Stahlin The Fatboy Series Specifications

The Fatboy Series

SSH

Industry’s unique requirement for extra deep enclosure without

significantly increasing the length and width of the enclosure is met

with Stahlin’s extra deep Fatboy series.

The Fatboy series is a clam shell style enclosure, noted by near

equidistant capacity in both the cover and base. The series employs

a flange mount base for ease of installation, a stainless steel full

length hinge and stainless steel securing latch. Door clearance to the

installed equipment must be considered when specifying this

enclosure.

The demands for cover mounted components such as DIN facings or

multiple contact pushbuttons are met with ample depth from the

cover or with substantial height for panel mounted components.

Fatboy Series

Fatboy Series Attributes

●

Available in 2 cover options:

1. Opaque Cover

2. Flush Bonded Window

●

Clam shell design, opening from the middle of the enclosure

●

All stainless latches and hardware

●

Memory retaining polyurethane gasket between cover and bases

●

Full length stainless steel hinge

●

Chemically resistant fiberglass reinforced polyester

●

Integral mounting flange

SSH Industry Standards

UL/cUL 50 File E64358 Type 1, 3R, 4X, 12

NEMA 250 Type 1, 3R, 4X, 12

CSA Std C22.2 File LR069014 Type 1, 3R, 4X, 12

Temperature Range (-76°F to +274°F) (-60°C to +134°C)

Temperature Range Window (-26°F to +170°F) (-32°C to +76°C)

Flammability Rating UL94-5V

Window Flammability UL94-HB

Self extinguishing Non-halogenated, non-flame propagating

Chemical Resistance Full chemical resistance charts listed in appendix

NFPA No. 101 Flame Spread Class A (1)

100

Stahlin Enclosures•500 Maple Street, Belding, MI 48809 •Phone: [phone] •Fax: [phone] •www.stahlin.com

Technical Specifications - Fatboy Series

Opaque Cover “SSH” configuration - Hinged, padlock latch

SSH

SSH

Construction

Material Hot compression molded fiberglass reinforced polyester (thermoset)
Gasket Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

Pan head screws Minimized protruding surfaces
Stainless Steel Hardware 300 Series stainless used on all external hardware
Molded in Mounting Flange Molded in flange for ease of mounting.
Mounting Bosses Panel mounting capability for fixed rear panel
Metal inserts Back panel utilizes threaded brass inserts accepting 10-32 screws
Soft Edge Design Rounded edges, minimal protrusions or exposed pocket areas for

assembly of dust and debris

SSH

NOTES:

SSH

SSH

Industry Standards

UL/cUL 50 File E64358 Type 1, 3R, 4X, 12
NEMA 250 Type 1, 3R, 4X, 12
CSA Std C22.2 File LR069014 Type 1, 3R, 4X, 12
Temperature Range (-76°F to +274°F) (-60°C to +134°C)
Flammability Rating UL94-5V
Self Extinguishing Non-halogenated, non-flame propagating
Chemical Resistance Full chemical resistance charts listed in appendix
NFPA No. 101 Flame Spread Class A (1)

Accessories

Back Panels

Aluminum BP__AL pg. 149 - 150
Fiberglass BP__FG pg. 149 - 150
Stainless Steel BP__SS pg. 149 - 150
Painted Carbon Steel BP__CS pg. 149 - 150

Accessories

Drain & Breather Vents pg. 144, 146
Hole Plugs pg. 145
Assorted Hubs and Cord Grips pg. 145, 148
All Other Accessories pg. 144 - 159

Fatboy Series

SSH

Stahlin Enclosures•500 Maple Street, Belding, MI 48809 •Phone: [phone] •Fax: [phone] •www.stahlin.com

Modifications

Custom Colors pg. 12 - 13
Silk Screening pg. 12 - 13
EMI/RFI Shielding pg. 12 - 13
Custom Window pg. 12 - 13
Custom Cutouts/Holes pg. 12 - 13

101