Stairville LED Flood Panel 150 Owner's Manual
Owner‘s Manual
LED Flood Panel 150
LED Panel controllable by DMX
LED Flood Panel 150
2
Contents
Safety notes ........................................................................................................................................3
Power supply .............................................................................................................................3
Operating conditions .................................................................................................................. 3
Installation ...........................................................................................................................................4
Setup ...................................................................................................................................................4
Connections in DMX mode ........................................................................................................4
Connections in Master/Slave mode ...........................................................................................4
DMX sockets ..............................................................................................................................4
Components and functions .................................................................................................................5
Front and rear side .....................................................................................................................5
Operation panel and connectors ................................................................................................5
Operation ............................................................................................................................................6
Main menu ................................................................................................................................. 6
Built-in programs mode ..............................................................................................................6
Settings for program 01 .............................................................................................................6
Settings for programs 02…10 ....................................................................................................6
Auto show mode ........................................................................................................................7
Master/Slave mode ....................................................................................................................7
Sound mode ..............................................................................................................................7
DMX mode .................................................................................................................................7
Functions in 3-channel DMX mode ...........................................................................................7
Functions in 4-channel DMX mode ...........................................................................................7
Functions in 8-channel DMX mode ...........................................................................................8
Menu diagram ...................................................................................................................................10
Troubleshooting ................................................................................................................................ 11
The device does not work at all ............................................................................................... 11
No response to the DMX controller ..........................................................................................11
Cleaning ............................................................................................................................................ 11
Technical data ...................................................................................................................................12
Protecting the environment ...............................................................................................................12
Disposal of the packaging material .......................................................................................... 12
Disposal of your old device ...................................................................................................... 12
www.thomann.de
3
Safety notes
Read all safety notes and all instructions. Failure to follow the notes and instructions may result in electric
shock, re or serious injury.
Save this manual for future reference.
DANGER
Electric shock caused by high voltages inside!
Within the unit there are areas where high voltages may be present. To reduce the risk of
electric shock do not remove any covers unless the AC mains power cord is removed. Cov-
ers should be removed by qualied service personnel only.
There are no user-serviceable parts inside.
DANGER
Electric shock caused by short circuit!
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or re. If in doubt, seek advice from a registered electrician.
WARNING
Eye damage caused by high intensity!
Never look directly into the light source.
WARNING
Risk of epileptic shock!
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should
avoid looking at strobe lights.
Power supply
Notice
Malfunction or damage to equipment!
• Ensure that the input voltage (AC outlet) matches the voltage rating of the product. Failure to do so could
result in damage to the product and possibly the user.
• Unplug the unit before electrical storms occur and when unused for long periods of time.
Operating conditions
Always install and use the device in accordance with these instructions.
Notice
Malfunction or damage to equipment!
• This device has been designed for indoor use only. Do not expose the device to any liquid or moisture.
• Do not install the unit near any direct heat source. Keep the unit away from naked ames.
• Do not block areas of ventilation. Failure to do so could result in re.
LED Flood Panel 150
4
Installation
You can install the device on the wall, the ceiling or on the ground.
WARNING
Injuries caused by falling parts!
Make sure that the installation complies with the standards and rules that apply in your country.
Always secure the device with a secondary safety attachment, such as a safety cable or a
safety chain.
Setup
The required connections depend on the operation mode of the device.
Notice
Malfunction or damage to equipment!
• For failure-free operation of the DMX chain use dedicated DMX cables. Never use ordinary microphone
cables.
• Never connect the DMX output to audio devices such as mixers or ampliers. The voltages used on the
DMX lines may severely damage the audio input circuits.
Connections in DMX mode
Connect the DMX input of the device to the DMX output socket of a DMX controller or another DMX device.
Connect the output of the rst DMX device to the input of the second one, and so on to form a daisy chain.
Always ensure that the output of the last DMX device in the daisy chain is terminated with a 120-Ω resistor.
When the device is congured for DMX mode, but no DMX signal is being received, the DMX indicator ashes.
If no DMX cable is connected, the DMX indicator is constantly on.
Connections in Master/Slave mode
Connect the DMX output of the master device to the DMX input of the rst slave device. Leave the DMX input
of the master device open. Then connect the DMX output of the rst slave device to the DMX input of the sec-
ond slave device and so on.
DMX sockets
A female 3-pin XLR connector is used for the DMX output, a male 3-pin XLR connector for the DMX input. The
gure below and the following table show the pin assignment.
3
1
2
1 Ground
2 DMX data (–)
3 DMX data (+)
Loading...