Page 1
HOW TO OPEN THE SAFE
Accessories list
Desiccant
1PC
Bolts
4PC
Batteries
4PC
Carpet
1PC
Emergency key
2PC
Master key
2PC
Step1: Push the cover to the right, then insert the
emergency key and turn to the left.
Step2: Push the cover to the left, then turn the
master key to the right. Open the safe
door.
Step1: When door is open, open the battery compartment and insert
batteries.
Step2: Change user code (original code is 1234)
Push the Reset button. You then have 15 seconds to input a
new use code (3-8 digits). Then press “#” to confirm it. The
screen will say ‘in.’
Step3: Change master code (original code is 123456)
Use the original master code to open the safe. The screen
will say ‘open.’ Within 7 seconds press ‘*’ and input a new
master code. Press ‘#’ to confirm. The screen will say ‘in.’
Step4: Set the alarm
Press 0. The screen will show ALARM ON. Input the user
or master code to turn off the alarm.
Step5: Set the date and time
When system is in sleep mode, press “*” to set the date and
time. Date format: YY-MM-DD Time format: HH-MM-SS
Step1: Place safe against wall.
Step2: Mark where holes need to be drilled.
Step3: Drill holes.
Step4: Place expansion bolts in holes.
Step5: Align holes in safe with expansion bolts
on the wall. Place screws and tighten.
Instructions
HOW TO SET USER CODE AND MASTER CODE
INSTALLING THE SAFE
Page 2
NOTE
PLEASE NOT TO LEFT YOUR EMERGENCY KEY INTO YOUR SAFE
AND CHANGE USRE CODE AND MASTER CODE
Loading...