Stahlin RJW Series Specifications
HLL
RJW
Flush Bonded Window “HLL” configuration - Hinged, twist latch
Technical Specifications - RJW Series
NOTES:
Custom Colors pg. 12 - 13
Silk Screening pg. 12 - 13
EMI/RFI Shielding pg. 12 - 13
Custom Window pg. 12 - 13
Custom Cutouts/Holes pg. 12 - 13
Accessories
Modifications
Back Panels
Aluminum BP__AL pg. 149 - 150
Fiberglass BP__FG pg. 149 - 150
Stainless Steel BP__SS pg. 149 - 150
Painted Carbon Steel BP__CS pg. 149 - 150
Accessories
Drain & Breather Vents pg. 144, 146
Hole Plugs pg. 145
Assorted Hubs and Cord Grips pg. 145, 148
All Other Accessories pg. 144 - 159
HLL
HLL
Construction
Material Hot compression molded fiberglass reinforced polyester
Gasket Poured polyurethane seamless gasket provides watertight,
dust-tight environmental seal
Stainless Steel Hardware 300 Series stainless used on all external hardware
Molded in Mounting Flange Integral flange molded in place for ease of mounting
Mounting Bosses Panel mounting capability for fixed rear panel
Metal Inserts Back panel utilizes threaded brass inserts accepting 10-32 screws
Bonded Window Precision routed flush bonded Super Abrasion Resistant acrylic
material for maximum visibility
Raised Cover Extended depth in cover
HLL
Industry Standards
UL/cUL 50 File E64358 Type 1, 3R, 4X, 6P, 12
NEMA 250 Type 1, 3R, 4X, 6P, 12
CSA Std C22.2 File LR069014 Type 1, 3R, 4X, 6P, 12
Temperature Range (-76°F to +274°F) (-60°C to +134°C)
Window Temperature Range (-26°F to +170°F) (-32°C to +76°C)
Flammability Rating UL94-5V
Window Flammability UL94V-HB
Self Extinguishing Non-halogenated, non-flame propagating
Chemical Resistance Full chemical resistance charts listed in appendix
NFPA No. 101 Flame Spread Class A (1)
HLL
RJW Series
HPL
RJW
Flush Bonded Window “HPL” configuration - Hinged, padlock latch
Technical Specifications - RJW Series
NOTES:
Custom Colors pg. 12 - 13
Silk Screening pg. 12 - 13
EMI/RFI Shielding pg. 12 - 13
Custom Window pg. 12 - 13
Custom Cutouts/Holes pg. 12 - 13
Accessories
Modifications
Back Panels
Aluminum BP__AL pg. 149 - 150
Fiberglass BP__FG pg. 149 - 150
Stainless Steel BP__SS pg. 149 - 150
Painted Carbon Steel BP__CS pg. 149 - 150
Accessories
Drain & Breather Vents pg. 144, 146
Hole Plugs pg. 145
Assorted Hubs and Cord Grips pg. 145, 148
All Other Accessories pg. 144 - 159
HPL
HPL
Construction
Material Hot compression molded fiberglass reinforced polyester
Gasket Poured polyurethane seamless gasket provides watertight,
dust-tight environmental seal
Stainless Steel Hardware 300 Series stainless used on all external hardware
Molded in Mounting Flange Integral flange molded in place for ease of mounting
Mounting Bosses Panel mounting capability for fixed rear panel
Metal Inserts Back panel utilizes threaded brass inserts accepting 10-32 screws
Bonded Window Precision routed flush bonded Super Abrasion Resistant acrylic
material for maximum visibility
Raised Cover Extended depth in cover
HPL
Industry Standards
UL/cUL 50 File E64358 Type 1, 3R, 4X, 6P, 12
NEMA 250 Type 1, 3R, 4X, 6P, 12
CSA Std C22.2 File LR069014 Type 1, 3R, 4X, 6P, 12
Temperature Range (-76°F to +274°F) (-60°C to +134°C)
Window Temperature Range (-26°F to +170°F) (-32°C to +76°C)
Flammability Rating UL94-5V
Window Flammability UL94V-HB
Self Extinguishing Non-halogenated, non-flame propagating
Chemical Resistance Full chemical resistance charts listed in appendix
NFPA No. 101 Flame Spread Class A (1)
HPL
RJW Series
Loading...