7.1 Starting up the device.................................................................................................................... 39
7.2 Main menu.......................................................................................................................................... 41
7.3 Menu overview................................................................................................................................. 44
7.4 Functions in DMX mode................................................................................................................ 45
12Protecting the environment.............................................................................................................. 58
showlaser
4
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
DJ Lase GR-140 RGY MKII
5
General information
1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
DownloadThis manual is also available as PDF le for you to download.
Keyword search
Online guides
Personal consultation For personal consultation please contact our technical hotline.
Service
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Our online guides provide detailed information on technical basics
and terms.
If you have any problems with the device the customer service will
gladly assist you.
showlaser
6
1.2 Notational conventions
This manual uses the following notational conventions:
General information
Letterings
Displays
The letterings for connectors and controls are marked by square brackets and italics.
Examples:[VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’.
DJ Lase GR-140 RGY MKII
7
General information
Instructions
The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1.Switch on the device.
2.Press [Auto].
3.Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Automatic operation is started.
ð
showlaser
8
General information
Signal wordMeaning
DANGER!This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING!This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE!This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signsType of danger
Warning – high-voltage.
Warning – laser radiation.
DJ Lase GR-140 RGY MKII
9
General information
Warning signsType of danger
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
10
showlaser
2 Safety instructions
Safety instructions
Intended use
This device is intended to be used for the projection of laser light eects. It has been designed
exclusively for show applications. Use the device only as described in this user manual. Any
other use or use under other operating conditions is considered to be improper and may result
in personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DJ Lase GR-140 RGY MKII
11
Safety instructions
Laser safety basics
Laser safety requirements are based on DIN EN 60825-1:2015. The corresponding accident pre‐
vention regulation of the Accident Prevention and Insurance Association in Germany is BGVB2.
This device contains a class-3B laser. It comes equipped with a safety key and a jack for con‐
necting an external safety switch. Always remove the key when the device is not attended by a
trained operator.
As an operator you are responsible for the safety of all persons present. Familiarize yourself
with the laser safety regulations that apply in your country. To ensure safe operation, it is
important to pay attention to the following instructions.
Prior to commissioning, the company/operator must appoint a qualied person as laser pro‐
tection ocer in writing and notify the operation of the laser equipment to the Accident Pre‐
vention and Insurance Association and to the authority responsible for occupational safety. In
the event of public use, the complete laser equipment must be approved by an expert prior to
commissioning.
showlaser
12
Safety
Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DJ Lase GR-140 RGY MKII
13
Safety instructions
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or re. If in doubt, seek advice from a regis‐
tered electrician.
14
showlaser
Safety instructions
DANGER!
Laser radiation – avoid exposure to beam
The device contains a class-3B laser, classied according to EN 60825-1:2015. Do
not look into the laser beam. The laser beam can injure your eyes when you
directly look into it. Do not expose yourself to the laser beam. The laser beam can
cause skin burns.
In this context take extreme care when using converging optical instruments.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
DJ Lase GR-140 RGY MKII
15
Safety instructions
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Laser radiation – risk of re
Keep the area exposed to laser radiation free from ammable substances.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
16
showlaser
Safety instructions
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
DJ Lase GR-140 RGY MKII
17
Safety instructions
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
18
showlaser
Safety instructions
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
DJ Lase GR-140 RGY MKII
19
Features
3 Features
The showlaser is specially suited for discos, clubs, bars, small stages, etc. It allows smooth inte‐
gration into light shows, but can also be operated as stand-alone device.
Special features of this device:
n Control via DMX (5 channels), infrared remote control and buttons plus display on the unit
itself
n Built-in automatic show programmes
n Sound control
n Master/slave mode
n Laser diodes: Red (100 mW, green (40 mW)
20
showlaser
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.