAL ARM ASSEMBLY(8, 14), and an “L” decal on the

LEFT PEDAL ARM ASSEMBLY(8, 15). Attach the LEFT PEDAL ARM ASSEMBLY(8, 15) to the JOINT
PLATES(12) attached to the LEFT SWING ARMS(4, 5) with BUTTON HEAD BOLT(M8x1.25x73mm)(33),
LOCK WASHER(M8)(49), and NYLOCK NUT(M8x1.25)(43). NOTE: Make sure that all three BUTTON HEAD
BOLTS(M8x1.25x73mm)(33) and NYLOCK NUTS(M8x1.25)(43) are tightened enough so that the LEFT
PEDAL ARM ASSEMBLY(8, 15) will stay in its upright position when folded up. Repeat on the right side.

STEP 14

Slide the JOINT COVERS(18) in place on all four SWING ARMS
(4, 5, 6, and 7) on both sides.

11

STEP 13 STEP 13, NOTE

L

R

ASSEMBLY INSTRUCTIONS

STEP 15

Insert the LEFT HANDLEBAR(10) into the RIGHT HANDLEBAR(9)
and place them on the bracket on the UPRIGHT(1).

STEP 16

Secure the RIGHT and LEFT HANDLEBARS(9, 10) and the METER
BRACKET(13) to the UPRIGHT(1) with two BUTTON HEAD BOLTS
(M8x1.25x35mm)(35).

STEP 17

Install an AA battery into the METER(39), the battery is not included.
See page 14 for detailed battery installation instructions. Slide the

METER(39) onto the METER BRACKET(13). Plug the SENSOR
WIRE(40) into the METER(39), and push the excess wire into the
UPRIGHT(1).

12

U S A G E G U I D E

Before you start

GETTING ON AND OFF SECURE FOOT PEDALS

Getting the most out of your Stamina® 9161 workout

The Stamina® 9161 offers a challenging lower-body workout that also improves

your cardiovascular tness. You will work and tone every part of your legs--thighs,
hips, hamstrings and calves—while you exercise your heart and lungs.
The Stamina® 9161 stride suspends you in the air while you move, so while the
forward motion closely resembles walking and running, there is no jarring impact
that might cause injury. The arcing steps that never let you touch the ground
keep your workout safe and comfortable.

The Stamina® 9161 can be used in a scissor motion, a lateral motion, a circular
motion, and a skating motion. You will tone and strengthen your inner and outer
thighs along with your quads and calves.

Hold both handles rmly in your hands when getting on
or off the Stamina® 9161.

The foot pedals have a non-skid surface that offers

plenty of stability.

FAMILIARIZE YOURSELF WITH THE
FITNESS MONITOR.

This monitor has extra features that will help you
track your progress to keep you motivated. It tracks
basic tness data: time, count, calories, total count,
and can be set to scan all stays while you work out.
Complete monitor instructions are on page 14.

FOLD AND STORE

The Stamina® 9161 can be folded and stored away in

a corner or closet.

STAND AND STRIDE ACTIVELY

Look forward with your head up and balanced. In
proper position, you should be standing up tall with
feet on the pedals, grasping the handlebars.

The Workout

• Wear appropriate footwear.

• Warm up before your workout.

• Always hold the handles when using the Stamina® 9161.

• Place your dominant foot (if you are right-handed you right

foot will be your dominant foot) on the corresponding foot

pedal rst, then your non-dominant foot.

• Increase the difculty of your workouts gradually as your
tness improves.

• Begin with a simple, slower workout if you’re just starting an
exercise plan.

• Follow the workout that ts your tness level and goals
(beginner, intermediate, or advanced workouts) shown on
the Stamina® 9161 wall chart.

• Always cool down and stretch following your Stamina® 9161
session.

WORKS THESE

MUSCLE GROUPS

1. Abdominals

2. Quadriceps

3. Triceps

4. Gluteals

5. Hamstring

6. Calf

7. Knee

8. Erector Spinae

9. Ankles

10. Biceps

7

1

10

2

3

4

6

9

5

8

13

STAMINA® 9161

1. Rechargeable batteries are not recommended.

NOTE:

1. Open the Battery Door on the back of the METER(39).

2. The METER(39) operates with an AA battery, the battery is not

included. Refer to the illustration to install or replace the batteries.

HOW TO INSTALL AND REPLACE BATTERIES:

Pedal movement or press any button.
Automatic shut off after four minutes of inactivity.

POWER ON :

POWER OFF :

FUNCTION BUTTONS:

MODE :

RESET :

Press to select display functions, include SCAN,
TIME, COUNT, CALORIES, and TOTAL COUNT.

Press and hold for three seconds to reset all
functions to zero, except TOTAL COUNT.
Press to reset all functions to zero, including

TOTAL COUNT.

SCAN:

TIME:

COUNT

:

CALORIES:

TOTAL COUNT :

NOTE: The meter will stop counting time automatically after four seconds of inactivity. All function

values will be kept. Restart the meter by pedal movement or press any button.
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the MODE button and hold it down for three seconds to reset all functions
to zero, except TOTAL COUNT. Or press the RESET button to reset all functions to zero.

USING THE FITNESS METER

1.

2.

AA Battery

OPERATIONAL INSTRUCTIONS

FUNCTIONS:

Automatically scans each function of TIME, COUNT, CALORIES, and TOTAL COUNT
in sequence with change every four seconds. Press and release the MODE button until
“SCAN” appears on the display.

Displays the time from one second up to 99:59 minutes.

Displays the total number of strides you have taken from zero to 9999 strides.

Displays the calorie consumption from zero to 999.9 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.

Displays the total accumulated number of strides you have taken from zero to 9999 strides.

SCAN TI ME CO UNT CAL TO TAL CO UNT

D

O

E

M

S

E

E

T

R

14

The safety and integrity designed into the Stamina® 9161 can only be maintained when the Stamina®
9161 is regularly examined for damage and wear. Special attention should be given to the following:

1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.

Tighten loose nuts and bolts.

2. Verify that the WARNING LABEL(51) is in place and easy to read. Call Stamina Products immediately

at 1-800-375-7520 for a replacement WARNING LABEL(51) if it is missing or damaged.

3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

4. Worn or damaged components shall be replaced immediately or the Stamina® 9161 removed from

service until repair is made.

5. Only Stamina Products supplied components shall be used to maintain/repair the Stamina® 9161.

6. Keep your Stamina® 9161 clean by wiping it off with an absorbent cloth after use.

MAINTENANCE

15

OPERATIONAL INSTRUCTIONS

SAFETY PRECAUTIONS

The remarkable design of the Stamina® 9161 allows the

PEDALS(14, 15) to move front and back as well as side
to side freely. Be careful to maintain your balance while
using, mounting, and dismounting. Follow the instructions
below to safely operate the Stamina® 9161:

1. To maintain y o u r ba l a nce, always h o l d th e

HANDLEBARS(9, 10) with both hands while using,
mounting, and dismounting.

2. In order to avoid use by someone unfamiliar with the

Stamina® 9161, always fold up the PEDAL ARMS(8)
as shown.

STORAGE

16

1. To store the Stamina® 9161, simply keep it in a clean dry place.

2. To avoid damage to the METER(39), remove the battery before storing the Stamina® 9161 for one

year or more.

3. Grasp the HANDLEBARS(9, 10) and the REAR SUPPORT(2) to move the Stamina® 9161. Do not

use the PEDAL ARMS(8) and SWING ARMS(4, 5, 6, and 7) to move the Stamina® 9161. These

moving parts will move and may pinch your hand or ngers.

Follow the following procedure to fold the Stamina® 9161 for
easy storage.

Folding The Stamina® 9161

A. Remove the LOCKING PIN(31) from the FRONT FRAME(3).

B. Fold the FRONT FRAME(3) toward the UPRIGHT(1) and lock

in position with the LOCKING PIN(31).

C. The Stamina® 9161 will look as shown in illustration C.

D. Refer to illustration D. Fold up both of the PEDAL ARMS(8).

The Stamina® 9161 is now ready for storage.

C

B

31

3

1

D

8

8

A

31

3

1

How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.

Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.

Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or

three ngers on your wrist and take a six second heartbeat count. Multiply
the results by ten to nd your heart rate. For example, if your six second

heartbeat count is 14, your heart rate is 140 beats per minute. A six second
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.

wrist pulse

Remember to follow these essentials:

Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.

Take your pulse periodically during your workout and strive to stay within a range of 60% (lower

intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically t.

If you feel dizzy or lightheaded you should slow down or stop exercising.

To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.

CONDITIONING GUIDELINES

Target Heart Rate Zone Estimated by Age*

* For cardiorespiratory training benefits, the American College of Sports Medicine recommends

working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the

maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate

20 years

25 years

30 years

35 years

40 years

45 years

50 years

55 years

60 years

65 years

70 years

Average Maximum

Heart Rate 100%

Age

110-180 beats per minute

107-175 beats per minute

105-171 beats per minute

102-166 beats per minute

99-162 beats per minute

97-157 beats per minute

94-153 beats per minute

91-148 beats per minute

88-144 beats per minute

85-139 beats per minute

83-135 beats per minute

200 beats per minute

195 beats per minute

190 beats per minute

185 beats per minute

180 beats per minute

175 beats per minute

170 beats per minute

165 beats per minute

160 beats per minute

155 beats per minute

150 beats per minute

Target Heart Rate Zone

(55%-90% of Maximum Heart Rate)

17

WARM-UP and COOL-DOWN

Warm-Up

The purpose of warming up is to prepare your body for exercise and to minimize injuries.

Warm up for two to ve minutes before strength training or aerobic exercising. Perform activities that

raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place

Stretching

Stretching while your muscles are warm after a proper warm-up and again after your

strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.

Suggested Stretching Exercises

Remember to always check with your physician before starting any exercise program.

Cool-Down

The purpose of cooling down is to return the body to its normal, or near normal, resting

state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be

completed after each strength training session.

Lower Body Stretch

Place feet shoulder-width

apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.

DO NOT BOUNCE!

When the pull on the back of
the legs lessens, gradually
try a lower position.

Floor Stretch

While sitting on the oor,

open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.

DO NOT BOUNCE!

Do this stretch 10 times.
Repeat the stretch with the
left leg.

Bent Over Leg Stretch

Stand with feet shoulder-

width apart and lean forward

as illustrated. Using the

arms, gently pull the upper
body towards the right leg.
Let the head hang down.

DO NOT BOUNCE!

Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.

Bent Torso Pulls

While sitting on the oor,

have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.

18

LIMITED WARRANTY

WARRANTY

MODEL 55-9161

Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and one year on
the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL

NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE,
MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY
REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED
BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health

clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the

product's use is in furtherance of a prot making enterprise, and all other use which is not for personal,

family, or household purposes.

To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
Springeld Missouri, USA, 65801-1071, or email us at [e-mail], or
call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to
return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH

OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE

DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR

BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER

DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF
ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY
IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any

implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,

at the purchaser's expense, to the Warrantor's premises in Springeld, Missouri. Return of the enclosed

warranty registration card is not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.

Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS

OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY
IMPLIED WARRANTY.

This limited warranty is the only written or express warranty given by Stamina Products, Inc. This

warranty gives you specic legal rights, and you may also have other legal rights which vary from state

to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.

The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods
to disclaim or limit implied warranties and consequential and incidental damages with respect thereto.
If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages with respect thereto shall be disregarded and shall
be deemed not to have been made to the extent necessary to comply with such legal restriction.

19

PRODUCT PARTS DRAWING

20

FRONT

BACK

PART# PART NAME QTY

PARTS LIST

21

1 Upright 1

2 Rear Support 1
3 Front Frame 1
4 Left Front Swing Arm 1
5 Left Rear Swing Arm 1
6 Right Front Swing Arm 1
7 Right Rear Swing Arm 1
8 Pedal Arm 2
9 Right Handlebar 1
10 Left Handlebar 1
11 Support Bracket 4
12 Joint Plate 4
13 Meter Bracket 1
14 Right Pedal Cap 1
15 Left Pedal Cap 1
16 Pivoting Joint 4
17 Endcap 4
18 Joint Cover 4
19 Foam Grip 2

20 Round Plug (ø50.8mm) 1
21 Rectangular Plug (25 x 50mm) 2
22 Dome Plug (ø25mm) 4
23 Joint Bushing (35mm) 8

24 Spacer 4
25 Stopper Roller 2

26 Round Plug (ø25.4mm) 2

27 Swing Arm Bushing 8
28 Pedal Arm Bushing 12
29 Grommet Plug 1
30 Sensor Grommet Plug 1
31 Locking Pin 1

32 Bolt, Button Head (M10 x 1.5 x 70mm) 1
33 Bolt, Button Head (M8 x 1.25 x 73mm) 6
34 Bolt, Button Head (M8 x 1.25 x 45mm) 1
35 Bolt, Button Head (M8 x 1.25 x 35mm) 10
36 Bolt, Button Head (M8 x 1.25 x 14mm) 4
37 Screw, Round Head (M6 x 25mm) 4

38 Shaft 2
39 Meter 1
40 Sensor Wire 1
41 Magnet 1

42 Nylock Nut (M10 x 1.5) 1
43 Nylock Nut (M8 x 1.25) 6
44 Large Washer (ø26 x ø38 x 1mm thick) 4
45 Large Washer (ø26 x ø42 x 1mm thick) 4
46 Arc Washer (M8) 4
47 C Ring (25mm) 4
48 C Ring (8mm) 2
49 Lock Washer (M8) 2
50 Nut Cap (M10) 1

51 Warning Label 1

52 Allen Wrench (5mm) 1

53 Wrench 1
54 Manual 1

NOTES

22

Model Number: ...................................................................................... Serial Number: .............................................................................................

Product Name: ..................................................................................................................................................................................................................................

Place Purchased: ..............................................................................................................................................................................................................................

Date of Purchase: .................................................................................. Purchase Price: ............................................................................................

First Name: ............................................................................................ Last Name: ...................................................................................................

City: .................................................................. State: ................................................................ Zip Code: .................................................

Email Address: ....................................................................................... Phone #: ( ) ......................................................................................

Would you like to receive email information or special offers from Stamina Products?* ____Yes ____No

*If yes, be sure your email address is included above.

Stamina Products, Inc.

P.O. Box 1071

Springeld, MO 65801-1071

If there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions,
please contact customer service. Do not return the product. To order parts by mail, fill out the sheet below and fax it to

417-889-8064. The part will be mailed to your address.

Mr./Ms: ..............................................................................................................................................................................................................................................

Address: ........................................ ............................................................................................. Apt. #:..........................................................................

City: .................................................................. State: ................................................................ Zip Code: .................................................

IMPORTANT : We must have your phone number to process the order!

Phone #: ( ) ................................................................................ Work Phone #: ( ) .............................................................................

Date of Purchase: ..................................................................................

Model #: ............................................................................................................................................................................................................................................

Purchased From: ..............................................................................................................................................................................................................................

IMPORTANT : Before lling out the form below make sure you have the correct information.

Refer to the parts list to make sure you're ordering the right parts!

Stamina Products, Inc.

P.O. Box 1071

Springeld, MO 65801-1071

Detach and Mail or Fax the Form Above

TO REGISTER YOUR PRODUCT

TO CONTACT CUSTOMER SERVICE

TO ORDER PARTS

TO CONTACT CUSTOMER SERVICE

For your co nvenience, Stamina’s customer service r epres entatives can be reached by emai l a t customerservice@
staminaproducts.com or by phone at 1-800-375-7520 (in the U.S.). Our customer service representatives are available Monday

through Thursday from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.

TO REGISTER YOUR PRODUCT

Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071 Springeld, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model

number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your
product) ready.

If you don’t have internet access, you can call customer service at 1-800-375-7520, or ll out and mail the product registration
form below to Stamina Products, Inc.; P.O. Box 1071; Springeld, MO 65801-1071.

PRODUCT REGISTRATION FORM

TO ORDER PARTS

Detach and Mail or Fax the Form Below

PARTS ORDER FORM

PART # DESCRIPTION QUANTITY

1 Rear Unit Assembly 1

EXAMPLE: