Stahlin NW Series Specifications

Technical Specifications - NW Series - Bonded Window

“HWT” configuration - Stainless steel hinged, latched down cover

HWT

NW

NOTES:

HWT

HWT

Construction

Material Hot compression molded fiberglass reinforced polyester,

hand layup FRP

Gasket Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

Stainless Steel Hardware 300 Series stainless used on all hardware
Mounting Bosses Panel mounting capability for fixed rear panel
Metal inserts All bosses utilize threaded brass inserts accepting 10-32 screws
Soft Edge Design Rounded edges, minimal protrusions or exposed pocket areas for

assembly of dust and debris

Bonded Window Precision routed flush bonded Super Abrasion Resistant acrylic

material for maximum visibility

Industry Standards

UL/cUL 50 File E64358 Type 1, 3, 3R, 4X, 12
NEMA 250 Type 1, 3, 3R, 4X, 12
CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12
Temperature Range (-76°F to +274°F) (-60°C to +134°C)
Temperature Range Window (-26°F to +170°F) (-32°C to +76°C)
Flammability Rating UL94-5V
Window Flammability UL94V-HB
Self Extinguishing Non-halogenated, non-flame propagating
Chemical Resistance Full chemical resistance charts listed in appendix

HWT

Accessories

Back Panels

Aluminum BP__AL pg. 149, 151
Fiberglass BP__FG pg. 149, 151
Stainless Steel BP__SS pg. 149, 151
Carbon Steel BP__CS pg. 149, 151

Accessories

Drain & Breather Vents pg. 144, 146
Hole Plugs pg. 145
Assorted Hubs and Cord Grips pg. 145, 148

N Series

All Other Accessories pg. 144 - 159

HWT

Modifications

Custom Colors pg. 12 - 13
Silk Screening pg. 12 - 13
EMI/RFI Shielding pg. 12 - 13
Custom Window pg. 12 - 13
Custom Cutouts/Holes pg. 12 - 13

134

Stahlin Enclosures•500 Maple Street, Belding, MI 48809 •Phone: [phone] •Fax: [phone] •www.stahlin.com